| title | description | addedAt | pageClass |
|---|---|---|---|
Third Reality 3RSS007Z control via MQTT |
Integrate your Third Reality 3RSS007Z via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. |
2020-03-09 19:04:35 UTC |
device-page |
| Model | 3RSS007Z |
| Vendor | Third Reality |
| Description | Smart light switch |
| Exposes | switch (state), linkquality |
| Picture |  |
To put the device in pairing mode, hold the switch's button for 30 seconds until LED starts blinking fast (2 blinks per second)
If the switch is showing off when it is actually on, hold the button till the LED comes on then release, it will change the switch position while keeping the current state.
The current state of this switch is in the published state under the state property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.