Does this work with the TONEX original pedal?

[Cose-3D]

It would be awesome to control the original TONEX pedal via bluetooth and not use an external MIDI bluetooth receiver so I was asking if anyone had already tried.

[Wallygatorr]

That is absolutely not possible, as both of Tonex pedals does not have BT. In some setups I am using Airstep controller with WIDI device connected to Tonex (or other device), sometimes chaining other devices down flow by wired midi.

[Cose-3D]

That is absolutely not possible, as both of Tonex pedals does not have BT. In some setups I am using Airstep controller with WIDI device connected to Tonex (or other device), sometimes chaining other devices down flow by wired midi.

I already have an esp32 coded as bluetooth receiver and I'm already sending serial MIDI data to control the pedal, it would not be bad to use the USB communication instead because it is more reliable. My question was if this code can work with the ToneX big brother as well.

[Builty]

I don't have the bigger Tonex to check anything, but it sounds like it doesn't have Midi over USB.

[Cose-3D]

I don't have the bigger Tonex to check anything, but it sounds like it doesn't have Midi over USB.

Are we sure?

[Builty]

Oh OK, didn't know that one.
If you wanted to send Midi over USB, it would need the Tonex One USB driver removed and replaced with a different module. A class driver for Midi.
I did try to keep host and device code separated for this kind of thing.

[mchbrk]

I have bigger one too, will try then 😅

Does you @Builty thought about adding OTA? I would love to participate in the project maybe that way 😅🤓

[Builty]

Hi. I've done OTA for some other projects, but the issue on this one is the size of the flash. OTA requires 2 partitions that are both big enough to store the entire app. The app is about 7 MB (4.3B with graphical assets) and some of the platforms have only 8MB total.

[mchbrk]

Uhm... 😅 Fortuatelly as I said I have plenty of devices to test with 😅 Maybe at least for some that would fit??? śr., 26 mar 2025, 22:05 użytkownik Builty ***@***.***> napisał:

…

Hi. I've done OTA for some other projects, but the issue on this one is the size of the flash. OTA requires 2 partitions that are both big enough to store the entire app. The app is about 7 MB (4.3B with graphical assets) and some of the platforms have only 8MB total. — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5ORISLCOOYORKKJ56Z5NT2WMI77AVCNFSM6AAAAABTEWOARSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJVG42DIOBVG4> . You are receiving this because you commented.Message ID: ***@***.***> [image: Builty]*Builty* left a comment (Builty/TonexOneController#31) <#31 (comment)> Hi. I've done OTA for some other projects, but the issue on this one is the size of the flash. OTA requires 2 partitions that are both big enough to store the entire app. The app is about 7 MB (4.3B with graphical assets) and some of the platforms have only 8MB total. — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5ORISLCOOYORKKJ56Z5NT2WMI77AVCNFSM6AAAAABTEWOARSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJVG42DIOBVG4> . You are receiving this because you commented.Message ID: ***@***.***>

[Builty]

It probably could be done on some. Having it on only some of them makes it harder though. Documentation would need to cover both cases, and would need different partition tables for some. And some people will get confused.
I'd avoided it entirely for these reasons.

[mchbrk]

I understand. Fair points somehow 😇 czw., 27 mar 2025, 09:55 użytkownik Builty ***@***.***> napisał:

…

It probably could be done on some. Having it on only some of them makes it harder though. Documentation would need to cover both cases, and would need different partition tables for some. And some people will get confused. I'd avoided it entirely for these reasons. — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5ORIVZTIZEHNTBBDCI4MT2WO4HDAVCNFSM6AAAAABTEWOARSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJXGIZTCOJUGM> . You are receiving this because you commented.Message ID: ***@***.***> [image: Builty]*Builty* left a comment (Builty/TonexOneController#31) <#31 (comment)> It probably could be done on some. Having it on only some of them makes it harder though. Documentation would need to cover both cases, and would need different partition tables for some. And some people will get confused. I'd avoided it entirely for these reasons. — Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5ORIVZTIZEHNTBBDCI4MT2WO4HDAVCNFSM6AAAAABTEWOARSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJXGIZTCOJUGM> . You are receiving this because you commented.Message ID: ***@***.***>