chore: reformat a little

Author: timyardley

CODE_OF_CONDUCT.md

@@ -8,19 +8,19 @@ In the interest of fostering an open and welcoming environment, we as contributo
 
 Examples of behavior that contributes to creating a positive environment include:
 
-* Using welcoming and inclusive language
-* Being respectful of differing viewpoints and experiences
-* Gracefully accepting constructive criticism
-* Focusing on what is best for the community
-* Showing empathy towards other community members
+- Using welcoming and inclusive language
+- Being respectful of differing viewpoints and experiences
+- Gracefully accepting constructive criticism
+- Focusing on what is best for the community
+- Showing empathy towards other community members
 
 Examples of unacceptable behavior by participants include:
 
-* The use of sexualized language or imagery and unwelcome sexual attention or advances
-* Trolling, insulting/derogatory comments, and personal or political attacks
-* Public or private harassment
-* Publishing others' private information, such as a physical or electronic address, without explicit permission
-* Other conduct which could reasonably be considered inappropriate in a professional setting
+- The use of sexualized language or imagery and unwelcome sexual attention or advances
+- Trolling, insulting/derogatory comments, and personal or political attacks
+- Public or private harassment
+- Publishing others' private information, such as a physical or electronic address, without explicit permission
+- Other conduct which could reasonably be considered inappropriate in a professional setting
 
 ## Our Responsibilities
 

CONTRIBUTING.md

@@ -1,4 +1,3 @@
-
 # Contributing
 
 Contributing is VERY welcomed. The only way for this resource to be useful is if it is maintained.

LICENSE.md

@@ -4,7 +4,7 @@
 
 | Version | Supported          |
 | ------- | ------------------ |
-| all   | :white_check_mark: |
+| all     | :white_check_mark: |
 
 ## Reporting a Vulnerability
 

SECURITY.md

@@ -12,12 +12,12 @@ If you’re from the ICS security camp, pay attention here. To correctly diagnos
 
 So, why have a lab at all? It’s not cheap to set one up or keep it running.
 
-* Have a place to examine failed parts to determine causes
-* Mock up and test new systems BEFORE installing it in the field for the first time
-* Practice what was taught in training
-* Penetration testing of offline equipment
-* Patch testing for field equipment
-* Demonstrate functionality of new equipment under consideration
+- Have a place to examine failed parts to determine causes
+- Mock up and test new systems BEFORE installing it in the field for the first time
+- Practice what was taught in training
+- Penetration testing of offline equipment
+- Patch testing for field equipment
+- Demonstrate functionality of new equipment under consideration
 
 These are reasons enough for most Operations staff and every ICS consultant firm to have a lab. Not many mangers understand the depth and complexity of the instruments, the managed switches, the servers, the HMI workstations, the power systems, the networks, the wiring, the surge protection systems, the software, the PLC gear, the I/O panels and so forth.
 
@@ -74,6 +74,7 @@ You may also want to check calibrations of RTDs or Thermistors using boiling liq
 So a lab is an interesting place. It’s a significant investment. You may be wondering if it’s worth doing. Well, it is. It all has to do with the care, empowerment, and feeding the needs of Engineers.
 
 Here are few side benefits:
+
 1. Toy Factor for Retention
 2. Recruitment
 3. Publicity
@@ -95,4 +96,3 @@ And finally, given a context like this, managers can determine who is on the bal
 ## Summary
 
 Not all of these features are things you’ll need to do, and not all of them are worth the expense. But the need for a lab is there. A lab isn’t cheap. However, if there is no lab, things will rapidly get a lot more expensive.
-

guides/roblee.md

@@ -4,42 +4,42 @@ Developed as a community asset
 
 ## Starting Hardware
 
-* [Siemens S7-1200](http://w3.siemens.com/mcms/programmable-logic-controller/en/basic-controller/s7-1200/pages/default.aspx) PLCs - Cheap and commonly used. You can buy a "starter kit" that includes TIA Portal (software to configure the PLC). Trial version of the software is also available. Check eBay or refurb vendors for deals.
-* [MicroLogix 1100](http://ab.rockwellautomation.com/Programmable-Controllers/MicroLogix-1100) - Another alternative to the S7-1200 and also available in a starter kit. Again, check eBay or refurb vendors for deals.
+- [Siemens S7-1200](http://w3.siemens.com/mcms/programmable-logic-controller/en/basic-controller/s7-1200/pages/default.aspx) PLCs - Cheap and commonly used. You can buy a "starter kit" that includes TIA Portal (software to configure the PLC). Trial version of the software is also available. Check eBay or refurb vendors for deals.
+- [MicroLogix 1100](http://ab.rockwellautomation.com/Programmable-Controllers/MicroLogix-1100) - Another alternative to the S7-1200 and also available in a starter kit. Again, check eBay or refurb vendors for deals.
 
 ## Basic Lab Setup
 
-* [Modicon Quantum](http://www.schneider-electric.com/en/product-range/538-modicon-quantum/)
-* [Koyo Direct](http://www.automationdirect.com/adc/Overview/Catalog/Programmable_Controllers/DirectLogic_Series_PLCs_(Micro_to_Small,_Brick_-a-_Modular))
-* Any no-name PLC with ModBus
+- [Modicon Quantum](http://www.schneider-electric.com/en/product-range/538-modicon-quantum/)
+- [Koyo Direct](<http://www.automationdirect.com/adc/Overview/Catalog/Programmable_Controllers/DirectLogic_Series_PLCs_(Micro_to_Small,_Brick_-a-_Modular)>)
+- Any no-name PLC with ModBus
 
 ## Supporting Equipment
 
 ### Basic
 
-* Network Tap or Hub for capturing network traffic
-* [Throwing Star LAN Tap](https://greatscottgadgets.com/throwingstar/) - a small, simple passive Ethernet tap for monitoring Ethernet communications, requiring no power for operation.
-* [BusPirate](http://dangerousprototypes.com/docs/Bus_Pirate), or equivalent
-* A few USB-Ethernet dongles
-* VMWare Workstation, or other virtualization software
-* Several Serial Cables, and USB adapters as well if you don't have a 'real' serial port, along with wireable serial connectors from Radio Shack
-* About 50 feet of networking cable with all the tools (you won't be doing just Ethernet stuff, but its good wiring for all kinds of things)
-* [NooElec SDR](http://www.nooelec.com/store/sdr.html) Dongle
-* Basic Switch, 10/100 is fine for automation
-* A Basic Serial to Ethernet converter (Digi, MOXA, and several others have decent products)
-* Basic Multimeter (e.g., [INNOVA 3320](http://www.amazon.com/INNOVA-3320-Auto-Ranging-Digital-Multimeter/dp/B000EVYGZA))
-* A few 120VAC appliance replacement cords. (plug on one end and wire on the other. Lots of this equipment doesn't have standard computer plugs, so having this makes it easy)
-* [Raspberry Pi](https://www.raspberrypi.org/products/) or [BeagleBone Black](https://www.sparkfun.com/products/12857) and Breadboard
-* [A low-cost, DIY data diode for ICS](https://github.com/wavestone-cdt/dyode)
+- Network Tap or Hub for capturing network traffic
+- [Throwing Star LAN Tap](https://greatscottgadgets.com/throwingstar/) - a small, simple passive Ethernet tap for monitoring Ethernet communications, requiring no power for operation.
+- [BusPirate](http://dangerousprototypes.com/docs/Bus_Pirate), or equivalent
+- A few USB-Ethernet dongles
+- VMWare Workstation, or other virtualization software
+- Several Serial Cables, and USB adapters as well if you don't have a 'real' serial port, along with wireable serial connectors from Radio Shack
+- About 50 feet of networking cable with all the tools (you won't be doing just Ethernet stuff, but its good wiring for all kinds of things)
+- [NooElec SDR](http://www.nooelec.com/store/sdr.html) Dongle
+- Basic Switch, 10/100 is fine for automation
+- A Basic Serial to Ethernet converter (Digi, MOXA, and several others have decent products)
+- Basic Multimeter (e.g., [INNOVA 3320](http://www.amazon.com/INNOVA-3320-Auto-Ranging-Digital-Multimeter/dp/B000EVYGZA))
+- A few 120VAC appliance replacement cords. (plug on one end and wire on the other. Lots of this equipment doesn't have standard computer plugs, so having this makes it easy)
+- [Raspberry Pi](https://www.raspberrypi.org/products/) or [BeagleBone Black](https://www.sparkfun.com/products/12857) and Breadboard
+- [A low-cost, DIY data diode for ICS](https://github.com/wavestone-cdt/dyode)
 
 ### Advanced
 
-* Oscilloscope ([RIGOL](http://www.rigolna.com) are decent and cheap.)
-* Universal JTAG Adapter (e.g., [Wiggler](http://www.diygadget.com/universal-jtag-adapter-v2-wiggler-and-xilinx-platform-cable-compatible-debrick-routers-modems-and-more.html), [Flyswatter 2](http://www.tincantools.com/JTAG/Flyswatter2.html), [JTAGulator](http://www.grandideastudio.com/portfolio/jtagulator/)) and supporting software (e.g., [OpenOCD](http://openocd.org)).
-* Logic Analyzer ([Saleae](https://www.saleae.com) are good for normal use, stick with an 8 channel to start)
-* Adjustable Power Supply
-* [YardStickOne](https://greatscottgadgets.com/yardstickone/)/[RFCat](http://int3.cc/products/rfcat)/[HackRF](https://greatscottgadgets.com/hackrf/)
-* Another laptop for bare Linux
-* [IDAPro](https://www.hex-rays.com/products/ida/)
+- Oscilloscope ([RIGOL](http://www.rigolna.com) are decent and cheap.)
+- Universal JTAG Adapter (e.g., [Wiggler](http://www.diygadget.com/universal-jtag-adapter-v2-wiggler-and-xilinx-platform-cable-compatible-debrick-routers-modems-and-more.html), [Flyswatter 2](http://www.tincantools.com/JTAG/Flyswatter2.html), [JTAGulator](http://www.grandideastudio.com/portfolio/jtagulator/)) and supporting software (e.g., [OpenOCD](http://openocd.org)).
+- Logic Analyzer ([Saleae](https://www.saleae.com) are good for normal use, stick with an 8 channel to start)
+- Adjustable Power Supply
+- [YardStickOne](https://greatscottgadgets.com/yardstickone/)/[RFCat](http://int3.cc/products/rfcat)/[HackRF](https://greatscottgadgets.com/hackrf/)
+- Another laptop for bare Linux
+- [IDAPro](https://www.hex-rays.com/products/ida/)
 
 (creative commons license)

guides/scadamagICSLab.md

@@ -6,31 +6,29 @@ Developed as a community asset
 
 This is meant to capture which protocol stack implementation is used in a variety of different ICS equipment vendors.
 
-ICS Vendor | Model | Stack Implementation | Protocols |
------------| ----- | -------------------- | --------- |
-ABB | ... | ... | ... |
-GE | ... | ... | ... |
-Honeywell | ... | ... | ... |
-S&C | ... | ... | ... |
-Schneider Electric | ... | ... | ... |
-SEL | ... | ... | ... |
-Siemens | ... | ... | ... |
-
-
-
-## Processor and OS Information 
+| ICS Vendor         | Model | Stack Implementation | Protocols |
+| ------------------ | ----- | -------------------- | --------- |
+| ABB                | ...   | ...                  | ...       |
+| GE                 | ...   | ...                  | ...       |
+| Honeywell          | ...   | ...                  | ...       |
+| S&C                | ...   | ...                  | ...       |
+| Schneider Electric | ...   | ...                  | ...       |
+| SEL                | ...   | ...                  | ...       |
+| Siemens            | ...   | ...                  | ...       |
+
+## Processor and OS Information
 
 This is meant to capture which CPU architecture and operating system is used in a variety of different ICS equipment vendors.
 
-ICS Vendor | Model | CPU Architecture | Operating System |
------------| ----- | ---------------- | ---------------- |
-ABB | COM600 | x86 | Windows |
-ABB | REF615 | MPC82xx | VxWorks 5.5.X |
-ABB | RTU560 | TI am337x | VxWorks 6.9.X |
-SEL | All Relays | ... | ThreadX |
-SEL | 751 | MCF5445x | ThreadX |
-SEL | RTAC 3505 | ... | Linux |
-SEL | RTAC 3530 | ... | Linux |
-SEL | RTAC 3555 | x86 | Linux |
+| ICS Vendor | Model      | CPU Architecture | Operating System |
+| ---------- | ---------- | ---------------- | ---------------- |
+| ABB        | COM600     | x86              | Windows          |
+| ABB        | REF615     | MPC82xx          | VxWorks 5.5.X    |
+| ABB        | RTU560     | TI am337x        | VxWorks 6.9.X    |
+| SEL        | All Relays | ...              | ThreadX          |
+| SEL        | 751        | MCF5445x         | ThreadX          |
+| SEL        | RTAC 3505  | ...              | Linux            |
+| SEL        | RTAC 3530  | ...              | Linux            |
+| SEL        | RTAC 3555  | x86              | Linux            |
 
 (creative commons license)