Replies: 8 comments 2 replies
-
|
Linux is the most expansive of all platforms, and probably the hardest to do good comprehensive testing. I noticed your system has plenty of resources which is good. There is a chance that the stability issues may be dependency related - meaning that it is not actually Publii but the tools that Publii depends on that is crashing. These are the middleware pieces that Publii depends on - Sorry - not an answer, just some ideas. I think the troubleshooting might depend on other well verses Linux users digging deep. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your reply.
not sure I have any of those middlewares, which might explain a lot, lol,
or nothing (outside of the deb package I guess)
it is slightly more stable in recent days, install is about a week old
(system & Publii).
I installed the Publii .deb packaged using GDebi as the package manager/app
store app called Discover on kubuntu keeps being throttled (I think) by my
ISP, it just canot update unless I USBC cable tether the local G4 data from
my phone, although not even then (just checking as I type, thinks are the
Kubuntu repositories down?
One should be able to install from that Discover but it get completely
distract by the need to refresh repository info, or just check if it has
changed... Can't install anything from it... <wrong forum for this vent>
But I never leave Publii running, & basically save to disk all the time
like it is 1987.
meika
…On Fri, Jan 3, 2025 at 9:53 AM bjazmoore ***@***.***> wrote:
Linux is the most expansive of all platforms, and probably the hardest to
do good comprehensive testing. I noticed your system has plenty of
resources which is good. There is a chance that the stability issues may be
dependency related - meaning that it is not actually Publii but the tools
that Publii depends on that is crashing. These are the middleware pieces
that Publii depends on -
node.js (20.
*) npm (>= 10.*)
python (>= 2.5.0 && < 3.12.0)
electron (in version used by Publii), electron-packager, node-gyp and gulp
node.js modules installed globally.
Sorry - not an answer, just some ideas. I think the troubleshooting might
depend on other well verses Linux users digging deep.
—
Reply to this email directly, view it on GitHub
<#1925 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAB323HO6O5RRZPOUQKSUJT2IW7ORAVCNFSM6AAAAABUNASQE2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNZSGEZDANQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@meika - unfortunately without any logs it will be very hard to find a reason of such behaviour. Most probably the app returns some error, but it is not logged in and it causes the problem. Please start with opening Publii from console - maybe some errors will appear when the app will disappear without interaction. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, I'll check it out. and wait and watch
thank you
…On Sat, Jan 4, 2025 at 3:55 AM Tomasz Dziuda ***@***.***> wrote:
@meika <https://github.com/meika> - unfortunately without any logs it
will be very hard to find a reason of such behaviour. Most probably the app
returns some error, but it is not logged in and it causes the problem.
Please start with opening Publii from console - maybe some errors will
appear when the app will disappear without interaction.
—
Reply to this email directly, view it on GitHub
<#1925 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAB323F3AHXH5NNHAZRWRLT2I26GXAVCNFSM6AAAAABUNASQE2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNZSG42DSMY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
ooh, had a bad poof, ran it fromthe konsole and the konsole went poof too,
will google how to get thelogs whenI get time (noticed the poof after some
time.... lost quite a bit too, I do my final edit in Publii)
IS there anyone here with experience as to which distro is more
stable running Publii ? I am basically happy to distro jump to support
Publii
On Sat, Jan 4, 2025 at 7:47 AM meika loofs samorzewski ***@***.***>
wrote:
… Ok, I'll check it out. and wait and watch
thank you
On Sat, Jan 4, 2025 at 3:55 AM Tomasz Dziuda ***@***.***>
wrote:
> @meika <https://github.com/meika> - unfortunately without any logs it
> will be very hard to find a reason of such behaviour. Most probably the app
> returns some error, but it is not logged in and it causes the problem.
> Please start with opening Publii from console - maybe some errors will
> appear when the app will disappear without interaction.
>
> —
> Reply to this email directly, view it on GitHub
> <#1925 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AAB323F3AHXH5NNHAZRWRLT2I26GXAVCNFSM6AAAAABUNASQE2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNZSG42DSMY>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi @meika Publii AppImage from https://getpublii.com/download/ running on Linux Mint 21.3 without any problems for like some months. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the tip!
Will give it a go
meika
…On Sat, Jan 4, 2025 at 8:47 PM Carsten Feller ***@***.***> wrote:
Hi @meika <https://github.com/meika> Publii AppImage from
https://getpublii.com/download/ running on Linux Mint 21.3 without any
problems for like some months.
Try to use the Publii.AppImage and avoid .rpm or .deb for most scenarios.
—
Reply to this email directly, view it on GitHub
<#1925 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAB323AZUCSNAJC77FJTWOL2I6U4VAVCNFSM6AAAAABUNASQE2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNZTGIZTKNQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Found a space to take publii out of production...
nothing, looks up fuse, Kubuntu 24.10 has fuse3 where do I go to find out publii.appimge requirements? do I need to install a lower fuse along fuse3? as per will go back to the .deb package despite instability |
Beta Was this translation helpful? Give feedback.
-
|
Just to be clear, you made it executable like desribed here at "how to run an appimage": https://docs.appimage.org/introduction/quickstart.html Did you try other appimages, f.e. from here: https://keepassxc.org/download/#linux ? How do they behave? Never heard of this before... Does Kubuntu handle appimage related stuff different from Ubuntu/ Mint? Try Linux Mint Live from a usb stick, this shoud absolutely work right out of the box... |
Beta Was this translation helpful? Give feedback.
-
|
Thanks I'll give it a go (again)
Yes I made it executable. And I can't imagine it is different at all.
Part of this journey was trialing Mint on USB but it just failed,, the
whole installer quit on me during selection of locales etc, & perhaps due
to the ISP related issues. It then refused to boot from the USB stick, so
I'll try a new one.
As time goes by the deb package seems to be more stable, did manage to get
some updates through eventually.
…On Wed, Jan 15, 2025 at 9:17 PM Carsten Feller ***@***.***> wrote:
Just to be clear, you made it executable like desribed here at "how to run
an appimage": https://docs.appimage.org/introduction/quickstart.html
Did you try other appimages, f.e. from here:
https://keepassxc.org/download/#linux ? How do they behave?
Never heard of this before... Does Kubuntu handle appimage related stuff
different from Ubuntu/ Mint?
Try Linux Mint Live from a usb stick, this shoud absolutely work right out
of the box...
—
Reply to this email directly, view it on GitHub
<#1925 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAB323ESVZE4AWYWSZO4YBL2KYYSBAVCNFSM6AAAAABUNASQE2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCOBUGE2DONY>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I have recently moved to Kubuntu from nixos with KDE, primarily to have a more easily update-able Publii (i am actually thankful for the deb package) (I kept borking the channel update thingo in nixos).
However there is a noticeable stability issue, as in, Publii just goes poof, very regularly, after some period of time, this varies a lot. No hang, no freeze, just poof. It seem to be the only app doing it every time the app is run.
Some tips on what to do when I notice it go poof to capture some data would be grand.
Publii Version: 0.46.3 (build 17008)
Operating System: Kubuntu 24.10
KDE Plasma Version: 6.1.5
KDE Frameworks Version: 6.6.0
Qt Version: 6.6.2
Kernel Version: 6.11.0-13-generic (64-bit)
Graphics Platform: Wayland
Processors: 4 × Intel® Core™ i5-6500T CPU @ 2.50GHz
Memory: 7.6 GiB of RAM
Graphics Processor: Mesa Intel® HD Graphics 530
Manufacturer: HP
Product Name: HP ProDesk 600 G2 DM
Beta Was this translation helpful? Give feedback.
All reactions