Skip to content

README.md

Latest commit

 

History

History
42 lines (31 loc) · 1.96 KB

README.md

File metadata and controls

42 lines (31 loc) · 1.96 KB

MultiPi Raspberry Pi Case and Mounting Bracket

This directory contains 3D model files for printing a protective case for a Raspberry Pi 4 and Camera Module 3, along with a mounting bracket.

These files are designed to be 3D printed. Standard PLA or PETG filament should work well.

Files

  • Case:
    • case/rpi_case_bottom.stl: The bottom part of the Raspberry Pi case.
    • case/rpi_case_front_with_button.stl: The front part of the case, designed to accommodate a button (optional).
    • case/rpi_casefront.stl: Alternative front part of the case (without button cutout).
    • case/camera_bracket_v3.stl: Internal bracket to hold the Camera Module 3 inside the case.
  • Mounting Bracket:
    • mounting_bracket/rpi_mounting_bracket.3mf: A bracket to easily mount the assembled case.

Assembly and Preview

Below are images showing the case components and the assembled unit with the mounting bracket.

Case Animation              Assembled Case with Bracket

Case Animation and Assembled case with Camera Module 3 and mounting bracket


Mounting Bracket CAD      Mounting Bracket CAD Cross Section

CAD views of the mounting bracket

Printing Recommendations

  • Material: PLA, PETG, or similar.
  • Layer Height: 0.2mm recommended for a balance of speed and detail.
  • Supports: May be needed depending on your printer and the orientation of the parts (especially for overhangs on the case parts).
  • Infill: 15-25% should be sufficient.