my_file.txt

openDataServer 5400 10
connect 127.0.0.1 5402
var warp = bind /sim/time/warp
var magnetos = bind /controls/switches/magnetos
var throttle = bind /controls/engines/current-engine/throttle
var mixture = bind /controls/engines/current-engine/mixture
var masterbat = bind /controls/switches/master-bat
var masterlat = bind /controls/switches/master-alt
var masteravionics = bind /controls/switches/master-avionics
var brakeparking = bind /sim/model/c172p/brake-parking
var primer = bind /controls/engines/engine/primer
var starter = bind /controls/switches/starter
var autostart = bind /engines/active-engine/auto-start
var breaks = bind /controls/flight/speedbrake
var heading = bind /instrumentation/heading-indicator/indicated-heading-deg
var airspeed = bind /instrumentation/airspeed-indicator/indicated-speed-kt
var roll = bind /instrumentation/attitude-indicator/indicated-roll-deg
var pitch = bind /instrumentation/attitude-indicator/internal-pitch-deg
var rudder = bind /controls/flight/rudder
var aileron = bind /controls/flight/aileron
var elevator = bind /controls/flight/elevator
var alt = bind /instrumentation/altimeter/indicated-altitude-ft
var rpm = bind /engines/engine/rpm
print "let's start"
sleep 3000
magnetos = 3
throttle = 0.2
mixture = 0.949
masterbat = 1
masterlat = 1
masteravionics = 1
brakeparking = 0
primer = 3
starter = 1
autostart = 1
print "engine is warming..."
print rpm
rpm = 800
print rpm
sleep 12000
print "let's fly"
var h0 = heading
print h0
breaks = 0
while alt < 1500 {
	rudder = ( h0 - heading ) / 36
	throttle = throttle +0.05
	aileron = ( 0 - roll ) / 70
	elevator = pitch / 50
	print alt
	sleep 250
}
print "done"