qgssymbol.sip.in

/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/symbology/qgssymbol.h                                       *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.py again   *
 ************************************************************************/




typedef QList<QgsSymbolLayer *> QgsSymbolLayerList;

class QgsSymbolAnimationSettings
{
%Docstring(signature="appended")

Contains settings relating to symbol animation.

.. versionadded:: 3.26
%End

%TypeHeaderCode
#include "qgssymbol.h"
%End
  public:

    void setIsAnimated( bool animated );
%Docstring
Sets whether the symbol is animated.

This is a user-facing setting for symbols, which allows users to define whether a
symbol is animated, and allows for creation of animated symbols via data
defined properties.

.. seealso:: :py:func:`isAnimated`
%End

    bool isAnimated() const;
%Docstring
Returns ``True`` if the symbol is animated.

This is a user-facing setting for symbols, which allows users to define whether a
symbol is animated, and allows for creation of animated symbols via data
defined properties.

.. seealso:: :py:func:`setIsAnimated`
%End

    void setFrameRate( double rate );
%Docstring
Sets the symbol animation frame ``rate`` (in frames per second).

.. seealso:: :py:func:`frameRate`
%End

    double frameRate() const;
%Docstring
Returns the symbol animation frame rate (in frames per second).

.. seealso:: :py:func:`setFrameRate`
%End

};


class QgsSymbolBufferSettings
{
%Docstring(signature="appended")

Contains settings relating to symbol buffers, which draw a "halo" effect around the symbol.

.. versionadded:: 3.40
%End

%TypeHeaderCode
#include "qgssymbol.h"
%End
  public:

    QgsSymbolBufferSettings();
    ~QgsSymbolBufferSettings();

    QgsSymbolBufferSettings( const QgsSymbolBufferSettings &other );

    bool enabled() const;
%Docstring
Returns whether the buffer is enabled.

.. seealso:: :py:func:`setEnabled`
%End

    void setEnabled( bool enabled );
%Docstring
Sets whether the symbol buffer will be drawn.

.. seealso:: :py:func:`enabled`
%End

    double size() const;
%Docstring
Returns the size of the buffer.

.. seealso:: :py:func:`sizeUnit`

.. seealso:: :py:func:`setSize`
%End

    void setSize( double size );
%Docstring
Sets the ``size`` of the buffer.

The size units are specified using :py:func:`~QgsSymbolBufferSettings.setSizeUnit`.

.. seealso:: :py:func:`size`

.. seealso:: :py:func:`setSizeUnit`
%End

    Qgis::RenderUnit sizeUnit() const;
%Docstring
Returns the units for the buffer size.

.. seealso:: :py:func:`size`

.. seealso:: :py:func:`setSizeUnit`
%End

    void setSizeUnit( Qgis::RenderUnit unit );
%Docstring
Sets the ``unit`` used for the buffer size.

.. seealso:: :py:func:`setSize`

.. seealso:: :py:func:`sizeUnit`
%End

    QgsMapUnitScale sizeMapUnitScale() const;
%Docstring
Returns the map unit scale object for the buffer size. This is only used if the
buffer size is set to :py:class:`QgsUnitTypes`.RenderMapUnit.

.. seealso:: :py:func:`setSizeMapUnitScale`

.. seealso:: :py:func:`sizeUnit`
%End

    void setSizeMapUnitScale( const QgsMapUnitScale &scale );
%Docstring
Sets the map unit ``scale`` object for the buffer size.

This is only used if the buffer size is set to :py:class:`QgsUnitTypes`.RenderMapUnit.

.. seealso:: :py:func:`sizeMapUnitScale`

.. seealso:: :py:func:`setSizeUnit`
%End

    Qt::PenJoinStyle joinStyle() const;
%Docstring
Returns the buffer join style.

.. seealso:: :py:func:`setJoinStyle`
%End

    void setJoinStyle( Qt::PenJoinStyle style );
%Docstring
Sets the join ``style`` used for drawing the buffer.

.. seealso:: :py:func:`joinStyle`
%End

    QgsFillSymbol *fillSymbol() const;
%Docstring
Returns the fill symbol used to render the buffer.

Ownership is not transferred.

.. seealso:: :py:func:`setFillSymbol`
%End

    void setFillSymbol( QgsFillSymbol *symbol /Transfer/ );
%Docstring
Sets the fill ``symbol`` used to render the buffer. Ownership of ``symbol`` is
transferred to the buffer.

.. seealso:: :py:func:`fillSymbol`
%End


    void writeXml( QDomElement &element, const QgsReadWriteContext &context ) const;
%Docstring
Writes the buffer settings to an XML ``element``.

.. seealso:: :py:func:`readXml`
%End

    void readXml( const QDomElement &element, const QgsReadWriteContext &context );
%Docstring
Reads the buffer settings from an XML ``element``.

.. seealso:: :py:func:`readXml`
%End

};


class QgsSymbol
{
%Docstring(signature="appended")

Abstract base class for all rendered symbols.
%End

%TypeHeaderCode
#include "qgssymbol.h"
%End
%ConvertToSubClassCode
    switch ( sipCpp->type() )
    {
      case Qgis::SymbolType::Marker: sipType = sipType_QgsMarkerSymbol; break;
      case Qgis::SymbolType::Line: sipType = sipType_QgsLineSymbol; break;
      case Qgis::SymbolType::Fill: sipType = sipType_QgsFillSymbol; break;
      default: sipType = 0; break;
    }
%End
  public:

    static QString symbolTypeToString( Qgis::SymbolType type );
%Docstring
Returns a translated string version of the specified symbol ``type``.

.. versionadded:: 3.20
%End

    static Qgis::SymbolType symbolTypeForGeometryType( Qgis::GeometryType type );
%Docstring
Returns the default symbol type required for the specified geometry ``type``.

.. versionadded:: 3.20
%End


    enum class Property
    {
      Opacity,
      ExtentBuffer,
    };

    static const QgsPropertiesDefinition &propertyDefinitions();
%Docstring
Returns the symbol property definitions.

.. versionadded:: 3.18
%End

    virtual ~QgsSymbol();

    static QgsSymbol *defaultSymbol( Qgis::GeometryType geomType ) /Factory/;
%Docstring
Returns a new default symbol for the specified geometry type.

The caller takes ownership of the returned object.
%End

    Qgis::SymbolType type() const;
%Docstring
Returns the symbol's type.
%End


    QgsSymbolLayerList symbolLayers() const;
%Docstring
Returns the list of symbol layers contained in the symbol.

:return: symbol layers list

.. seealso:: :py:func:`symbolLayer`

.. seealso:: :py:func:`symbolLayerCount`
%End


    SIP_PYOBJECT symbolLayer( int layer ) /TypeHint="QgsSymbolLayer"/;
%Docstring
Returns the symbol layer at the specified index.

:raises IndexError: if no layer with the specified index exists.

.. seealso:: :py:func:`symbolLayers`

.. seealso:: :py:func:`symbolLayerCount`
%End
%MethodCode
    const int count = sipCpp->symbolLayerCount();
    if ( a0 < 0 || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else
    {
      sipRes = sipConvertFromType( sipCpp->symbolLayer( a0 ), sipType_QgsSymbolLayer, NULL );
    }
%End

    int symbolLayerCount() const;
%Docstring
Returns the total number of symbol layers contained in the symbol.

:return: count of symbol layers

.. seealso:: :py:func:`symbolLayers`

.. seealso:: :py:func:`symbolLayer`
%End


    int __len__() const;
%Docstring
Returns the number of symbol layers contained in the symbol.
%End
%MethodCode
    sipRes = sipCpp->symbolLayerCount();
%End

    //! Ensures that bool(obj) returns ``True`` (otherwise __len__() would be used)
    int __bool__() const;
%MethodCode
    sipRes = true;
%End

    SIP_PYOBJECT __getitem__( int index ) /TypeHint="QgsSymbolLayer"/;
%Docstring
Returns the symbol layer at the specified ``index``.

Indexes can be less than 0, in which case they correspond to layers from the end of the symbol. E.g. an index of -1
corresponds to the last layer in the symbol.

:raises IndexError: if no layer with the specified ``index`` exists.

.. versionadded:: 3.10
%End
%MethodCode
    const int count = sipCpp->symbolLayerCount();
    if ( a0 < -count || a0 >= count )
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
    else if ( a0 >= 0 )
    {
      return sipConvertFromType( sipCpp->symbolLayer( a0 ), sipType_QgsSymbolLayer, NULL );
    }
    else
    {
      return sipConvertFromType( sipCpp->symbolLayer( count + a0 ), sipType_QgsSymbolLayer, NULL );
    }
%End

    void __delitem__( int index );
%Docstring
Deletes the layer at the specified ``index``.

Indexes can be less than 0, in which case they correspond to layers from the end of the symbol. E.g. an index of -1
corresponds to the last layer in the symbol.

:raises IndexError: if no layer at the specified ``index`` exists

.. versionadded:: 3.10
%End
%MethodCode
    const int count = sipCpp->symbolLayerCount();
    if ( a0 >= 0 && a0 < count )
      sipCpp->deleteSymbolLayer( a0 );
    else if ( a0 < 0 && a0 >= -count )
      sipCpp->deleteSymbolLayer( count + a0 );
    else
    {
      PyErr_SetString( PyExc_IndexError, QByteArray::number( a0 ) );
      sipIsErr = 1;
    }
%End

    bool insertSymbolLayer( int index, QgsSymbolLayer *layer /Transfer/ );
%Docstring
Inserts a symbol ``layer`` to specified ``index``.
Ownership of ``layer`` is transferred to the symbol.

:param index: The index at which the layer should be added
:param layer: The symbol layer to add

:return: ``True`` if the layer is added, ``False`` if the index or the layer is bad
%End

    bool appendSymbolLayer( QgsSymbolLayer *layer /Transfer/ );
%Docstring
Appends a symbol ``layer`` at the end of the current symbol layer list.
Ownership of ``layer`` is transferred to the symbol.

:return: ``True`` if the layer was successfully added, ``False`` if the layer is not compatible with the
         symbol's :py:func:`~QgsSymbol.type`.
%End

    bool deleteSymbolLayer( int index );
%Docstring
Removes and deletes the symbol layer at the specified ``index``.
%End

    QgsSymbolLayer *takeSymbolLayer( int index ) /TransferBack/;
%Docstring
Removes a symbol layer from the list and returns a pointer to it.
Ownership of the layer is handed to the caller.

:param index: The index of the layer to remove

:return: A pointer to the removed layer
%End

    bool changeSymbolLayer( int index, QgsSymbolLayer *layer /Transfer/ );
%Docstring
Deletes the current layer at the specified ``index`` and replaces it with ``layer``.
Ownership of ``layer`` is transferred to the symbol.

Returns ``False`` if ``layer`` is not compatible with the symbol's :py:func:`~QgsSymbol.type`, or
``True`` if the layer was successfully replaced.
%End

    void startRender( QgsRenderContext &context, const QgsFields &fields = QgsFields() );
%Docstring
Begins the rendering process for the symbol. This must be called before :py:func:`~QgsSymbol.renderFeature`,
and should be followed by a call to :py:func:`~QgsSymbol.stopRender`.

:param context: render context which symbol will be drawn using
:param fields: fields for features to be rendered (usually the associated
               vector layer's fields). Required for correct calculation of data defined
               overrides.

.. seealso:: :py:func:`stopRender`
%End

    void stopRender( QgsRenderContext &context );
%Docstring
Ends the rendering process. This should be called after rendering all desired features.

:param context: render context, must match the context specified when :py:func:`~QgsSymbol.startRender`
                was called.

.. seealso:: :py:func:`startRender`
%End

    void setColor( const QColor &color ) const;
%Docstring
Sets the ``color`` for the symbol.

Calling this method sets the color for each individual symbol layer contained
within the symbol to ``color``.

Locked symbol layers are skipped and are left unchanged.

.. seealso:: :py:func:`color`
%End

    QColor color() const;
%Docstring
Returns the symbol's color.

For multi-layer symbols, this method returns the color of the first unlocked symbol
layer.

.. seealso:: :py:func:`setColor`
%End

    void drawPreviewIcon( QPainter *painter, QSize size, QgsRenderContext *customContext = 0, bool selected = false, const QgsExpressionContext *expressionContext = 0,
                          const QgsLegendPatchShape *patchShape = 0, const QgsScreenProperties &screen = QgsScreenProperties() );
%Docstring
Draws an icon of the symbol that occupies an area given by ``size`` using the specified ``painter``.

Optionally a custom render context may be given in order to ensure that the preview icon exactly
matches the settings from that context.

:param painter: destination painter
:param size: size of the icon
:param customContext: the context in which the rendering happens
:param selected: set to ``True`` to render the symbol in a selected state (since QGIS 3.10)
:param expressionContext: optional custom expression context
:param patchShape: optional patch shape to use for symbol preview. If not specified a default shape will be used instead.
:param screen: can be used to specify the destination screen properties for the icon. This allows the icon to be generated using the correct DPI and device pixel ratio for the target screen (since QGIS 3.32)

.. seealso:: :py:func:`exportImage`

.. seealso:: :py:func:`asImage`
%End

    void exportImage( const QString &path, const QString &format, QSize size );
%Docstring
Export the symbol as an image format, to the specified ``path`` and with the given ``size``.

If ``format`` is "SVG" then an SVG file will be created, otherwise a raster image of the
specified format will be created.

.. seealso:: :py:func:`asImage`

.. seealso:: :py:func:`drawPreviewIcon`
%End

    QImage asImage( QSize size, QgsRenderContext *customContext = 0 );
%Docstring
Returns an image of the symbol at the specified ``size``.

Optionally a custom render context may be given in order to ensure that the preview icon exactly
matches the settings from that context.

.. seealso:: :py:func:`exportImage`

.. seealso:: :py:func:`drawPreviewIcon`
%End

    QImage bigSymbolPreviewImage( QgsExpressionContext *expressionContext = 0, Qgis::SymbolPreviewFlags flags = Qgis::SymbolPreviewFlag::FlagIncludeCrosshairsForMarkerSymbols, const QgsScreenProperties &screen = QgsScreenProperties() ) /PyName=bigSymbolPreviewImageV2/;
%Docstring
Returns a large (roughly 100x100 pixel) preview image for the symbol.

:param expressionContext: optional expression context, for evaluation of
                          data defined symbol properties
:param flags: optional flags to control how preview image is generated
:param screen: can be used to specify the destination screen properties for the icon. This allows the icon to be generated using the correct DPI and device pixel ratio for a target screen (since QGIS 3.32)

.. seealso:: :py:func:`asImage`

.. seealso:: :py:func:`drawPreviewIcon`
%End

 QImage bigSymbolPreviewImage( QgsExpressionContext *expressionContext = 0, int flags = static_cast< int >( Qgis::SymbolPreviewFlag::FlagIncludeCrosshairsForMarkerSymbols ) ) /Deprecated/;
%Docstring

.. deprecated:: 3.40

   Use :py:func:`~QgsSymbol.bigSymbolPreviewImageV2` instead.
%End

    QString dump() const;
%Docstring
Returns a string dump of the symbol's properties.
%End

    virtual QgsSymbol *clone() const = 0 /Factory/;
%Docstring
Returns a deep copy of this symbol.

Ownership is transferred to the caller.
%End

    void toSld( QDomDocument &doc, QDomElement &element, QVariantMap props ) const;
%Docstring
Converts the symbol to a SLD representation.
%End

    Qgis::RenderUnit outputUnit() const;
%Docstring
Returns the units to use for sizes and widths within the symbol. Individual
symbol layer definitions will interpret this in different ways, e.g., a marker symbol
may use it to specify the units for the marker size, while a line symbol
may use it to specify the units for the line width.

:return: output unit, or :py:class:`QgsUnitTypes`.RenderUnknownUnit if the symbol contains mixed units

.. seealso:: :py:func:`setOutputUnit`
%End

    bool usesMapUnits() const;
%Docstring
Returns ``True`` if the symbol has any components which use map unit based sizes.

.. versionadded:: 3.18
%End

    void setOutputUnit( Qgis::RenderUnit unit ) const;
%Docstring
Sets the units to use for sizes and widths within the symbol. Individual
symbol definitions will interpret this in different ways, e.g., a marker symbol
may use it to specify the units for the marker size, while a line symbol
may use it to specify the units for the line width.

:param unit: output units

.. seealso:: :py:func:`outputUnit`
%End

    QgsMapUnitScale mapUnitScale() const;
%Docstring
Returns the map unit scale for the symbol.

If the symbol consists of multiple layers, the map unit scale is only
returned if all layers have the same scale settings. If the settings differ,
a default constructed map unit scale is returned.

.. seealso:: :py:func:`setMapUnitScale`
%End

    void setMapUnitScale( const QgsMapUnitScale &scale ) const;
%Docstring
Sets the map unit ``scale`` for the symbol.

Calling this method sets the scale for all symbol layers contained within the
symbol.

.. seealso:: :py:func:`mapUnitScale`
%End

    qreal opacity() const;
%Docstring
Returns the opacity for the symbol.

:return: opacity value between 0 (fully transparent) and 1 (fully opaque)

.. seealso:: :py:func:`setOpacity`
%End

    void setOpacity( qreal opacity );
%Docstring
Sets the ``opacity`` for the symbol.

:param opacity: opacity value between 0 (fully transparent) and 1 (fully opaque)

.. seealso:: :py:func:`opacity`
%End

    void setRenderHints( Qgis::SymbolRenderHints hints );
%Docstring
Sets rendering hint flags for the symbol.

.. seealso:: :py:func:`renderHints`
%End

    Qgis::SymbolRenderHints renderHints() const;
%Docstring
Returns the rendering hint flags for the symbol.

.. seealso:: :py:func:`setRenderHints`
%End

    void setFlags( Qgis::SymbolFlags flags );
%Docstring
Sets ``flags`` for the symbol.

.. seealso:: :py:func:`flags`

.. versionadded:: 3.320
%End

    Qgis::SymbolFlags flags() const;
%Docstring
Returns flags for the symbol.

.. seealso:: :py:func:`setFlags`

.. versionadded:: 3.20
%End

    void setClipFeaturesToExtent( bool clipFeaturesToExtent );
%Docstring
Sets whether features drawn by the symbol should be clipped to the render context's
extent. If this option is enabled then features which are partially outside the extent
will be clipped. This speeds up rendering of the feature, but may have undesirable
side effects for certain symbol types.

:param clipFeaturesToExtent: set to ``True`` to enable clipping (defaults to ``True``)

.. seealso:: :py:func:`clipFeaturesToExtent`
%End

    bool clipFeaturesToExtent() const;
%Docstring
Returns whether features drawn by the symbol will be clipped to the render context's
extent. If this option is enabled then features which are partially outside the extent
will be clipped. This speeds up rendering of the feature, but may have undesirable
side effects for certain symbol types.

:return: ``True`` if features will be clipped

.. seealso:: :py:func:`setClipFeaturesToExtent`
%End

    void setForceRHR( bool force );
%Docstring
Sets whether polygon features drawn by the symbol should be reoriented to follow the
standard right-hand-rule orientation, in which the area that is
bounded by the polygon is to the right of the boundary. In particular, the exterior
ring is oriented in a clockwise direction and the interior rings in a counter-clockwise
direction.

.. seealso:: :py:func:`forceRHR`

.. versionadded:: 3.6
%End

    bool forceRHR() const;
%Docstring
Returns ``True`` if polygon features drawn by the symbol will be reoriented to follow the
standard right-hand-rule orientation, in which the area that is
bounded by the polygon is to the right of the boundary. In particular, the exterior
ring is oriented in a clockwise direction and the interior rings in a counter-clockwise
direction.

.. seealso:: :py:func:`setForceRHR`

.. versionadded:: 3.6
%End

    QgsSymbolBufferSettings *bufferSettings();
%Docstring
Returns the symbol buffer settings, which control an optional "halo" effect around the symbol.

Will be ``None`` if no buffer settings have previously been set for the symbol.

.. seealso:: :py:func:`setBufferSettings`

.. versionadded:: 3.40
%End


    void setBufferSettings( QgsSymbolBufferSettings *settings /Transfer/ );
%Docstring
Sets a the symbol buffer ``settings``, which control an optional "halo" effect around the symbol.

Ownership is transferred to the symbol.

.. seealso:: :py:func:`bufferSettings`

.. versionadded:: 3.40
%End

    QgsSymbolAnimationSettings &animationSettings();
%Docstring
Returns a reference to the symbol animation settings.

.. seealso:: :py:func:`setAnimationSettings`

.. versionadded:: 3.26
%End


    void setAnimationSettings( const QgsSymbolAnimationSettings &settings );
%Docstring
Sets a the symbol animation ``settings``.

.. seealso:: :py:func:`animationSettings`

.. versionadded:: 3.26
%End

    QSet<QString> usedAttributes( const QgsRenderContext &context ) const;
%Docstring
Returns a list of attributes required to render this feature.
This should include any attributes required by the symbology including
the ones required by expressions.
%End

    void setDataDefinedProperty( Property key, const QgsProperty &property );
%Docstring
Sets a data defined property for the symbol. Any existing property with the same key
will be overwritten.

.. seealso:: :py:func:`dataDefinedProperties`

.. seealso:: Property

.. versionadded:: 3.18
%End

    QgsPropertyCollection &dataDefinedProperties();
%Docstring
Returns a reference to the symbol's property collection, used for data defined overrides.

.. seealso:: :py:func:`setDataDefinedProperties`

.. seealso:: Property

.. versionadded:: 3.18
%End


    void setDataDefinedProperties( const QgsPropertyCollection &collection );
%Docstring
Sets the symbol's property collection, used for data defined overrides.

:param collection: property collection. Existing properties will be replaced.

.. seealso:: :py:func:`dataDefinedProperties`

.. versionadded:: 3.18
%End

    bool hasDataDefinedProperties() const;
%Docstring
Returns whether the symbol utilizes any data defined properties.
%End

    bool canCauseArtifactsBetweenAdjacentTiles() const;
%Docstring
Returns ``True`` if the symbol rendering can cause visible artifacts across a single feature
when the feature is rendered as a series of adjacent map tiles each containing a portion of the feature's geometry.

Internally this calls :py:func:`QgsSymbolLayer.canCauseArtifactsBetweenAdjacentTiles()` for all symbol layers in the symbol
and returns ``True`` if any of the layers returned ``True``.

.. versionadded:: 3.18
%End

 void setLayer( const QgsVectorLayer *layer ) /Deprecated/;
%Docstring

.. note::

   the layer will be ``None`` after stopRender

.. deprecated:: 3.40

   Will be removed in QGIS 4.0.
%End

 const QgsVectorLayer *layer() const /Deprecated/;
%Docstring

.. deprecated:: 3.40

   Will be removed in QGIS 4.0.
%End

    void renderFeature( const QgsFeature &feature, QgsRenderContext &context, int layer = -1, bool selected = false, bool drawVertexMarker = false, Qgis::VertexMarkerType currentVertexMarkerType = Qgis::VertexMarkerType::SemiTransparentCircle, double currentVertexMarkerSize = 0.0 ) throw( QgsCsException );
%Docstring
Render a feature. Before calling this the :py:func:`~QgsSymbol.startRender` method should be called to initialize
the rendering process. After rendering all features :py:func:`~QgsSymbol.stopRender` must be called.
%End

    QgsSymbolRenderContext *symbolRenderContext();
%Docstring
Returns the symbol render context. Only valid between startRender and stopRender calls.

:return: The symbol render context
%End

    void startFeatureRender( const QgsFeature &feature, QgsRenderContext &context, int layer = -1 );
%Docstring
Called before symbol layers will be rendered for a particular ``feature``.

This is always followed by a call to :py:func:`~QgsSymbol.stopFeatureRender` after the feature
has been completely rendered (i.e. all parts have been rendered).

Internally, this notifies all symbol layers which will be used via a call to
:py:func:`QgsSymbolLayer.startFeatureRender()`.

.. versionadded:: 3.20
%End

    void stopFeatureRender( const QgsFeature &feature, QgsRenderContext &context, int layer = -1 );
%Docstring
Called after symbol layers have been rendered for a particular ``feature``.

This is always preceded by a call to :py:func:`~QgsSymbol.startFeatureRender` just before the feature
will be rendered.

Internally, this notifies all symbol layers which were used via a call to
:py:func:`QgsSymbolLayer.stopFeatureRender()`.

.. versionadded:: 3.20
%End

    double extentBuffer() const;
%Docstring
Returns the symbol's extent buffer.

Units are retrieved via :py:func:`~QgsSymbol.extentBufferSizeUnit`.

.. versionadded:: 3.42
%End

    void setExtentBuffer( double extentBuffer );
%Docstring
Sets the symbol's extent buffer.

Units are set via :py:func:`~QgsSymbol.setExtentBufferSizeUnit`.

:param extentBuffer: buffer distance.

.. seealso:: :py:func:`extentBuffer`

.. note::

   Negative values are not supported and will be changed to 0.

.. versionadded:: 3.42
%End

    Qgis::RenderUnit extentBufferSizeUnit() const;
%Docstring
Returns the units for the buffer size.

.. seealso:: :py:func:`extentBuffer`

.. seealso:: :py:func:`setExtentBufferSizeUnit`

.. versionadded:: 3.42
%End

    void setExtentBufferSizeUnit( Qgis::RenderUnit unit );
%Docstring
Sets the ``unit`` used for the extent buffer.

.. seealso:: :py:func:`setExtentBuffer`

.. seealso:: :py:func:`extentBufferSizeUnit`

.. versionadded:: 3.42
%End

  protected:

    QgsSymbol( Qgis::SymbolType type, const QgsSymbolLayerList &layers /Transfer/ ); // can't be instantiated

    static QPointF _getPoint( QgsRenderContext &context, const QgsPoint &point );
%Docstring
Creates a point in screen coordinates from a :py:class:`QgsPoint` in map coordinates
%End

    static QPolygonF _getLineString( QgsRenderContext &context, const QgsCurve &curve, bool clipToExtent = true );
%Docstring
Creates a line string in screen coordinates from a :py:class:`QgsCurve` in map coordinates
%End

    static QPolygonF _getPolygonRing( QgsRenderContext &context, const QgsCurve &curve, bool clipToExtent, bool isExteriorRing = false, bool correctRingOrientation = false );
%Docstring
Creates a polygon ring in screen coordinates from a :py:class:`QgsCurve` in map coordinates.

If ``correctRingOrientation`` is ``True`` then the ring will be oriented to match standard ring orientation, e.g.
clockwise for exterior rings and counter-clockwise for interior rings.
%End

    static void _getPolygon( QPolygonF &pts, QVector<QPolygonF> &holes, QgsRenderContext &context, const QgsPolygon &polygon, bool clipToExtent = true, bool correctRingOrientation = false );
%Docstring
Creates a polygon in screen coordinates from a :py:class:`QgsPolygonXYin` map coordinates

If ``correctRingOrientation`` is ``True`` then the ring will be oriented to match standard ring orientation, e.g.
clockwise for exterior rings and counter-clockwise for interior rings.
%End

    QgsSymbolLayerList cloneLayers() const /Factory/;
%Docstring
Retrieve a cloned list of all layers that make up this symbol.
Ownership is transferred to the caller.
%End

    void copyCommonProperties( const QgsSymbol *other );
%Docstring
Copies common properties from an ``other`` symbol to this symbol.

.. versionadded:: 3.40
%End

    void renderUsingLayer( QgsSymbolLayer *layer, QgsSymbolRenderContext &context, Qgis::GeometryType geometryType = Qgis::GeometryType::Unknown, const QPolygonF *points = 0, const QVector<QPolygonF> *rings = 0 );
%Docstring
Renders a context using a particular symbol layer without passing in a
geometry. This is used as fallback, if the symbol being rendered is not
compatible with the specified layer. In such a case, this method can be
called and will call the layer's rendering method anyway but the
geometry passed to the layer will be empty.
This is required for layers that generate their own geometry from other
information in the rendering context.

Since QGIS 3.22, the optional ``geometryType``, ``points`` and ``rings`` arguments can specify the original
geometry type, points and rings in which are being rendered by the parent symbol.
%End

    void renderVertexMarker( QPointF pt, QgsRenderContext &context, Qgis::VertexMarkerType currentVertexMarkerType, double currentVertexMarkerSize );
%Docstring
Render editing vertex marker at specified point
%End









  private:
    QgsSymbol( const QgsSymbol & );
};

/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/symbology/qgssymbol.h                                       *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.py again   *
 ************************************************************************/