Skip to content

Latest commit

 

History

History
88 lines (62 loc) · 3.54 KB

README.md

File metadata and controls

88 lines (62 loc) · 3.54 KB

AVM FRITZ! Binding

The binding integrates the AHA ( AVM Home Automation ) system.

Supported Things

FRITZ!Box

The well known FRITZ!Boxes are supported as bridge for accessing other AHA devices. It is planned to support some channels directly at the bridge like call monitoring and others - but these things are under current development by now. The Box has to run at least on firmware FRITZ!OS 6.00 and hast to support the "Smart Home" service.

FRITZ!DECT 200

This switchable outlet has to be connected to a FRITZ!Box by DECT protocol. It supports switching the outlet, current power and accumulated energy consumption and temperature readings.

FRITZ!Powerline 546E

This powerline adapter can be used via the bridge or in standalone mode. It supports switching the outlet and current power and energy consumption readings. This device does not contain a temperature sensor.

Discovery

The FRITZ!Box and the powerline adapter are discovered through UPNP in the local network. When added as things, a username/password has eventually to be set depending on your Box/Powerline security configuration. The credentials given in the settings must have HomeAuto permissions.

If correct credentials are set in the bridge configuration, connected AHA devices are discovered automatically (may last up to 3 minutes).

Thing Configuration

FRITZ!Box

  • ipAddress (mandatory), default "fritz.box"
  • protocol (optional, http or https), default "http"
  • port (optional, 0 to 65335), no default (derived from protocol: 80 or 443)
  • password (optional), no default (depends on FRITZ!Box security configuration)
  • user (optional), no default (depends on FRITZ!Box security configuration)
  • pollingInterval (optional, 5 to 60), default 15 (in seconds)
  • asyncTimeout (optional, 1000 to 60000), default 10000 (in millis)
  • syncTimeout (optional, 500 to 15000), default 2000 (in millis)

FRITZ!Powerline 546E

  • ipAddress (mandatory), default "fritz.powerline"
  • protocol (optional, http or https), default "http"
  • port (optional, 0 to 65335), no default (derived from protocol: 80 or 443)
  • password (optional), no default (depends on FRITZ!Powerline security configuration)
  • pollingInterval (optional, 5 to 60), default 15 (in seconds)
  • asyncTimeout (optional, 1000 to 60000), default 10000 (in millis)
  • syncTimeout (optional, 500 to 15000), default 2000 (in millis)

AHA things connected to FRITZ!Box bridge

  • AIN (mandatory), no default (AIN number of device)

Channels

Channel Type ID Item Type Description Available on thing
temperature Number Actual measured temperature FRITZ!DECT 200
energy Number Accumulated energy consumption FRITZ!DECT 200, FRITZ!Powerline 546E
power Number Current power consumption FRITZ!DECT 200, FRITZ!Powerline 546E
outlet Switch Switchable outlet FRITZ!DECT 200, FRITZ!Powerline 546E

Full Example

demo.things:

Bridge avm:fritzbox:192.168.178.1 [ ipAddress="192.168.0.64" ] {
	FRITZ_DECT_200 DECT1 [ ain="xxxxxxxxxxx" ]
	FRITZ_Powerline_546E PL1 [ ain="yy:yy:yy:yy:yyy" ]
}

demo.items:

Number Temp { channel="avmfritz:FRITZ_DECT_200:1:DECT1:temperature" }
Switch Outlet2 { channel="avmfritz:FRITZ_Powerline_546E:1:PL1:outlet" }

demo.sitemap:

sitemap demo label="Main Menu"
{
	Frame {
		Text item=Temp
		Switch item=Outlet2
	}
}