rust: add io::{Io, IoRaw} base types

I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().

Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.

Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.

`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.

`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.

To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.

Reviewed-by: Alice Ryhl <[email protected]>
Tested-by: Daniel Almeida <[email protected]>
Reviewed-by: Daniel Almeida  <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>

Author: Danilo Krummrich

rust/helpers/helpers.c

@@ -14,6 +14,7 @@
 #include "cred.c"
 #include "err.c"
 #include "fs.c"
+#include "io.c"
 #include "jump_label.c"
 #include "kunit.c"
 #include "mutex.c"

rust/helpers/io.c

@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/io.h>
+
+void __iomem *rust_helper_ioremap(phys_addr_t offset, size_t size)
+{
+	return ioremap(offset, size);
+}
+
+void rust_helper_iounmap(volatile void __iomem *addr)
+{
+	iounmap(addr);
+}
+
+u8 rust_helper_readb(const volatile void __iomem *addr)
+{
+	return readb(addr);
+}
+
+u16 rust_helper_readw(const volatile void __iomem *addr)
+{
+	return readw(addr);
+}
+
+u32 rust_helper_readl(const volatile void __iomem *addr)
+{
+	return readl(addr);
+}
+
+#ifdef CONFIG_64BIT
+u64 rust_helper_readq(const volatile void __iomem *addr)
+{
+	return readq(addr);
+}
+#endif
+
+void rust_helper_writeb(u8 value, volatile void __iomem *addr)
+{
+	writeb(value, addr);
+}
+
+void rust_helper_writew(u16 value, volatile void __iomem *addr)
+{
+	writew(value, addr);
+}
+
+void rust_helper_writel(u32 value, volatile void __iomem *addr)
+{
+	writel(value, addr);
+}
+
+#ifdef CONFIG_64BIT
+void rust_helper_writeq(u64 value, volatile void __iomem *addr)
+{
+	writeq(value, addr);
+}
+#endif
+
+u8 rust_helper_readb_relaxed(const volatile void __iomem *addr)
+{
+	return readb_relaxed(addr);
+}
+
+u16 rust_helper_readw_relaxed(const volatile void __iomem *addr)
+{
+	return readw_relaxed(addr);
+}
+
+u32 rust_helper_readl_relaxed(const volatile void __iomem *addr)
+{
+	return readl_relaxed(addr);
+}
+
+#ifdef CONFIG_64BIT
+u64 rust_helper_readq_relaxed(const volatile void __iomem *addr)
+{
+	return readq_relaxed(addr);
+}
+#endif
+
+void rust_helper_writeb_relaxed(u8 value, volatile void __iomem *addr)
+{
+	writeb_relaxed(value, addr);
+}
+
+void rust_helper_writew_relaxed(u16 value, volatile void __iomem *addr)
+{
+	writew_relaxed(value, addr);
+}
+
+void rust_helper_writel_relaxed(u32 value, volatile void __iomem *addr)
+{
+	writel_relaxed(value, addr);
+}
+
+#ifdef CONFIG_64BIT
+void rust_helper_writeq_relaxed(u64 value, volatile void __iomem *addr)
+{
+	writeq_relaxed(value, addr);
+}
+#endif

rust/kernel/io.rs

@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Memory-mapped IO.
+//!
+//! C header: [`include/asm-generic/io.h`](srctree/include/asm-generic/io.h)
+
+use crate::error::{code::EINVAL, Result};
+use crate::{bindings, build_assert};
+
+/// Raw representation of an MMIO region.
+///
+/// By itself, the existence of an instance of this structure does not provide any guarantees that
+/// the represented MMIO region does exist or is properly mapped.
+///
+/// Instead, the bus specific MMIO implementation must convert this raw representation into an `Io`
+/// instance providing the actual memory accessors. Only by the conversion into an `Io` structure
+/// any guarantees are given.
+pub struct IoRaw<const SIZE: usize = 0> {
+    addr: usize,
+    maxsize: usize,
+}
+
+impl<const SIZE: usize> IoRaw<SIZE> {
+    /// Returns a new `IoRaw` instance on success, an error otherwise.
+    pub fn new(addr: usize, maxsize: usize) -> Result<Self> {
+        if maxsize < SIZE {
+            return Err(EINVAL);
+        }
+
+        Ok(Self { addr, maxsize })
+    }
+
+    /// Returns the base address of the MMIO region.
+    #[inline]
+    pub fn addr(&self) -> usize {
+        self.addr
+    }
+
+    /// Returns the maximum size of the MMIO region.
+    #[inline]
+    pub fn maxsize(&self) -> usize {
+        self.maxsize
+    }
+}
+
+/// IO-mapped memory, starting at the base address @addr and spanning @maxlen bytes.
+///
+/// The creator (usually a subsystem / bus such as PCI) is responsible for creating the
+/// mapping, performing an additional region request etc.
+///
+/// # Invariant
+///
+/// `addr` is the start and `maxsize` the length of valid I/O mapped memory region of size
+/// `maxsize`.
+///
+/// # Examples
+///
+/// ```no_run
+/// # use kernel::{bindings, io::{Io, IoRaw}};
+/// # use core::ops::Deref;
+///
+/// // See also [`pci::Bar`] for a real example.
+/// struct IoMem<const SIZE: usize>(IoRaw<SIZE>);
+///
+/// impl<const SIZE: usize> IoMem<SIZE> {
+///     /// # Safety
+///     ///
+///     /// [`paddr`, `paddr` + `SIZE`) must be a valid MMIO region that is mappable into the CPUs
+///     /// virtual address space.
+///     unsafe fn new(paddr: usize) -> Result<Self>{
+///         // SAFETY: By the safety requirements of this function [`paddr`, `paddr` + `SIZE`) is
+///         // valid for `ioremap`.
+///         let addr = unsafe { bindings::ioremap(paddr as _, SIZE as _) };
+///         if addr.is_null() {
+///             return Err(ENOMEM);
+///         }
+///
+///         Ok(IoMem(IoRaw::new(addr as _, SIZE)?))
+///     }
+/// }
+///
+/// impl<const SIZE: usize> Drop for IoMem<SIZE> {
+///     fn drop(&mut self) {
+///         // SAFETY: `self.0.addr()` is guaranteed to be properly mapped by `Self::new`.
+///         unsafe { bindings::iounmap(self.0.addr() as _); };
+///     }
+/// }
+///
+/// impl<const SIZE: usize> Deref for IoMem<SIZE> {
+///    type Target = Io<SIZE>;
+///
+///    fn deref(&self) -> &Self::Target {
+///         // SAFETY: The memory range stored in `self` has been properly mapped in `Self::new`.
+///         unsafe { Io::from_raw(&self.0) }
+///    }
+/// }
+///
+///# fn no_run() -> Result<(), Error> {
+/// // SAFETY: Invalid usage for example purposes.
+/// let iomem = unsafe { IoMem::<{ core::mem::size_of::<u32>() }>::new(0xBAAAAAAD)? };
+/// iomem.writel(0x42, 0x0);
+/// assert!(iomem.try_writel(0x42, 0x0).is_ok());
+/// assert!(iomem.try_writel(0x42, 0x4).is_err());
+/// # Ok(())
+/// # }
+/// ```
+#[repr(transparent)]
+pub struct Io<const SIZE: usize = 0>(IoRaw<SIZE>);
+
+macro_rules! define_read {
+    ($(#[$attr:meta])* $name:ident, $try_name:ident, $type_name:ty) => {
+        /// Read IO data from a given offset known at compile time.
+        ///
+        /// Bound checks are performed on compile time, hence if the offset is not known at compile
+        /// time, the build will fail.
+        $(#[$attr])*
+        #[inline]
+        pub fn $name(&self, offset: usize) -> $type_name {
+            let addr = self.io_addr_assert::<$type_name>(offset);
+
+            // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+            unsafe { bindings::$name(addr as _) }
+        }
+
+        /// Read IO data from a given offset.
+        ///
+        /// Bound checks are performed on runtime, it fails if the offset (plus the type size) is
+        /// out of bounds.
+        $(#[$attr])*
+        pub fn $try_name(&self, offset: usize) -> Result<$type_name> {
+            let addr = self.io_addr::<$type_name>(offset)?;
+
+            // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+            Ok(unsafe { bindings::$name(addr as _) })
+        }
+    };
+}
+
+macro_rules! define_write {
+    ($(#[$attr:meta])* $name:ident, $try_name:ident, $type_name:ty) => {
+        /// Write IO data from a given offset known at compile time.
+        ///
+        /// Bound checks are performed on compile time, hence if the offset is not known at compile
+        /// time, the build will fail.
+        $(#[$attr])*
+        #[inline]
+        pub fn $name(&self, value: $type_name, offset: usize) {
+            let addr = self.io_addr_assert::<$type_name>(offset);
+
+            // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+            unsafe { bindings::$name(value, addr as _, ) }
+        }
+
+        /// Write IO data from a given offset.
+        ///
+        /// Bound checks are performed on runtime, it fails if the offset (plus the type size) is
+        /// out of bounds.
+        $(#[$attr])*
+        pub fn $try_name(&self, value: $type_name, offset: usize) -> Result {
+            let addr = self.io_addr::<$type_name>(offset)?;
+
+            // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+            unsafe { bindings::$name(value, addr as _) }
+            Ok(())
+        }
+    };
+}
+
+impl<const SIZE: usize> Io<SIZE> {
+    /// Converts an `IoRaw` into an `Io` instance, providing the accessors to the MMIO mapping.
+    ///
+    /// # Safety
+    ///
+    /// Callers must ensure that `addr` is the start of a valid I/O mapped memory region of size
+    /// `maxsize`.
+    pub unsafe fn from_raw(raw: &IoRaw<SIZE>) -> &Self {
+        // SAFETY: `Io` is a transparent wrapper around `IoRaw`.
+        unsafe { &*core::ptr::from_ref(raw).cast() }
+    }
+
+    /// Returns the base address of this mapping.
+    #[inline]
+    pub fn addr(&self) -> usize {
+        self.0.addr()
+    }
+
+    /// Returns the maximum size of this mapping.
+    #[inline]
+    pub fn maxsize(&self) -> usize {
+        self.0.maxsize()
+    }
+
+    #[inline]
+    const fn offset_valid<U>(offset: usize, size: usize) -> bool {
+        let type_size = core::mem::size_of::<U>();
+        if let Some(end) = offset.checked_add(type_size) {
+            end <= size && offset % type_size == 0
+        } else {
+            false
+        }
+    }
+
+    #[inline]
+    fn io_addr<U>(&self, offset: usize) -> Result<usize> {
+        if !Self::offset_valid::<U>(offset, self.maxsize()) {
+            return Err(EINVAL);
+        }
+
+        // Probably no need to check, since the safety requirements of `Self::new` guarantee that
+        // this can't overflow.
+        self.addr().checked_add(offset).ok_or(EINVAL)
+    }
+
+    #[inline]
+    fn io_addr_assert<U>(&self, offset: usize) -> usize {
+        build_assert!(Self::offset_valid::<U>(offset, SIZE));
+
+        self.addr() + offset
+    }
+
+    define_read!(readb, try_readb, u8);
+    define_read!(readw, try_readw, u16);
+    define_read!(readl, try_readl, u32);
+    define_read!(
+        #[cfg(CONFIG_64BIT)]
+        readq,
+        try_readq,
+        u64
+    );
+
+    define_read!(readb_relaxed, try_readb_relaxed, u8);
+    define_read!(readw_relaxed, try_readw_relaxed, u16);
+    define_read!(readl_relaxed, try_readl_relaxed, u32);
+    define_read!(
+        #[cfg(CONFIG_64BIT)]
+        readq_relaxed,
+        try_readq_relaxed,
+        u64
+    );
+
+    define_write!(writeb, try_writeb, u8);
+    define_write!(writew, try_writew, u16);
+    define_write!(writel, try_writel, u32);
+    define_write!(
+        #[cfg(CONFIG_64BIT)]
+        writeq,
+        try_writeq,
+        u64
+    );
+
+    define_write!(writeb_relaxed, try_writeb_relaxed, u8);
+    define_write!(writew_relaxed, try_writew_relaxed, u16);
+    define_write!(writel_relaxed, try_writel_relaxed, u32);
+    define_write!(
+        #[cfg(CONFIG_64BIT)]
+        writeq_relaxed,
+        try_writeq_relaxed,
+        u64
+    );
+}

rust/kernel/lib.rs

@@ -79,6 +79,7 @@ pub mod workqueue;
 
 #[doc(hidden)]
 pub use bindings;
+pub mod io;
 pub use macros;
 pub use uapi;