| title | description | addedAt | pageClass |
|---|---|---|---|
TuYa ATMS1601Z control via MQTT |
Integrate your TuYa ATMS1601Z via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. |
2022-06-01 08:08:55 -0700 |
device-page |
| Model | ATMS1601Z |
| Vendor | TuYa |
| Description | Din smart relay (without power monitoring) |
| Exposes | switch (state), power_outage_memory, indicator_mode, linkquality |
| Picture |  |
The current state of this switch is in the published state under the state property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
Recover state after power outage.
Value can be found in the published state on the power_outage_memory property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"power_outage_memory": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_outage_memory": NEW_VALUE}.
The possible values are: on, off, restore.
Relay LED indicator mode.
Value can be found in the published state on the indicator_mode property.
It's not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"indicator_mode": NEW_VALUE}.
The possible values are: off, on_off, off_on.
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.