diff --git a/nucleof072rb/.cproject b/nucleof072rb/.cproject index 1e72a9d5..371bc1d7 100644 --- a/nucleof072rb/.cproject +++ b/nucleof072rb/.cproject @@ -1,8 +1,8 @@ - - + + @@ -14,61 +14,61 @@ - - - - - - + + @@ -92,57 +92,57 @@ - - - - - + + - + - + - \ No newline at end of file diff --git a/nucleof072rb/.mxproject b/nucleof072rb/.mxproject index 662fd90b..cfe622b7 100644 --- a/nucleof072rb/.mxproject +++ b/nucleof072rb/.mxproject @@ -1,29 +1,33 @@ +[PreviousLibFiles] +LibFiles=Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_bus.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_crs.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_system.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_utils.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_usart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_bus.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_crs.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_system.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_utils.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_ll_usart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f072xb.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\spi.c;Core\Src\tim.c;Core\Src\usart.c;Core\Src\stm32f0xx_it.c;Core\Src\stm32f0xx_hal_msp.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;;; +HeaderPath=Drivers\STM32F0xx_HAL_Driver\Inc;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F0xx\Include;Drivers\CMSIS\Include;Core\Inc; +CDefines=USE_HAL_DRIVER;STM32F072xB;USE_HAL_DRIVER;USE_HAL_DRIVER; + [PreviousGenFiles] AdvancedFolderStructure=true -HeaderFileListSize=5 +HeaderFileListSize=7 HeaderFiles#0=..\Core\Inc\gpio.h -HeaderFiles#1=..\Core\Inc\usart.h -HeaderFiles#2=..\Core\Inc\stm32f0xx_it.h -HeaderFiles#3=..\Core\Inc\stm32f0xx_hal_conf.h -HeaderFiles#4=..\Core\Inc\main.h +HeaderFiles#1=..\Core\Inc\spi.h +HeaderFiles#2=..\Core\Inc\tim.h +HeaderFiles#3=..\Core\Inc\usart.h +HeaderFiles#4=..\Core\Inc\stm32f0xx_it.h +HeaderFiles#5=..\Core\Inc\stm32f0xx_hal_conf.h +HeaderFiles#6=..\Core\Inc\main.h HeaderFolderListSize=1 HeaderPath#0=..\Core\Inc HeaderFiles=; -SourceFileListSize=5 +SourceFileListSize=7 SourceFiles#0=..\Core\Src\gpio.c -SourceFiles#1=..\Core\Src\usart.c -SourceFiles#2=..\Core\Src\stm32f0xx_it.c -SourceFiles#3=..\Core\Src\stm32f0xx_hal_msp.c -SourceFiles#4=..\Core\Src\main.c +SourceFiles#1=..\Core\Src\spi.c +SourceFiles#2=..\Core\Src\tim.c +SourceFiles#3=..\Core\Src\usart.c +SourceFiles#4=..\Core\Src\stm32f0xx_it.c +SourceFiles#5=..\Core\Src\stm32f0xx_hal_msp.c +SourceFiles#6=..\Core\Src\main.c SourceFolderListSize=1 SourcePath#0=..\Core\Src SourceFiles=; -[PreviousLibFiles] -LibFiles=Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f072xb.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; - -[PreviousUsedCubeIDEFiles] -SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\usart.c;Core\Src\stm32f0xx_it.c;Core\Src\stm32f0xx_hal_msp.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;;; -HeaderPath=Drivers\STM32F0xx_HAL_Driver\Inc;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F0xx\Include;Drivers\CMSIS\Include;Core\Inc; -CDefines=USE_HAL_DRIVER;STM32F072xB;USE_HAL_DRIVER;USE_HAL_DRIVER; - diff --git a/nucleof072rb/Core/Inc/gpio.h b/nucleof072rb/Core/Inc/gpio.h index 3149c8fc..9ac48571 100644 --- a/nucleof072rb/Core/Inc/gpio.h +++ b/nucleof072rb/Core/Inc/gpio.h @@ -1,3 +1,4 @@ +/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file gpio.h @@ -6,16 +7,16 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2024 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ +/* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __GPIO_H__ #define __GPIO_H__ @@ -46,4 +47,3 @@ void MX_GPIO_Init(void); #endif #endif /*__ GPIO_H__ */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Inc/main.h b/nucleof072rb/Core/Inc/main.h index 6d6ba43b..642ac01e 100644 --- a/nucleof072rb/Core/Inc/main.h +++ b/nucleof072rb/Core/Inc/main.h @@ -7,13 +7,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -70,6 +69,7 @@ void Error_Handler(void); #define TMS_GPIO_Port GPIOA #define TCK_Pin GPIO_PIN_14 #define TCK_GPIO_Port GPIOA + /* USER CODE BEGIN Private defines */ /* USER CODE END Private defines */ @@ -79,5 +79,3 @@ void Error_Handler(void); #endif #endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Inc/spi.h b/nucleof072rb/Core/Inc/spi.h new file mode 100644 index 00000000..bf3fa2df --- /dev/null +++ b/nucleof072rb/Core/Inc/spi.h @@ -0,0 +1,52 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file spi.h + * @brief This file contains all the function prototypes for + * the spi.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __SPI_H__ +#define __SPI_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern SPI_HandleTypeDef hspi1; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_SPI1_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __SPI_H__ */ + diff --git a/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h b/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h index 9ad3d4f0..d5ce22e6 100644 --- a/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h +++ b/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h @@ -1,3 +1,4 @@ +/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file stm32f0xx_hal_conf.h @@ -5,16 +6,16 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ +/* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_CONF_H @@ -47,8 +48,8 @@ /*#define HAL_LPTIM_MODULE_ENABLED */ /*#define HAL_RNG_MODULE_ENABLED */ /*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED /*#define HAL_USART_MODULE_ENABLED */ /*#define HAL_IRDA_MODULE_ENABLED */ @@ -319,4 +320,3 @@ #endif /* __STM32F0xx_HAL_CONF_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Inc/stm32f0xx_it.h b/nucleof072rb/Core/Inc/stm32f0xx_it.h index 41e320ec..1e31ee3c 100644 --- a/nucleof072rb/Core/Inc/stm32f0xx_it.h +++ b/nucleof072rb/Core/Inc/stm32f0xx_it.h @@ -6,15 +6,14 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * - ****************************************************************************** + ****************************************************************************** */ /* USER CODE END Header */ @@ -23,7 +22,7 @@ #define __STM32F0xx_IT_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Private includes ----------------------------------------------------------*/ @@ -61,5 +60,3 @@ void SysTick_Handler(void); #endif #endif /* __STM32F0xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Inc/tim.h b/nucleof072rb/Core/Inc/tim.h new file mode 100644 index 00000000..504bb7d3 --- /dev/null +++ b/nucleof072rb/Core/Inc/tim.h @@ -0,0 +1,54 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tim.h + * @brief This file contains all the function prototypes for + * the tim.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __TIM_H__ +#define __TIM_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern TIM_HandleTypeDef htim1; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_TIM1_Init(void); + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __TIM_H__ */ + diff --git a/nucleof072rb/Core/Inc/usart.h b/nucleof072rb/Core/Inc/usart.h index c6298e1e..cf919335 100644 --- a/nucleof072rb/Core/Inc/usart.h +++ b/nucleof072rb/Core/Inc/usart.h @@ -1,3 +1,4 @@ +/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file usart.h @@ -6,16 +7,16 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2024 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ +/* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __USART_H__ #define __USART_H__ @@ -49,4 +50,3 @@ void MX_USART2_UART_Init(void); #endif /* __USART_H__ */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Src/gpio.c b/nucleof072rb/Core/Src/gpio.c index c0ed0dff..aaefc879 100644 --- a/nucleof072rb/Core/Src/gpio.c +++ b/nucleof072rb/Core/Src/gpio.c @@ -1,3 +1,4 @@ +/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file gpio.c @@ -6,16 +7,16 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2024 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ +/* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "gpio.h" @@ -47,27 +48,36 @@ void MX_GPIO_Init(void) __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET); - /*Configure GPIO pin : PtPin */ + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_RESET); + + /*Configure GPIO pin : B1_Pin */ GPIO_InitStruct.Pin = B1_Pin; GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); - /*Configure GPIO pin : PtPin */ + /*Configure GPIO pin : LD2_Pin */ GPIO_InitStruct.Pin = LD2_Pin; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pin : PB8 */ + GPIO_InitStruct.Pin = GPIO_PIN_8; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + } /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Src/main.c b/nucleof072rb/Core/Src/main.c index c03642f9..a6929460 100644 --- a/nucleof072rb/Core/Src/main.c +++ b/nucleof072rb/Core/Src/main.c @@ -6,24 +6,26 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" +#include "spi.h" +#include "tim.h" #include "usart.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ +#include "stm32f0xx_hal.h" /* USER CODE END Includes */ @@ -34,6 +36,9 @@ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ +#define CS_GPIO_PORT GPIOB +#define CS_PIN GPIO_PIN_8 + /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ @@ -55,7 +60,24 @@ void SystemClock_Config(void); /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ +uint16_t ADC_Read() { + uint8_t tx[3]; + uint8_t rx[3]; + + tx[0] = 0x01; + tx[1] = 0x90; + tx[2] = 0x00; + + HAL_GPIO_WritePin(CS_GPIO_PORT, CS_PIN, GPIO_PIN_RESET); + + HAL_SPI_TransmitReceive(&hspi1, tx, rx, 3, HAL_MAX_DELAY); + HAL_GPIO_WritePin(CS_GPIO_PORT, CS_PIN, GPIO_PIN_SET); + + uint16_t result = ((rx[1] & 0x03) << 8) | rx[2]; + + return result; +} /* USER CODE END 0 */ /** @@ -64,6 +86,7 @@ void SystemClock_Config(void); */ int main(void) { + /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ @@ -87,14 +110,22 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_USART2_UART_Init(); + MX_SPI1_Init(); + MX_TIM1_Init(); /* USER CODE BEGIN 2 */ - + HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_1); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { + uint16_t adc_val = ADC_Read(); + uint16_t PWM_val = 3200 + (adc_val * 3200) / 1023; + + __HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, PWM_val); + + HAL_Delay(10); /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ @@ -122,6 +153,7 @@ void SystemClock_Config(void) { Error_Handler(); } + /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK @@ -160,8 +192,7 @@ void Error_Handler(void) } /* USER CODE END Error_Handler_Debug */ } - -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. @@ -177,5 +208,3 @@ void assert_failed(uint8_t *file, uint32_t line) /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Src/spi.c b/nucleof072rb/Core/Src/spi.c new file mode 100644 index 00000000..3348c5f2 --- /dev/null +++ b/nucleof072rb/Core/Src/spi.c @@ -0,0 +1,131 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file spi.c + * @brief This file provides code for the configuration + * of the SPI instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "spi.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +SPI_HandleTypeDef hspi1; + +/* SPI1 init function */ +void MX_SPI1_Init(void) +{ + + /* USER CODE BEGIN SPI1_Init 0 */ + + /* USER CODE END SPI1_Init 0 */ + + /* USER CODE BEGIN SPI1_Init 1 */ + + /* USER CODE END SPI1_Init 1 */ + hspi1.Instance = SPI1; + hspi1.Init.Mode = SPI_MODE_MASTER; + hspi1.Init.Direction = SPI_DIRECTION_2LINES; + hspi1.Init.DataSize = SPI_DATASIZE_8BIT; + hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; + hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; + hspi1.Init.NSS = SPI_NSS_SOFT; + hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16; + hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi1.Init.TIMode = SPI_TIMODE_DISABLE; + hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi1.Init.CRCPolynomial = 7; + hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE; + hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE; + if (HAL_SPI_Init(&hspi1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI1_Init 2 */ + + /* USER CODE END SPI1_Init 2 */ + +} + +void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(spiHandle->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspInit 0 */ + + /* USER CODE END SPI1_MspInit 0 */ + /* SPI1 clock enable */ + __HAL_RCC_SPI1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**SPI1 GPIO Configuration + PA6 ------> SPI1_MISO + PA7 ------> SPI1_MOSI + PB3 ------> SPI1_SCK + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF0_SPI1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF0_SPI1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI1_MspInit 1 */ + + /* USER CODE END SPI1_MspInit 1 */ + } +} + +void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle) +{ + + if(spiHandle->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspDeInit 0 */ + + /* USER CODE END SPI1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI1_CLK_DISABLE(); + + /**SPI1 GPIO Configuration + PA6 ------> SPI1_MISO + PA7 ------> SPI1_MOSI + PB3 ------> SPI1_SCK + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_7); + + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3); + + /* USER CODE BEGIN SPI1_MspDeInit 1 */ + + /* USER CODE END SPI1_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/nucleof072rb/Core/Src/stm32f0xx_hal_msp.c b/nucleof072rb/Core/Src/stm32f0xx_hal_msp.c index 1d5252de..085205d7 100644 --- a/nucleof072rb/Core/Src/stm32f0xx_hal_msp.c +++ b/nucleof072rb/Core/Src/stm32f0xx_hal_msp.c @@ -7,13 +7,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -63,6 +62,7 @@ */ void HAL_MspInit(void) { + /* USER CODE BEGIN MspInit 0 */ /* USER CODE END MspInit 0 */ @@ -80,5 +80,3 @@ void HAL_MspInit(void) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Src/stm32f0xx_it.c b/nucleof072rb/Core/Src/stm32f0xx_it.c index 87143931..7262d3cc 100644 --- a/nucleof072rb/Core/Src/stm32f0xx_it.c +++ b/nucleof072rb/Core/Src/stm32f0xx_it.c @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -73,7 +72,7 @@ void NMI_Handler(void) /* USER CODE END NonMaskableInt_IRQn 0 */ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - while (1) + while (1) { } /* USER CODE END NonMaskableInt_IRQn 1 */ @@ -144,4 +143,3 @@ void SysTick_Handler(void) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Src/syscalls.c b/nucleof072rb/Core/Src/syscalls.c index bc0dd6c0..8884b5aa 100644 --- a/nucleof072rb/Core/Src/syscalls.c +++ b/nucleof072rb/Core/Src/syscalls.c @@ -10,13 +10,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2020-2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -48,109 +47,130 @@ void initialise_monitor_handles() int _getpid(void) { - return 1; + return 1; } int _kill(int pid, int sig) { - errno = EINVAL; - return -1; + (void)pid; + (void)sig; + errno = EINVAL; + return -1; } void _exit (int status) { - _kill(status, -1); - while (1) {} /* Make sure we hang here */ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ } __attribute__((weak)) int _read(int file, char *ptr, int len) { - int DataIdx; + (void)file; + int DataIdx; - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - *ptr++ = __io_getchar(); - } + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } -return len; + return len; } __attribute__((weak)) int _write(int file, char *ptr, int len) { - int DataIdx; + (void)file; + int DataIdx; - for (DataIdx = 0; DataIdx < len; DataIdx++) - { - __io_putchar(*ptr++); - } - return len; + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; } int _close(int file) { - return -1; + (void)file; + return -1; } int _fstat(int file, struct stat *st) { - st->st_mode = S_IFCHR; - return 0; + (void)file; + st->st_mode = S_IFCHR; + return 0; } int _isatty(int file) { - return 1; + (void)file; + return 1; } int _lseek(int file, int ptr, int dir) { - return 0; + (void)file; + (void)ptr; + (void)dir; + return 0; } int _open(char *path, int flags, ...) { - /* Pretend like we always fail */ - return -1; + (void)path; + (void)flags; + /* Pretend like we always fail */ + return -1; } int _wait(int *status) { - errno = ECHILD; - return -1; + (void)status; + errno = ECHILD; + return -1; } int _unlink(char *name) { - errno = ENOENT; - return -1; + (void)name; + errno = ENOENT; + return -1; } int _times(struct tms *buf) { - return -1; + (void)buf; + return -1; } int _stat(char *file, struct stat *st) { - st->st_mode = S_IFCHR; - return 0; + (void)file; + st->st_mode = S_IFCHR; + return 0; } int _link(char *old, char *new) { - errno = EMLINK; - return -1; + (void)old; + (void)new; + errno = EMLINK; + return -1; } int _fork(void) { - errno = EAGAIN; - return -1; + errno = EAGAIN; + return -1; } int _execve(char *name, char **argv, char **env) { - errno = ENOMEM; - return -1; + (void)name; + (void)argv; + (void)env; + errno = ENOMEM; + return -1; } diff --git a/nucleof072rb/Core/Src/sysmem.c b/nucleof072rb/Core/Src/sysmem.c index d7cc52cd..5d9f7e67 100644 --- a/nucleof072rb/Core/Src/sysmem.c +++ b/nucleof072rb/Core/Src/sysmem.c @@ -10,13 +10,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ diff --git a/nucleof072rb/Core/Src/system_stm32f0xx.c b/nucleof072rb/Core/Src/system_stm32f0xx.c index 4761a854..b634424f 100644 --- a/nucleof072rb/Core/Src/system_stm32f0xx.c +++ b/nucleof072rb/Core/Src/system_stm32f0xx.c @@ -22,17 +22,15 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ - /** @addtogroup CMSIS * @{ */ @@ -156,6 +154,8 @@ void SystemInit(void) * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) * or HSI_VALUE(*) multiplied/divided by the PLL factors. * + * - If SYSCLK source is HSI48, SystemCoreClock will contain the HSI48_VALUE(***) + * * (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value * 8 MHz) but the real value may vary depending on the variations * in voltage and temperature. @@ -165,6 +165,10 @@ void SystemInit(void) * is same as the real frequency of the crystal used. Otherwise, this function * may have wrong result. * + * (***) HSI48_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * * - The result of this function could be not correct when using fractional * value for HSE crystal. * @@ -198,13 +202,13 @@ void SystemCoreClockUpdate (void) /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull; } -#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) { /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull; } -#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */ +#endif /* STM32F042x6 || STM32F048xx || STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */ else { #if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \ @@ -218,7 +222,7 @@ void SystemCoreClockUpdate (void) #endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || STM32F091xC || STM32F098xx || STM32F030xC */ - } + } break; default: /* HSI used as system clock */ SystemCoreClock = HSI_VALUE; @@ -243,5 +247,3 @@ void SystemCoreClockUpdate (void) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/nucleof072rb/Core/Src/tim.c b/nucleof072rb/Core/Src/tim.c new file mode 100644 index 00000000..d0d086e4 --- /dev/null +++ b/nucleof072rb/Core/Src/tim.c @@ -0,0 +1,161 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tim.c + * @brief This file provides code for the configuration + * of the TIM instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "tim.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +TIM_HandleTypeDef htim1; + +/* TIM1 init function */ +void MX_TIM1_Init(void) +{ + + /* USER CODE BEGIN TIM1_Init 0 */ + + /* USER CODE END TIM1_Init 0 */ + + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + TIM_MasterConfigTypeDef sMasterConfig = {0}; + TIM_OC_InitTypeDef sConfigOC = {0}; + TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0}; + + /* USER CODE BEGIN TIM1_Init 1 */ + + /* USER CODE END TIM1_Init 1 */ + htim1.Instance = TIM1; + htim1.Init.Prescaler = 14; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 64000; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) + { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_Init(&htim1) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + sConfigOC.OCMode = TIM_OCMODE_PWM1; + sConfigOC.Pulse = 0; + sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; + sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH; + sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; + sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET; + sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET; + if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK) + { + Error_Handler(); + } + sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE; + sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE; + sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF; + sBreakDeadTimeConfig.DeadTime = 0; + sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE; + sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH; + sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE; + if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM1_Init 2 */ + + /* USER CODE END TIM1_Init 2 */ + HAL_TIM_MspPostInit(&htim1); + +} + +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle) +{ + + if(tim_baseHandle->Instance==TIM1) + { + /* USER CODE BEGIN TIM1_MspInit 0 */ + + /* USER CODE END TIM1_MspInit 0 */ + /* TIM1 clock enable */ + __HAL_RCC_TIM1_CLK_ENABLE(); + /* USER CODE BEGIN TIM1_MspInit 1 */ + + /* USER CODE END TIM1_MspInit 1 */ + } +} +void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(timHandle->Instance==TIM1) + { + /* USER CODE BEGIN TIM1_MspPostInit 0 */ + + /* USER CODE END TIM1_MspPostInit 0 */ + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**TIM1 GPIO Configuration + PA8 ------> TIM1_CH1 + */ + GPIO_InitStruct.Pin = GPIO_PIN_8; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN TIM1_MspPostInit 1 */ + + /* USER CODE END TIM1_MspPostInit 1 */ + } + +} + +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle) +{ + + if(tim_baseHandle->Instance==TIM1) + { + /* USER CODE BEGIN TIM1_MspDeInit 0 */ + + /* USER CODE END TIM1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM1_CLK_DISABLE(); + /* USER CODE BEGIN TIM1_MspDeInit 1 */ + + /* USER CODE END TIM1_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/nucleof072rb/Core/Src/usart.c b/nucleof072rb/Core/Src/usart.c index 5bfe8a4e..01f3f4c6 100644 --- a/nucleof072rb/Core/Src/usart.c +++ b/nucleof072rb/Core/Src/usart.c @@ -1,3 +1,4 @@ +/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file usart.c @@ -6,17 +7,16 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2024 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ - +/* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "usart.h" @@ -114,5 +114,3 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Core/Startup/startup_stm32f072rbtx.s b/nucleof072rb/Core/Startup/startup_stm32f072rbtx.s index ffc1d162..ba7b08ac 100644 --- a/nucleof072rb/Core/Startup/startup_stm32f072rbtx.s +++ b/nucleof072rb/Core/Startup/startup_stm32f072rbtx.s @@ -14,13 +14,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -51,6 +50,9 @@ defined in linker script */ Reset_Handler: ldr r0, =_estack mov sp, r0 /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit /* Copy the data segment initializers from flash to SRAM */ ldr r0, =_sdata @@ -83,8 +85,6 @@ LoopFillZerobss: cmp r2, r4 bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit /* Call static constructors */ bl __libc_init_array /* Call the application's entry point.*/ @@ -290,5 +290,5 @@ g_pfnVectors: .weak USB_IRQHandler .thumb_set USB_IRQHandler,Default_Handler -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f072xb.h b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f072xb.h index 2c02643a..f02789cf 100644 --- a/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f072xb.h +++ b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f072xb.h @@ -2,29 +2,27 @@ ****************************************************************************** * @file stm32f072xb.h * @author MCD Application Team - * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F0xx devices. - * + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * * This file contains: * - Data structures and the address mapping for all peripherals * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral’s registers hardware - * + * - Macros to access peripheral's registers hardware + * ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ - /** @addtogroup CMSIS * @{ */ @@ -32,7 +30,7 @@ /** @addtogroup stm32f072xb * @{ */ - + #ifndef __STM32F072xB_H #define __STM32F072xB_H @@ -50,18 +48,18 @@ #define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ #define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ - + /** * @} */ - + /** @addtogroup Peripheral_interrupt_number_definition * @{ */ /** - * @brief STM32F0xx Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section */ /*!< Interrupt Number Definition */ @@ -70,7 +68,7 @@ typedef enum /****** Cortex-M0 Processor Exceptions Numbers **************************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ - SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ @@ -147,7 +145,7 @@ typedef struct __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ } ADC_Common_TypeDef; -/** +/** * @brief Controller Area Network TxMailBox */ typedef struct @@ -168,7 +166,7 @@ typedef struct __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ }CAN_FIFOMailBox_TypeDef; - + /** * @brief Controller Area Network FilterRegister */ @@ -221,8 +219,8 @@ typedef struct __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ }CEC_TypeDef; -/** - * @brief Comparator +/** + * @brief Comparator */ typedef struct @@ -241,7 +239,7 @@ typedef struct __IO uint32_t CSR; /*!< Kept for legacy purpose. Use structure 'COMP_Common_TypeDef'. */ }COMP1_2_TypeDef; -/** +/** * @brief CRC calculation unit */ @@ -251,16 +249,16 @@ typedef struct __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ uint8_t RESERVED0; /*!< Reserved, 0x05 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ uint32_t RESERVED2; /*!< Reserved, 0x0C */ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ } CRC_TypeDef; -/** +/** * @brief Clock Recovery System */ -typedef struct +typedef struct { __IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ @@ -268,7 +266,7 @@ __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0 __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ }CRS_TypeDef; -/** +/** * @brief Digital to Analog Converter */ @@ -290,7 +288,7 @@ typedef struct __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ } DAC_TypeDef; -/** +/** * @brief Debug MCU */ @@ -302,7 +300,7 @@ typedef struct __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ }DBGMCU_TypeDef; -/** +/** * @brief DMA Controller */ @@ -320,7 +318,7 @@ typedef struct __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ } DMA_TypeDef; -/** +/** * @brief External Interrupt/Event Controller */ @@ -334,7 +332,7 @@ typedef struct __IO uint32_t PR; /*!
© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.
+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ - /** @addtogroup CMSIS * @{ */ @@ -59,8 +57,8 @@ * - IRQ channel definition * - Peripheral memory mapping and physical registers address definition * - Peripheral pointer declaration and driver header file inclusion - * - Product miscellaneous configuration: assert macros… - * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset. + * - Product miscellaneous configuration: assert macros, … + * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family's superset. */ #if !defined (STM32F030x6) && !defined (STM32F030x8) && \ @@ -104,11 +102,11 @@ #endif /* USE_HAL_DRIVER */ /** - * @brief CMSIS Device version number V2.3.6 + * @brief CMSIS Device version number V2.3.7 */ #define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ #define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ -#define __STM32F0_DEVICE_VERSION_SUB2 (0x06) /*!< [15:8] sub2 version */ +#define __STM32F0_DEVICE_VERSION_SUB2 (0x07) /*!< [15:8] sub2 version */ #define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\ |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\ @@ -268,8 +266,4 @@ typedef enum /** * @} */ - - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h index 3b71cfec..b662b64c 100644 --- a/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h +++ b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h @@ -6,17 +6,15 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ - /** @addtogroup CMSIS * @{ */ @@ -101,5 +99,5 @@ extern void SystemCoreClockUpdate(void); /** * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + */ + diff --git a/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/LICENSE.txt b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/LICENSE.txt new file mode 100644 index 00000000..872e82b4 --- /dev/null +++ b/nucleof072rb/Drivers/CMSIS/Device/ST/STM32F0xx/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the Apache-2.0 license shall apply. +You may obtain a copy of the Apache-2.0 at: +https://opensource.org/licenses/Apache-2.0 diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h index 3a1d05e8..eef1d01c 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -7,13 +7,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -38,14 +37,12 @@ extern "C" { #define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF #define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR #define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR -#if defined(STM32U5) +#if defined(STM32H7) || defined(STM32MP1) #define CRYP_DATATYPE_32B CRYP_NO_SWAP #define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP #define CRYP_DATATYPE_8B CRYP_BYTE_SWAP #define CRYP_DATATYPE_1B CRYP_BIT_SWAP -#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF -#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF -#endif /* STM32U5 */ +#endif /* STM32H7 || STM32MP1 */ /** * @} */ @@ -105,6 +102,16 @@ extern "C" { #if defined(STM32H7) #define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT #endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define ADC_CHANNEL_VCORE ADC_CHANNEL_VDDCORE +#endif /* STM32H5 */ /** * @} */ @@ -132,7 +139,8 @@ extern "C" { #define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 #define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 #if defined(STM32L0) -#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM + input 1 for COMP1, LPTIM input 2 for COMP2 */ #endif #define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR #if defined(STM32F373xC) || defined(STM32F378xx) @@ -206,6 +214,11 @@ extern "C" { #endif #endif + +#if defined(STM32U5) +#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG +#endif + /** * @} */ @@ -214,10 +227,25 @@ extern "C" { * @{ */ #define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ /** * @} */ +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32H5) || defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for + inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for + inter STM32 series compatibility */ +#endif /** * @} */ @@ -252,7 +280,20 @@ extern "C" { #define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL #endif -#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32H5) +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM2_OUT DAC_TRIGGER_LPTIM2_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \ + defined(STM32F4) || defined(STM32G4) #define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID #define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID #endif @@ -317,7 +358,8 @@ extern "C" { #define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING -#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) #define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI #endif @@ -394,6 +436,10 @@ extern "C" { #define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT #endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ /** * @} */ @@ -473,7 +519,7 @@ extern "C" { #define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 #define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 #define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 -#if defined(STM32G0) +#if defined(STM32G0) || defined(STM32C0) #define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE #define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH #else @@ -498,7 +544,20 @@ extern "C" { #define OB_USER_nBOOT0 OB_USER_NBOOT0 #define OB_nBOOT0_RESET OB_NBOOT0_RESET #define OB_nBOOT0_SET OB_NBOOT0_SET +#define OB_USER_SRAM134_RST OB_USER_SRAM_RST +#define OB_SRAM134_RST_ERASE OB_SRAM_RST_ERASE +#define OB_SRAM134_RST_NOT_ERASE OB_SRAM_RST_NOT_ERASE #endif /* STM32U5 */ +#if defined(STM32U0) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nBOOT_SEL OB_USER_NBOOT_SEL +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_USER_nBOOT1 OB_USER_NBOOT1 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#endif /* STM32U0 */ /** * @} @@ -542,6 +601,106 @@ extern "C" { #define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD #endif /* STM32G4 */ +#if defined(STM32H5) +#define SYSCFG_IT_FPU_IOC SBS_IT_FPU_IOC +#define SYSCFG_IT_FPU_DZC SBS_IT_FPU_DZC +#define SYSCFG_IT_FPU_UFC SBS_IT_FPU_UFC +#define SYSCFG_IT_FPU_OFC SBS_IT_FPU_OFC +#define SYSCFG_IT_FPU_IDC SBS_IT_FPU_IDC +#define SYSCFG_IT_FPU_IXC SBS_IT_FPU_IXC + +#define SYSCFG_BREAK_FLASH_ECC SBS_BREAK_FLASH_ECC +#define SYSCFG_BREAK_PVD SBS_BREAK_PVD +#define SYSCFG_BREAK_SRAM_ECC SBS_BREAK_SRAM_ECC +#define SYSCFG_BREAK_LOCKUP SBS_BREAK_LOCKUP + +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 VREFBUF_VOLTAGE_SCALE0 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_VOLTAGE_SCALE1 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE2 VREFBUF_VOLTAGE_SCALE2 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE3 VREFBUF_VOLTAGE_SCALE3 + +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE VREFBUF_HIGH_IMPEDANCE_DISABLE +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_HIGH_IMPEDANCE_ENABLE + +#define SYSCFG_FASTMODEPLUS_PB6 SBS_FASTMODEPLUS_PB6 +#define SYSCFG_FASTMODEPLUS_PB7 SBS_FASTMODEPLUS_PB7 +#define SYSCFG_FASTMODEPLUS_PB8 SBS_FASTMODEPLUS_PB8 +#define SYSCFG_FASTMODEPLUS_PB9 SBS_FASTMODEPLUS_PB9 + +#define SYSCFG_ETH_MII SBS_ETH_MII +#define SYSCFG_ETH_RMII SBS_ETH_RMII +#define IS_SYSCFG_ETHERNET_CONFIG IS_SBS_ETHERNET_CONFIG + +#define SYSCFG_MEMORIES_ERASE_FLAG_IPMEE SBS_MEMORIES_ERASE_FLAG_IPMEE +#define SYSCFG_MEMORIES_ERASE_FLAG_MCLR SBS_MEMORIES_ERASE_FLAG_MCLR +#define IS_SYSCFG_MEMORIES_ERASE_FLAG IS_SBS_MEMORIES_ERASE_FLAG + +#define IS_SYSCFG_CODE_CONFIG IS_SBS_CODE_CONFIG + +#define SYSCFG_MPU_NSEC SBS_MPU_NSEC +#define SYSCFG_VTOR_NSEC SBS_VTOR_NSEC +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define SYSCFG_SAU SBS_SAU +#define SYSCFG_MPU_SEC SBS_MPU_SEC +#define SYSCFG_VTOR_AIRCR_SEC SBS_VTOR_AIRCR_SEC +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#else +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#endif /* __ARM_FEATURE_CMSE */ + +#define SYSCFG_CLK SBS_CLK +#define SYSCFG_CLASSB SBS_CLASSB +#define SYSCFG_FPU SBS_FPU +#define SYSCFG_ALL SBS_ALL + +#define SYSCFG_SEC SBS_SEC +#define SYSCFG_NSEC SBS_NSEC + +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE __HAL_SBS_FPU_INTERRUPT_ENABLE +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE __HAL_SBS_FPU_INTERRUPT_DISABLE + +#define __HAL_SYSCFG_BREAK_ECC_LOCK __HAL_SBS_BREAK_ECC_LOCK +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK __HAL_SBS_BREAK_LOCKUP_LOCK +#define __HAL_SYSCFG_BREAK_PVD_LOCK __HAL_SBS_BREAK_PVD_LOCK +#define __HAL_SYSCFG_BREAK_SRAM_ECC_LOCK __HAL_SBS_BREAK_SRAM_ECC_LOCK + +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE __HAL_SBS_FASTMODEPLUS_ENABLE +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE __HAL_SBS_FASTMODEPLUS_DISABLE + +#define __HAL_SYSCFG_GET_MEMORIES_ERASE_STATUS __HAL_SBS_GET_MEMORIES_ERASE_STATUS +#define __HAL_SYSCFG_CLEAR_MEMORIES_ERASE_STATUS __HAL_SBS_CLEAR_MEMORIES_ERASE_STATUS + +#define IS_SYSCFG_FPU_INTERRUPT IS_SBS_FPU_INTERRUPT +#define IS_SYSCFG_BREAK_CONFIG IS_SBS_BREAK_CONFIG +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE IS_VREFBUF_VOLTAGE_SCALE +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE IS_VREFBUF_HIGH_IMPEDANCE +#define IS_SYSCFG_VREFBUF_TRIMMING IS_VREFBUF_TRIMMING +#define IS_SYSCFG_FASTMODEPLUS IS_SBS_FASTMODEPLUS +#define IS_SYSCFG_ITEMS_ATTRIBUTES IS_SBS_ITEMS_ATTRIBUTES +#define IS_SYSCFG_ATTRIBUTES IS_SBS_ATTRIBUTES +#define IS_SYSCFG_LOCK_ITEMS IS_SBS_LOCK_ITEMS + +#define HAL_SYSCFG_VREFBUF_VoltageScalingConfig HAL_VREFBUF_VoltageScalingConfig +#define HAL_SYSCFG_VREFBUF_HighImpedanceConfig HAL_VREFBUF_HighImpedanceConfig +#define HAL_SYSCFG_VREFBUF_TrimmingConfig HAL_VREFBUF_TrimmingConfig +#define HAL_SYSCFG_EnableVREFBUF HAL_EnableVREFBUF +#define HAL_SYSCFG_DisableVREFBUF HAL_DisableVREFBUF + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SBS_EnableIOAnalogSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SBS_DisableIOAnalogSwitchBooster +#define HAL_SYSCFG_ETHInterfaceSelect HAL_SBS_ETHInterfaceSelect + +#define HAL_SYSCFG_Lock HAL_SBS_Lock +#define HAL_SYSCFG_GetLock HAL_SBS_GetLock + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define HAL_SYSCFG_ConfigAttributes HAL_SBS_ConfigAttributes +#define HAL_SYSCFG_GetConfigAttributes HAL_SBS_GetConfigAttributes +#endif /* __ARM_FEATURE_CMSE */ + +#endif /* STM32H5 */ + + /** * @} */ @@ -609,14 +768,16 @@ extern "C" { #define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS #define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS #define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS -#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \ + STM32H757xx */ #endif /* STM32H7 */ #define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 #define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 #define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || \ + defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM #define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH @@ -637,6 +798,42 @@ extern "C" { #endif /* STM32F0 || STM32F3 || STM32F1 */ #define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) || defined(STM32H5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#endif /* STM32U5 || STM32H5 */ +#if defined(STM32U5) +#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP +#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#define GTZC_PERIPH_LTDC GTZC_PERIPH_LTDCUSB +#endif /* STM32U5 */ +#if defined(STM32H5) +#define GTZC_PERIPH_DAC12 GTZC_PERIPH_DAC1 +#define GTZC_PERIPH_ADC12 GTZC_PERIPH_ADC +#define GTZC_PERIPH_USBFS GTZC_PERIPH_USB +#endif /* STM32H5 */ +#if defined(STM32H5) || defined(STM32U5) +#define GTZC_MCPBB_NB_VCTR_REG_MAX GTZC_MPCBB_NB_VCTR_REG_MAX +#define GTZC_MCPBB_NB_LCK_VCTR_REG_MAX GTZC_MPCBB_NB_LCK_VCTR_REG_MAX +#define GTZC_MCPBB_SUPERBLOCK_UNLOCKED GTZC_MPCBB_SUPERBLOCK_UNLOCKED +#define GTZC_MCPBB_SUPERBLOCK_LOCKED GTZC_MPCBB_SUPERBLOCK_LOCKED +#define GTZC_MCPBB_BLOCK_NSEC GTZC_MPCBB_BLOCK_NSEC +#define GTZC_MCPBB_BLOCK_SEC GTZC_MPCBB_BLOCK_SEC +#define GTZC_MCPBB_BLOCK_NPRIV GTZC_MPCBB_BLOCK_NPRIV +#define GTZC_MCPBB_BLOCK_PRIV GTZC_MPCBB_BLOCK_PRIV +#define GTZC_MCPBB_LOCK_OFF GTZC_MPCBB_LOCK_OFF +#define GTZC_MCPBB_LOCK_ON GTZC_MPCBB_LOCK_ON +#endif /* STM32H5 || STM32U5 */ /** * @} */ @@ -817,7 +1014,8 @@ extern "C" { #define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE #define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE #define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE -#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \ + defined(STM32L1) || defined(STM32F7) #define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX #define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX #define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX @@ -874,9 +1072,19 @@ extern "C" { #define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS #define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + #if defined(STM32U5) #define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF #define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U #endif /* STM32U5 */ /** * @} @@ -945,7 +1153,7 @@ extern "C" { #define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 #define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 -#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5) #define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID #define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID #endif @@ -1029,8 +1237,8 @@ extern "C" { #define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT #define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT -#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 #define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 #define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE @@ -1041,15 +1249,42 @@ extern "C" { #define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 #define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 +#if defined(STM32H5) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_BKP_SRAM TAMP_DEVICESECRETS_ERASE_BKPSRAM +#endif /* STM32H5 || STM32H7RS */ + +#if defined(STM32WBA) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_SRAM2 TAMP_DEVICESECRETS_ERASE_SRAM2 +#define TAMP_SECRETDEVICE_ERASE_RHUK TAMP_DEVICESECRETS_ERASE_RHUK +#define TAMP_SECRETDEVICE_ERASE_ICACHE TAMP_DEVICESECRETS_ERASE_ICACHE +#define TAMP_SECRETDEVICE_ERASE_SAES_AES_HASH TAMP_DEVICESECRETS_ERASE_SAES_AES_HASH +#define TAMP_SECRETDEVICE_ERASE_PKA_SRAM TAMP_DEVICESECRETS_ERASE_PKA_SRAM +#define TAMP_SECRETDEVICE_ERASE_ALL TAMP_DEVICESECRETS_ERASE_ALL +#endif /* STM32WBA */ + +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_DISABLE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_ENABLE TAMP_SECRETDEVICE_ERASE_ALL +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +#if defined(STM32F7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 */ + #if defined(STM32H7) #define RTC_TAMPCR_TAMPXE RTC_TAMPER_X #define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ +#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0) #define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 #define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 #define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 -#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL -#endif /* STM32H7 */ +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 || STM32L0 */ /** * @} @@ -1216,6 +1451,10 @@ extern "C" { #define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 #endif +#if defined(STM32U5) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif /** * @} */ @@ -1325,30 +1564,40 @@ extern "C" { #define ETH_MMCRFAECR 0x00000198U #define ETH_MMCRGUFCR 0x000001C4U -#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ -#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ -#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ -#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ -#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ -#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ -#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ -#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to + the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from + MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus + or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status + of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and + transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input + frame for transmission */ #define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ #define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ -#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ -#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control + de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control + activate threshold */ #define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ #if defined(STM32F1) #else #define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ #define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ -#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status + (or time-stamp) */ #endif -#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and + status */ #define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ #define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ #define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ @@ -1356,6 +1605,8 @@ extern "C" { #define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ #define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ +#define ETH_TxPacketConfig ETH_TxPacketConfigTypeDef /* Transmit Packet Configuration structure definition */ + /** * @} */ @@ -1519,7 +1770,8 @@ extern "C" { #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode #define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ - )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \ + HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) #define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) #if defined(STM32L0) @@ -1528,8 +1780,10 @@ extern "C" { #endif #define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) #define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) -#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : \ + HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \ + defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) #define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode #define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode #define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode @@ -1563,16 +1817,21 @@ extern "C" { #define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter #define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ - )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) ((cmd == ENABLE)? \ + HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \ + HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \ + defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \ + defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT #define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT #define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT #define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || + STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \ + defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA #define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA #define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA @@ -1646,10 +1905,111 @@ extern "C" { #define PWR_MODE_EVT PWR_PVD_MODE_NORMAL +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_SRAM6_PAGE1_STOP_RETENTION PWR_SRAM6_PAGE1_STOP +#define PWR_SRAM6_PAGE2_STOP_RETENTION PWR_SRAM6_PAGE2_STOP +#define PWR_SRAM6_PAGE3_STOP_RETENTION PWR_SRAM6_PAGE3_STOP +#define PWR_SRAM6_PAGE4_STOP_RETENTION PWR_SRAM6_PAGE4_STOP +#define PWR_SRAM6_PAGE5_STOP_RETENTION PWR_SRAM6_PAGE5_STOP +#define PWR_SRAM6_PAGE6_STOP_RETENTION PWR_SRAM6_PAGE6_STOP +#define PWR_SRAM6_PAGE7_STOP_RETENTION PWR_SRAM6_PAGE7_STOP +#define PWR_SRAM6_PAGE8_STOP_RETENTION PWR_SRAM6_PAGE8_STOP +#define PWR_SRAM6_FULL_STOP_RETENTION PWR_SRAM6_FULL_STOP + + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP +#define PWR_JPEGRAM_FULL_STOP_RETENTION PWR_JPEGRAM_FULL_STOP + + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN +#define PWR_SRAM6_FULL_RUN_RETENTION PWR_SRAM6_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + /** * @} */ +/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define HAL_RTCEx_SetBoothardwareKey HAL_RTCEx_LockBootHardwareKey +#define HAL_RTCEx_BKUPBlock_Enable HAL_RTCEx_BKUPBlock +#define HAL_RTCEx_BKUPBlock_Disable HAL_RTCEx_BKUPUnblock +#define HAL_RTCEx_Erase_SecretDev_Conf HAL_RTCEx_ConfigEraseDeviceSecrets +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +/** + * @} + */ + /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose * @{ */ @@ -1675,7 +2035,8 @@ extern "C" { #define HAL_TIM_DMAError TIM_DMAError #define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt #define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt -#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \ + defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) #define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro #define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT #define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback @@ -1932,7 +2293,8 @@ extern "C" { #define COMP_STOP __HAL_COMP_DISABLE #define COMP_LOCK __HAL_COMP_LOCK -#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \ + defined(STM32F334x8) || defined(STM32F328xx) #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) @@ -1957,8 +2319,8 @@ extern "C" { #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F302xE) || defined(STM32F302xC) +#endif +#if defined(STM32F302xE) || defined(STM32F302xC) #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ @@ -1991,8 +2353,8 @@ extern "C" { ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#endif +#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ @@ -2049,8 +2411,8 @@ extern "C" { ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F373xC) ||defined(STM32F378xx) +#endif +#if defined(STM32F373xC) ||defined(STM32F378xx) #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) #define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ @@ -2067,7 +2429,7 @@ extern "C" { __HAL_COMP_COMP2_EXTI_GET_FLAG()) #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -# endif +#endif #else #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) @@ -2104,8 +2466,10 @@ extern "C" { /** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose * @{ */ -#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ /** * @} */ @@ -2264,7 +2628,9 @@ extern "C" { #define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine #define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig #define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig -#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) #define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT #define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT #define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE @@ -2273,8 +2639,12 @@ extern "C" { #define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE #define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE #define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) -#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \ + HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \ + } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \ + HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \ + } while(0) #define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention #define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention #define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 @@ -2310,8 +2680,8 @@ extern "C" { #define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ - )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \ + HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) #define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE #define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE @@ -2361,6 +2731,12 @@ extern "C" { #define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET #define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET #define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#if defined(STM32C0) +#define __HAL_RCC_APB1_FORCE_RESET __HAL_RCC_APB1_GRP1_FORCE_RESET +#define __HAL_RCC_APB1_RELEASE_RESET __HAL_RCC_APB1_GRP1_RELEASE_RESET +#define __HAL_RCC_APB2_FORCE_RESET __HAL_RCC_APB1_GRP2_FORCE_RESET +#define __HAL_RCC_APB2_RELEASE_RESET __HAL_RCC_APB1_GRP2_RELEASE_RESET +#endif /* STM32C0 */ #define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE #define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE #define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET @@ -2815,6 +3191,11 @@ extern "C" { #define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED #define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 #endif #define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE @@ -3279,7 +3660,12 @@ extern "C" { #define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 -#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) +#if defined(STM32U0) +#define RCC_SYSCLKSOURCE_STATUS_PLLR RCC_SYSCLKSOURCE_STATUS_PLLCLK +#endif + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \ + defined(STM32WL) || defined(STM32C0) || defined(STM32H7RS) || defined(STM32U0) #define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE #else #define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK @@ -3381,8 +3767,10 @@ extern "C" { #define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE #define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 #define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#if !defined(STM32U0) #define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 #define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 +#endif #define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 #define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 @@ -3392,8 +3780,8 @@ extern "C" { #define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 #define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 #if defined(STM32U5) -#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL -#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL #define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE #define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE #define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE @@ -3404,7 +3792,112 @@ extern "C" { #define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE #define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE #define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT -#endif +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE + +#define RCC_PLLSOURCE_NONE RCC_PLL1_SOURCE_NONE +#define RCC_PLLSOURCE_HSI RCC_PLL1_SOURCE_HSI +#define RCC_PLLSOURCE_CSI RCC_PLL1_SOURCE_CSI +#define RCC_PLLSOURCE_HSE RCC_PLL1_SOURCE_HSE +#define RCC_PLLVCIRANGE_0 RCC_PLL1_VCIRANGE_0 +#define RCC_PLLVCIRANGE_1 RCC_PLL1_VCIRANGE_1 +#define RCC_PLLVCIRANGE_2 RCC_PLL1_VCIRANGE_2 +#define RCC_PLLVCIRANGE_3 RCC_PLL1_VCIRANGE_3 +#define RCC_PLL1VCOWIDE RCC_PLL1_VCORANGE_WIDE +#define RCC_PLL1VCOMEDIUM RCC_PLL1_VCORANGE_MEDIUM + +#define IS_RCC_PLLSOURCE IS_RCC_PLL1_SOURCE +#define IS_RCC_PLLRGE_VALUE IS_RCC_PLL1_VCIRGE_VALUE +#define IS_RCC_PLLVCORGE_VALUE IS_RCC_PLL1_VCORGE_VALUE +#define IS_RCC_PLLCLOCKOUT_VALUE IS_RCC_PLL1_CLOCKOUT_VALUE +#define IS_RCC_PLL_FRACN_VALUE IS_RCC_PLL1_FRACN_VALUE +#define IS_RCC_PLLM_VALUE IS_RCC_PLL1_DIVM_VALUE +#define IS_RCC_PLLN_VALUE IS_RCC_PLL1_MULN_VALUE +#define IS_RCC_PLLP_VALUE IS_RCC_PLL1_DIVP_VALUE +#define IS_RCC_PLLQ_VALUE IS_RCC_PLL1_DIVQ_VALUE +#define IS_RCC_PLLR_VALUE IS_RCC_PLL1_DIVR_VALUE + +#define __HAL_RCC_PLL_ENABLE __HAL_RCC_PLL1_ENABLE +#define __HAL_RCC_PLL_DISABLE __HAL_RCC_PLL1_DISABLE +#define __HAL_RCC_PLL_FRACN_ENABLE __HAL_RCC_PLL1_FRACN_ENABLE +#define __HAL_RCC_PLL_FRACN_DISABLE __HAL_RCC_PLL1_FRACN_DISABLE +#define __HAL_RCC_PLL_CONFIG __HAL_RCC_PLL1_CONFIG +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG __HAL_RCC_PLL1_PLLSOURCE_CONFIG +#define __HAL_RCC_PLL_DIVM_CONFIG __HAL_RCC_PLL1_DIVM_CONFIG +#define __HAL_RCC_PLL_FRACN_CONFIG __HAL_RCC_PLL1_FRACN_CONFIG +#define __HAL_RCC_PLL_VCIRANGE __HAL_RCC_PLL1_VCIRANGE +#define __HAL_RCC_PLL_VCORANGE __HAL_RCC_PLL1_VCORANGE +#define __HAL_RCC_GET_PLL_OSCSOURCE __HAL_RCC_GET_PLL1_OSCSOURCE +#define __HAL_RCC_PLLCLKOUT_ENABLE __HAL_RCC_PLL1_CLKOUT_ENABLE +#define __HAL_RCC_PLLCLKOUT_DISABLE __HAL_RCC_PLL1_CLKOUT_DISABLE +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG __HAL_RCC_GET_PLL1_CLKOUT_CONFIG + +#define __HAL_RCC_PLL2FRACN_ENABLE __HAL_RCC_PLL2_FRACN_ENABLE +#define __HAL_RCC_PLL2FRACN_DISABLE __HAL_RCC_PLL2_FRACN_DISABLE +#define __HAL_RCC_PLL2CLKOUT_ENABLE __HAL_RCC_PLL2_CLKOUT_ENABLE +#define __HAL_RCC_PLL2CLKOUT_DISABLE __HAL_RCC_PLL2_CLKOUT_DISABLE +#define __HAL_RCC_PLL2FRACN_CONFIG __HAL_RCC_PLL2_FRACN_CONFIG +#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG __HAL_RCC_GET_PLL2_CLKOUT_CONFIG + +#define __HAL_RCC_PLL3FRACN_ENABLE __HAL_RCC_PLL3_FRACN_ENABLE +#define __HAL_RCC_PLL3FRACN_DISABLE __HAL_RCC_PLL3_FRACN_DISABLE +#define __HAL_RCC_PLL3CLKOUT_ENABLE __HAL_RCC_PLL3_CLKOUT_ENABLE +#define __HAL_RCC_PLL3CLKOUT_DISABLE __HAL_RCC_PLL3_CLKOUT_DISABLE +#define __HAL_RCC_PLL3FRACN_CONFIG __HAL_RCC_PLL3_FRACN_CONFIG +#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG __HAL_RCC_GET_PLL3_CLKOUT_CONFIG + +#define RCC_PLL2VCIRANGE_0 RCC_PLL2_VCIRANGE_0 +#define RCC_PLL2VCIRANGE_1 RCC_PLL2_VCIRANGE_1 +#define RCC_PLL2VCIRANGE_2 RCC_PLL2_VCIRANGE_2 +#define RCC_PLL2VCIRANGE_3 RCC_PLL2_VCIRANGE_3 + +#define RCC_PLL2VCOWIDE RCC_PLL2_VCORANGE_WIDE +#define RCC_PLL2VCOMEDIUM RCC_PLL2_VCORANGE_MEDIUM + +#define RCC_PLL2SOURCE_NONE RCC_PLL2_SOURCE_NONE +#define RCC_PLL2SOURCE_HSI RCC_PLL2_SOURCE_HSI +#define RCC_PLL2SOURCE_CSI RCC_PLL2_SOURCE_CSI +#define RCC_PLL2SOURCE_HSE RCC_PLL2_SOURCE_HSE + +#define RCC_PLL3VCIRANGE_0 RCC_PLL3_VCIRANGE_0 +#define RCC_PLL3VCIRANGE_1 RCC_PLL3_VCIRANGE_1 +#define RCC_PLL3VCIRANGE_2 RCC_PLL3_VCIRANGE_2 +#define RCC_PLL3VCIRANGE_3 RCC_PLL3_VCIRANGE_3 + +#define RCC_PLL3VCOWIDE RCC_PLL3_VCORANGE_WIDE +#define RCC_PLL3VCOMEDIUM RCC_PLL3_VCORANGE_MEDIUM + +#define RCC_PLL3SOURCE_NONE RCC_PLL3_SOURCE_NONE +#define RCC_PLL3SOURCE_HSI RCC_PLL3_SOURCE_HSI +#define RCC_PLL3SOURCE_CSI RCC_PLL3_SOURCE_CSI +#define RCC_PLL3SOURCE_HSE RCC_PLL3_SOURCE_HSE + + +#endif /* STM32H5 */ + /** * @} */ @@ -3421,7 +3914,10 @@ extern "C" { /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || \ + defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ + defined (STM32WBA) || defined (STM32H5) || \ + defined (STM32C0) || defined (STM32H7RS) || defined (STM32U0) #else #define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG #endif @@ -3456,6 +3952,13 @@ extern "C" { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) #endif /* STM32F1 */ +#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \ + defined (STM32H7) || \ + defined (STM32L0) || defined (STM32L1) || \ + defined (STM32WB) +#define __HAL_RTC_TAMPER_GET_IT __HAL_RTC_TAMPER_GET_FLAG +#endif + #define IS_ALARM IS_RTC_ALARM #define IS_ALARM_MASK IS_RTC_ALARM_MASK #define IS_TAMPER IS_RTC_TAMPER @@ -3474,6 +3977,11 @@ extern "C" { #define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE #define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE +#if defined (STM32H5) +#define __HAL_RCC_RTCAPB_CLK_ENABLE __HAL_RCC_RTC_CLK_ENABLE +#define __HAL_RCC_RTCAPB_CLK_DISABLE __HAL_RCC_RTC_CLK_DISABLE +#endif /* STM32H5 */ + /** * @} */ @@ -3485,7 +3993,7 @@ extern "C" { #define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE #define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS -#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32L1) +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) #define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE #define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE #define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE @@ -3732,6 +4240,9 @@ extern "C" { #define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE #define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 + +#define TIM_OCMODE_ASSYMETRIC_PWM1 TIM_OCMODE_ASYMMETRIC_PWM1 +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_OCMODE_ASYMMETRIC_PWM2 /** * @} */ @@ -3846,5 +4357,4 @@ extern "C" { #endif /* STM32_HAL_LEGACY */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h index 6fe6c640..0e38043e 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h @@ -7,13 +7,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -103,13 +102,13 @@ typedef enum #endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ #if defined(STM32F091xC) || defined(STM32F098xx) -/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection +/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Envelope Selection * @note Applicable on STM32F09x * @{ */ -#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */ -#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */ -#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation envelope source */ /** * @} @@ -582,4 +581,4 @@ void HAL_DBGMCU_DisableDBGStandbyMode(void); #endif /* __STM32F0xx_HAL_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h index d8a42517..1a07f947 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -129,5 +128,4 @@ void HAL_SYSTICK_Callback(void); #endif /* __STM32F0xx_HAL_CORTEX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h index 6c8fe379..55d2b8ab 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h @@ -7,13 +7,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -55,7 +54,9 @@ typedef enum /* Exported macro ------------------------------------------------------------*/ +#if !defined(UNUSED) #define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ #define HAL_MAX_DELAY 0xFFFFFFFFU @@ -175,4 +176,4 @@ typedef enum #endif /* ___STM32F0xx_HAL_DEF */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h index 1304d1d2..5ae68fe4 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -22,7 +21,7 @@ #define __STM32F0xx_HAL_DMA_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -34,106 +33,106 @@ /** @addtogroup DMA * @{ - */ + */ -/* Exported types ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ /** @defgroup DMA_Exported_Types DMA Exported Types * @{ */ -/** - * @brief DMA Configuration Structure definition +/** + * @brief DMA Configuration Structure definition */ typedef struct { - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, from memory to memory or from peripheral to memory. This parameter can be a value of @ref DMA_Data_transfer_direction */ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. This parameter can be a value of @ref DMA_Memory_incremented_mode */ - + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. This parameter can be a value of @ref DMA_Peripheral_data_size */ uint32_t MemDataAlignment; /*!< Specifies the Memory data width. This parameter can be a value of @ref DMA_Memory_data_size */ - + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. This parameter can be a value of @ref DMA_mode @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ + data transfer is configured on the selected Channel */ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. This parameter can be a value of @ref DMA_Priority_level */ } DMA_InitTypeDef; /** - * @brief HAL DMA State structures definition + * @brief HAL DMA State structures definition */ typedef enum { - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ -}HAL_DMA_StateTypeDef; + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; -/** - * @brief HAL DMA Error Code structure definition - */ +/** + * @brief HAL DMA Error Code structure definition + */ typedef enum { HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; +} HAL_DMA_LevelCompleteTypeDef; -/** +/** * @brief HAL DMA Callback ID structure definition */ typedef enum { HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ - -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ typedef struct __DMA_HandleTypeDef -{ +{ DMA_Channel_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ - + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + __IO uint32_t ErrorCode; /*!< DMA Error code */ - + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ - + uint32_t ChannelIndex; /*!< DMA Channel Index */ -} DMA_HandleTypeDef; +} DMA_HandleTypeDef; /** * @} @@ -147,19 +146,19 @@ typedef struct __DMA_HandleTypeDef /** @defgroup DMA_Error_Code DMA Error Code * @{ - */ + */ #define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ #define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ #define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */ #define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ -#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ /** * @} */ /** @defgroup DMA_Data_transfer_direction DMA Data transfer direction * @{ - */ + */ #define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ #define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ #define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */ @@ -167,19 +166,19 @@ typedef struct __DMA_HandleTypeDef /** * @} */ - + /** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode * @{ - */ + */ #define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ #define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */ /** * @} - */ + */ /** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode * @{ - */ + */ #define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ #define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */ /** @@ -188,16 +187,16 @@ typedef struct __DMA_HandleTypeDef /** @defgroup DMA_Peripheral_data_size DMA Peripheral data size * @{ - */ + */ #define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */ #define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */ #define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */ /** * @} - */ + */ /** @defgroup DMA_Memory_data_size DMA Memory data size - * @{ + * @{ */ #define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */ #define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */ @@ -208,7 +207,7 @@ typedef struct __DMA_HandleTypeDef /** @defgroup DMA_mode DMA mode * @{ - */ + */ #define DMA_NORMAL (0x00000000U) /*!< Normal Mode */ #define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */ /** @@ -224,7 +223,7 @@ typedef struct __DMA_HandleTypeDef #define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ /** * @} - */ + */ /** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions @@ -239,7 +238,7 @@ typedef struct __DMA_HandleTypeDef /** @defgroup DMA_flag_definitions DMA flag definitions * @{ - */ + */ #define DMA_FLAG_GL1 (0x00000001U) /*!< Channel 1 global interrupt flag */ #define DMA_FLAG_TC1 (0x00000002U) /*!< Channel 1 transfer complete flag */ @@ -278,15 +277,15 @@ typedef struct __DMA_HandleTypeDef /** @defgroup HAL_DMA_remapping HAL DMA remapping * Elements values convention: 0xYYYYYYYY * - YYYYYYYY : Position in the SYSCFG register CFGR1 - * @{ + * @{ */ -#define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap +#define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap 0: No remap (ADC DMA requests mapped on DMA channel 1 1: Remap (ADC DMA requests mapped on DMA channel 2 */ -#define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap +#define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap 0: No remap (USART1_TX DMA request mapped on DMA channel 2 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */ -#define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap +#define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap 0: No remap (USART1_RX DMA request mapped on DMA channel 3 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */ #define DMA_REMAP_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap @@ -297,7 +296,7 @@ typedef struct __DMA_HandleTypeDef 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */ #if defined (STM32F070xB) #define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only. - 0: Disabled, need to remap before use + 0: Disabled, need to remap before use 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ #endif @@ -372,7 +371,7 @@ typedef struct __DMA_HandleTypeDef /** * @brief Enables the specified DMA Channel interrupts. * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. * This parameter can be any combination of the following values: * @arg DMA_IT_TC: Transfer complete interrupt mask * @arg DMA_IT_HT: Half transfer complete interrupt mask @@ -384,7 +383,7 @@ typedef struct __DMA_HandleTypeDef /** * @brief Disables the specified DMA Channel interrupts. * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. * This parameter can be any combination of the following values: * @arg DMA_IT_TC: Transfer complete interrupt mask * @arg DMA_IT_HT: Half transfer complete interrupt mask @@ -408,7 +407,7 @@ typedef struct __DMA_HandleTypeDef /** * @brief Returns the number of remaining data units in the current DMAy Channelx transfer. * @param __HANDLE__ DMA handle - * + * * @retval The number of remaining data units in the current DMA Channel transfer. */ #define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) @@ -430,7 +429,7 @@ typedef struct __DMA_HandleTypeDef */ /* Include DMA HAL Extension module */ -#include "stm32f0xx_hal_dma_ex.h" +#include "stm32f0xx_hal_dma_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup DMA_Exported_Functions @@ -442,7 +441,7 @@ typedef struct __DMA_HandleTypeDef */ /* Initialization and de-initialization functions *****************************/ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); /** * @} */ @@ -451,13 +450,13 @@ HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); * @{ */ /* Input and Output operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); /** @@ -472,18 +471,18 @@ HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); /** * @} - */ + */ /** * @} - */ + */ /** @addtogroup DMA_Private_Macros * @{ */ #define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) #define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ ((STATE) == DMA_PINC_DISABLE)) @@ -503,7 +502,7 @@ uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); #define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) #define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) #if defined(SYSCFG_CFGR1_DMA_RMP) @@ -538,12 +537,12 @@ uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) #endif -#endif /* SYSCFG_CFGR1_DMA_RMP */ +#endif /* SYSCFG_CFGR1_DMA_RMP */ /** * @} - */ + */ /** * @} @@ -559,5 +558,4 @@ uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); #endif /* __STM32F0xx_HAL_DMA_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h index 1eaf3965..2bdba299 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -22,7 +21,7 @@ #define __STM32F0xx_HAL_DMA_EX_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -37,230 +36,230 @@ * @{ */ -/* Exported types ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ #if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) /** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants * @{ - */ -#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ + */ +#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remapping on STM32F09x/30xC */ #if !defined(STM32F030xC) -#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ -#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remapping on STM32F09x/30xC */ +#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remapping on STM32F09x/30xC */ #endif /* !defined(STM32F030xC) */ /****************** DMA1 remap bit field definition********************/ /* DMA1 - Channel 1 */ -#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/ +#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/ #define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */ -#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ -#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ #endif /* !defined(STM32F030xC) */ /* DMA1 - Channel 2 */ -#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */ -#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */ +#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */ #define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */ #define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */ -#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ -#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ #endif /* !defined(STM32F030xC) */ /* DMA1 - Channel 3 */ -#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */ +#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */ +#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */ #endif /* !defined(STM32F030xC) */ -#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */ #define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */ #if !defined(STM32F030xC) #define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */ #endif /* !defined(STM32F030xC) */ #define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */ -#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ -#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ #endif /* !defined(STM32F030xC) */ /* DMA1 - Channel 4 */ -#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */ +#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */ #if !defined(STM32F030xC) #define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */ #endif /* !defined(STM32F030xC) */ -#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */ #if !defined(STM32F030xC) #define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */ #endif /* !defined(STM32F030xC) */ #define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */ -#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ #define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */ -#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ -#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ #endif /* !defined(STM32F030xC) */ /* DMA1 - Channel 5 */ -#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */ #define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ #if !defined(STM32F030xC) -#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ -#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ #endif /* !defined(STM32F030xC) */ #if !defined(STM32F030xC) /* DMA1 - Channel 6 */ -#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */ #define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */ #define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */ #define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */ #define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */ -#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ #define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */ -#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ -#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ /* DMA1 - Channel 7 */ -#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ -#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */ #define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */ #define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */ #define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */ -#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ -#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ #define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */ /****************** DMA2 remap bit field definition********************/ /* DMA2 - Channel 1 */ -#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ -#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ -#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ /* DMA2 - Channel 2 */ -#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ -#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ -#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ /* DMA2 - Channel 3 */ -#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ -#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */ +#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */ #define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */ -#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ -#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ /* DMA2 - Channel 4 */ -#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ -#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */ +#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */ #define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */ -#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ -#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ /* DMA2 - Channel 5 */ -#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ -#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ -#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ #endif /* !defined(STM32F030xC) */ -#if defined(STM32F091xC) || defined(STM32F098xx) +#if defined(STM32F091xC) || defined(STM32F098xx) #define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\ @@ -492,7 +491,7 @@ /** * @} - */ + */ #endif /* STM32F091xC || STM32F098xx || STM32F030xC */ /* Exported macros -----------------------------------------------------------*/ @@ -507,7 +506,7 @@ * @brief Returns the current DMA Channel transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified transfer complete flag index. - */ + */ #define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ @@ -521,7 +520,7 @@ * @brief Returns the current DMA Channel half transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified half transfer complete flag index. - */ + */ #define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ @@ -567,7 +566,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 to select the DMA Channel flag. + * Where x can be 1_7 to select the DMA Channel flag. * @retval The state of FLAG (SET or RESET). */ @@ -581,7 +580,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 to select the DMA Channel flag. + * Where x can be 1_7 to select the DMA Channel flag. * @retval None */ #define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) @@ -591,7 +590,7 @@ * @brief Returns the current DMA Channel transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified transfer complete flag index. - */ + */ #define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ @@ -610,7 +609,7 @@ * @brief Returns the current DMA Channel half transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified half transfer complete flag index. - */ + */ #define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ @@ -671,7 +670,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. * @retval The state of FLAG (SET or RESET). */ @@ -687,7 +686,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. * @retval None */ #define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ @@ -699,7 +698,7 @@ * @brief Returns the current DMA Channel transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified transfer complete flag index. - */ + */ #define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ @@ -711,7 +710,7 @@ * @brief Returns the current DMA Channel half transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified half transfer complete flag index. - */ + */ #define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ @@ -751,7 +750,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_5 to select the DMA Channel flag. + * Where x can be 1_5 to select the DMA Channel flag. * @retval The state of FLAG (SET or RESET). */ @@ -765,7 +764,7 @@ * @arg DMA_FLAG_TCx: Transfer complete flag * @arg DMA_FLAG_HTx: Half transfer complete flag * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_5 to select the DMA Channel flag. + * Where x can be 1_5 to select the DMA Channel flag. * @retval None */ #define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) @@ -796,7 +795,7 @@ /** * @} - */ + */ /** * @} @@ -808,4 +807,3 @@ #endif /* __STM32F0xx_HAL_DMA_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h index 4e0248e6..dcfcb7d4 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -372,4 +371,3 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); #endif /* STM32F0xx_HAL_EXTI_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h index 03020371..88d4d916 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h @@ -6,14 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -349,5 +347,4 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); #endif /* __STM32F0xx_HAL_FLASH_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h index ddd5ea38..62531f33 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h @@ -6,14 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -444,5 +442,4 @@ uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress); #endif /* __STM32F0xx_HAL_FLASH_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h index 55872a14..378aec57 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -237,8 +236,8 @@ typedef enum */ #define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ - ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) +#define IS_GPIO_PIN(__PIN__) (((((uint32_t)(__PIN__)) & GPIO_PIN_MASK) != 0x00U) &&\ + ((((uint32_t)(__PIN__)) & ~GPIO_PIN_MASK) == 0x00U)) #define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ @@ -319,4 +318,3 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); #endif /* __STM32F0xx_HAL_GPIO_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h index 3a6d604c..f87eaa6e 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -502,7 +501,7 @@ #define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ #define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ #define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ -#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */ #define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ #define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */ @@ -516,8 +515,8 @@ #define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ #define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ #define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ -#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ -#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */ #define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ #define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ @@ -586,7 +585,7 @@ #define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ #define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ #define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ -#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ #define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ /* AF 2 */ @@ -796,5 +795,3 @@ #endif /* __STM32F0xx_HAL_GPIO_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h index 3c913d0a..bf178555 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -119,8 +118,6 @@ typedef enum HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception process is ongoing */ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ } HAL_I2C_StateTypeDef; @@ -208,6 +205,7 @@ typedef struct __I2C_HandleTypeDef DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + HAL_LockTypeDef Lock; /*!< I2C locking object */ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ @@ -218,6 +216,10 @@ typedef struct __I2C_HandleTypeDef __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + #if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ @@ -706,9 +708,9 @@ void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); * @{ */ /* Peripheral State, Mode and Error functions *********************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); /** * @} @@ -801,8 +803,8 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ (~I2C_CR2_RD_WRN)) : \ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ - (I2C_CR2_ADD10) | (I2C_CR2_START)) & \ - (~I2C_CR2_RD_WRN))) + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) #define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) @@ -834,5 +836,3 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); #endif /* STM32F0xx_HAL_I2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h index f61046a5..121a1ca7 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -189,5 +188,3 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); #endif #endif /* STM32F0xx_HAL_I2C_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h index bab59978..9843d658 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -184,6 +183,3 @@ void HAL_PWR_DisableSEVOnPend(void); #endif /* __STM32F0xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h index 4fbac5c0..9acbd44b 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -454,6 +453,3 @@ void HAL_PWREx_DisableVddio2Monitor(void); #endif #endif /* __STM32F0xx_HAL_PWR_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h index acd386c4..fd3a8d9a 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h @@ -6,14 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -103,7 +101,7 @@ #define RCC_CR_PLLRDY_BitNumber 25 /* Flags in the CR2 register */ #define RCC_CR2_HSI14RDY_BitNumber 1 -#define RCC_CR2_HSI48RDY_BitNumber 16 +#define RCC_CR2_HSI48RDY_BitNumber 17 /* Flags in the BDCR register */ #define RCC_BDCR_LSERDY_BitNumber 1 /* Flags in the CSR register */ @@ -1682,5 +1680,4 @@ void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, #endif /* __STM32F0xx_HAL_RCC_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h index cd83fd1e..c185717c 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h @@ -6,14 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -2082,4 +2080,3 @@ void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); #endif /* __STM32F0xx_HAL_RCC_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h new file mode 100644 index 00000000..a1ba5a84 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h @@ -0,0 +1,851 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_SPI_H +#define STM32F0xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32f0xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_SPI_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h new file mode 100644 index 00000000..bfec36fc --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h @@ -0,0 +1,73 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_SPI_EX_H +#define STM32F0xx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_SPI_EX_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h index f5fe9058..24390439 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -386,29 +385,28 @@ typedef struct */ typedef enum { - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ @@ -707,6 +705,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @} */ +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + /** @defgroup TIM_Flag_definition TIM Flag Definition * @{ */ @@ -741,16 +748,16 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /** @defgroup TIM_Clock_Source TIM Clock Source * @{ */ -#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ #define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ #define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ #define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ #define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ #define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ /** * @} */ @@ -1528,6 +1535,17 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ }while(0) +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + /** * @} */ @@ -1637,20 +1655,24 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to #define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ ((__CHANNEL__) == TIM_CHANNEL_2)) +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \ + (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \ + ((__PERIOD__) > 0U)) + #define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ ((__CHANNEL__) == TIM_CHANNEL_2) || \ ((__CHANNEL__) == TIM_CHANNEL_3)) #define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) #define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ @@ -1688,7 +1710,6 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to #define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) - #define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ ((__STATE__) == TIM_BREAK_DISABLE)) @@ -1726,13 +1747,13 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ ((__SELECTION__) == TIM_TS_ETRF)) #define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ @@ -1879,7 +1900,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); /* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); /** * @} @@ -1901,7 +1922,8 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} @@ -1923,7 +1945,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} @@ -1975,7 +1998,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out * @{ */ /* Timer Encoder functions ****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); @@ -2008,21 +2031,26 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); * @{ */ /* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, @@ -2032,7 +2060,7 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint3 uint32_t BurstLength, uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} */ @@ -2069,17 +2097,17 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca * @{ */ /* Peripheral State functions ************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); /* Peripheral Channel state functions ************************************************/ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); /** * @} */ @@ -2093,9 +2121,9 @@ HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); /** @defgroup TIM_Private_Functions TIM Private Functions * @{ */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); @@ -2127,5 +2155,3 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim); #endif #endif /* STM32F0xx_HAL_TIM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h index e3098b2b..909a68e3 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -117,7 +116,7 @@ typedef struct * @{ */ /* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); @@ -150,7 +149,8 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chann HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} @@ -169,7 +169,8 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); /* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); /** * @} @@ -203,9 +204,9 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32 HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig); + const TIM_MasterConfigTypeDef *sMasterConfig); HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); /** * @} @@ -228,8 +229,8 @@ void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); * @{ */ /* Extended Peripheral State functions ***************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); /** * @} */ @@ -240,7 +241,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, /* End of exported functions -------------------------------------------------*/ /* Private functions----------------------------------------------------------*/ -/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions * @{ */ void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); @@ -264,5 +265,3 @@ void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); #endif /* STM32F0xx_HAL_TIM_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h index cc1ea051..deedb8a3 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -186,7 +185,7 @@ typedef enum /** * @brief HAL UART Reception type definition * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. - * It is expected to admit following values : + * This parameter can be a value of @ref UART_Reception_Type_Values : * HAL_UART_RECEPTION_STANDARD = 0x00U, * HAL_UART_RECEPTION_TOIDLE = 0x01U, * HAL_UART_RECEPTION_TORTO = 0x02U, @@ -194,6 +193,17 @@ typedef enum */ typedef uint32_t HAL_UART_RxTypeTypeDef; +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + /** * @brief UART handle Structure definition */ @@ -205,7 +215,7 @@ typedef struct __UART_HandleTypeDef UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ - uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ uint16_t TxXferSize; /*!< UART Tx Transfer size */ @@ -221,6 +231,8 @@ typedef struct __UART_HandleTypeDef __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ @@ -497,7 +509,9 @@ typedef void (*pUART_RxEventCallbackTypeDef) #define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ #define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ #define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#if defined(USART_RQR_TXFRQ) #define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +#endif /* USART_RQR_TXFRQ */ /** * @} */ @@ -780,7 +794,7 @@ typedef void (*pUART_RxEventCallbackTypeDef) * @} */ -/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values +/** @defgroup UART_Reception_Type_Values UART Reception type values * @{ */ #define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ @@ -791,6 +805,16 @@ typedef void (*pUART_RxEventCallbackTypeDef) * @} */ +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + /** * @} */ @@ -822,11 +846,18 @@ typedef void (*pUART_RxEventCallbackTypeDef) * @param __HANDLE__ specifies the UART Handle. * @retval None */ +#if defined(USART_RQR_TXFRQ) #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ do{ \ SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ } while(0U) +#else +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + } while(0U) +#endif /* USART_RQR_TXFRQ */ /** @brief Clear the specified UART pending flag. * @param __HANDLE__ specifies the UART Handle. @@ -1061,7 +1092,9 @@ typedef void (*pUART_RxEventCallbackTypeDef) * @arg @ref UART_SENDBREAK_REQUEST Send Break Request * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request +#if defined(USART_RQR_TXFRQ) * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request +#endif * @retval None */ #define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) @@ -1350,11 +1383,18 @@ typedef void (*pUART_RxEventCallbackTypeDef) * @param __PARAM__ UART request parameter. * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) */ +#if defined(USART_RQR_TXFRQ) #define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) +#else +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST)) +#endif /* USART_RQR_TXFRQ */ /** * @brief Ensure that UART advanced features initialization is valid. @@ -1525,11 +1565,11 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); */ /* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); @@ -1585,8 +1625,8 @@ HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); */ /* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); /** * @} @@ -1630,4 +1670,3 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa #endif /* STM32F0xx_HAL_UART_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h index f2e3b2a2..08e9b3d8 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -137,7 +136,7 @@ HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huar HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); -#endif/* USART_CR1_UESM */ +#endif /* USART_CR1_UESM */ HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); @@ -146,6 +145,8 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + /** * @} @@ -169,8 +170,8 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ #if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -186,15 +187,16 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ - } while(0) -#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + } \ + } while(0) +#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) \ + || defined (STM32F051x8) || defined (STM32F058xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -210,7 +212,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART2) \ { \ @@ -220,14 +222,14 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ { \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ } \ - } while(0) + } while(0) #elif defined(STM32F070xB) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -243,7 +245,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART2) \ { \ @@ -261,14 +263,14 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ { \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ } \ - } while(0) + } while(0) #elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -284,12 +286,12 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART2) \ { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ case RCC_USART2CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -305,7 +307,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART3) \ { \ @@ -319,14 +321,14 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ { \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ } \ - } while(0) + } while(0) #elif defined(STM32F091xC) || defined (STM32F098xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -342,12 +344,12 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART2) \ { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ case RCC_USART2CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -363,12 +365,12 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART3) \ { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ case RCC_USART3CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -384,7 +386,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART4) \ { \ @@ -412,12 +414,12 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ } \ } while(0) #elif defined(STM32F030xC) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -433,7 +435,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == USART2) \ { \ @@ -460,7 +462,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ } \ } while(0) - + #endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ /** @brief Report the UART mask to apply to retrieve the received data @@ -589,4 +591,3 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ #endif /* STM32F0xx_HAL_UART_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h new file mode 100644 index 00000000..d58df30a --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h @@ -0,0 +1,842 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_BUS_H +#define __STM32F0xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#if defined(DMA2) +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN +#endif /*DMA2*/ +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN +#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN +#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN +#if defined(GPIOD) +#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN +#endif /*GPIOD*/ +#if defined(GPIOE) +#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN +#endif /*GPIOE*/ +#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN +#if defined(TSC) +#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN +#endif /*TSC*/ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#if defined(TIM2) +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN +#endif /*TIM2*/ +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN +#if defined(TIM6) +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN +#endif /*TIM6*/ +#if defined(TIM7) +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN +#endif /*TIM7*/ +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN +#if defined(SPI2) +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN +#endif /*SPI2*/ +#if defined(USART2) +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN +#endif /* USART2 */ +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN +#endif /* USART3 */ +#if defined(USART4) +#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN +#endif /* USART4 */ +#if defined(USART5) +#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN +#endif /* USART5 */ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN +#if defined(I2C2) +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN +#endif /*I2C2*/ +#if defined(USB) +#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN +#endif /* USB */ +#if defined(CAN) +#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN +#endif /*CAN*/ +#if defined(CRS) +#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN +#endif /*CRS*/ +#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN +#if defined(DAC) +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN +#endif /*DAC*/ +#if defined(CEC) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN +#endif /*CEC*/ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH + * @{ + */ +#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN +#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN +#if defined(USART8) +#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN +#endif /*USART8*/ +#if defined(USART7) +#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN +#endif /*USART7*/ +#if defined(USART6) +#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN +#endif /*USART6*/ +#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN +#if defined(TIM15) +#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#endif /*TIM15*/ +#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n + * AHBENR TSCEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHBENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n + * AHBENR TSCEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock (available in register 1). + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n + * APB1ENR CANEN LL_APB1_GRP1_EnableClock\n + * APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n + * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n + * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n + * APB1ENR CECEN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not (available in register 1). + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB1 peripherals clock (available in register 1). + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n + * APB1ENR CANEN LL_APB1_GRP1_DisableClock\n + * APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n + * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n + * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n + * APB1ENR CECEN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset (available in register 1). + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset (available in register 1). + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock (available in register 2). + * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n + * APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n + * APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n + * APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n + * APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n + * APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n + * APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n + * APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n + * APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n + * APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n + * APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n + * APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG + * @arg @ref LL_APB1_GRP2_PERIPH_ADC1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM1 + * @arg @ref LL_APB1_GRP2_PERIPH_SPI1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART1 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM16 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM17 + * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not (available in register 2). + * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n + * APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG + * @arg @ref LL_APB1_GRP2_PERIPH_ADC1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM1 + * @arg @ref LL_APB1_GRP2_PERIPH_SPI1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART1 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM16 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM17 + * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB1 peripherals clock (available in register 2). + * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n + * APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n + * APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n + * APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n + * APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n + * APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n + * APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n + * APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n + * APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n + * APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n + * APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n + * APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG + * @arg @ref LL_APB1_GRP2_PERIPH_ADC1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM1 + * @arg @ref LL_APB1_GRP2_PERIPH_SPI1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART1 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM16 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM17 + * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset (available in register 2). + * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n + * APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n + * APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_ALL + * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG + * @arg @ref LL_APB1_GRP2_PERIPH_ADC1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM1 + * @arg @ref LL_APB1_GRP2_PERIPH_SPI1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART1 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM16 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM17 + * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset (available in register 2). + * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n + * APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_ALL + * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG + * @arg @ref LL_APB1_GRP2_PERIPH_ADC1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM1 + * @arg @ref LL_APB1_GRP2_PERIPH_SPI1 + * @arg @ref LL_APB1_GRP2_PERIPH_USART1 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM16 + * @arg @ref LL_APB1_GRP2_PERIPH_TIM17 + * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_BUS_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h new file mode 100644 index 00000000..e91ea134 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h @@ -0,0 +1,318 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) API to access to MCU info (CPUID register) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_CORTEX_H +#define __STM32F0xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Architecture number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture + * @retval Value should be equal to 0xC for Cortex-M0 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC20 for Cortex-M0 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_CORTEX_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h new file mode 100644 index 00000000..32c92325 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h @@ -0,0 +1,780 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_CRS_H +#define __STM32F0xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU) + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U) + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 32, which corresponds to the middle of the trimming interval. + * The trimming step is around 67 kHz between two consecutive TRIM steps. + * A higher TRIM value corresponds to a higher output frequency + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 63 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 63 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_CRS_H */ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h new file mode 100644 index 00000000..619b6d3a --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h @@ -0,0 +1,2234 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_DMA_H +#define __STM32F0xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), +#if defined(DMA1_Channel6) + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), +#endif /*DMA1_Channel6*/ +#if defined(DMA1_Channel7) + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE) +#endif /*DMA1_Channel7*/ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Constants DMA Private Constants + * @{ + */ +/* Define used to get CSELR register offset */ +#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE) + +/* Defines used for the bit position in the register and perform offsets */ +#define DMA_POSITION_CSELR_CXS ((Channel-1U)*4U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ +#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMA_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ +#endif + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */ +#if defined(DMA1_Channel6) +#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */ +#endif +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) +/** @defgroup DMA_LL_EC_REQUEST Transfer peripheral request + * @{ + */ +#define LL_DMA_REQUEST_0 0x00000000U /*!< DMA peripheral request 0 */ +#define LL_DMA_REQUEST_1 0x00000001U /*!< DMA peripheral request 1 */ +#define LL_DMA_REQUEST_2 0x00000002U /*!< DMA peripheral request 2 */ +#define LL_DMA_REQUEST_3 0x00000003U /*!< DMA peripheral request 3 */ +#define LL_DMA_REQUEST_4 0x00000004U /*!< DMA peripheral request 4 */ +#define LL_DMA_REQUEST_5 0x00000005U /*!< DMA peripheral request 5 */ +#define LL_DMA_REQUEST_6 0x00000006U /*!< DMA peripheral request 6 */ +#define LL_DMA_REQUEST_7 0x00000007U /*!< DMA peripheral request 7 */ +#define LL_DMA_REQUEST_8 0x00000008U /*!< DMA peripheral request 8 */ +#define LL_DMA_REQUEST_9 0x00000009U /*!< DMA peripheral request 9 */ +#define LL_DMA_REQUEST_10 0x0000000AU /*!< DMA peripheral request 10 */ +#define LL_DMA_REQUEST_11 0x0000000BU /*!< DMA peripheral request 11 */ +#define LL_DMA_REQUEST_12 0x0000000CU /*!< DMA peripheral request 12 */ +#define LL_DMA_REQUEST_13 0x0000000DU /*!< DMA peripheral request 13 */ +#define LL_DMA_REQUEST_14 0x0000000EU /*!< DMA peripheral request 14 */ +#define LL_DMA_REQUEST_15 0x0000000FU /*!< DMA peripheral request 15 */ +/** + * @} + */ +#endif + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif +#else +#if defined (DMA1_Channel6) && defined (DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#elif defined (DMA1_Channel6) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + LL_DMA_CHANNEL_6) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + LL_DMA_CHANNEL_5) +#endif /* DMA1_Channel6 && DMA1_Channel7 */ +#endif + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \ + DMA2_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif +#else +#if defined (DMA1_Channel6) && defined (DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#elif defined (DMA1_Channel6) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + DMA1_Channel6) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + DMA1_Channel5) +#endif /* DMA1_Channel6 && DMA1_Channel7 */ +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each IP using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR)); +} + +#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) +/** + * @brief Set DMA request for DMA instance on Channel x. + * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection. + * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n + * CSELR C2S LL_DMA_SetPeriphRequest\n + * CSELR C3S LL_DMA_SetPeriphRequest\n + * CSELR C4S LL_DMA_SetPeriphRequest\n + * CSELR C5S LL_DMA_SetPeriphRequest\n + * CSELR C6S LL_DMA_SetPeriphRequest\n + * CSELR C7S LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphRequest This parameter can be one of the following values: + * @arg @ref LL_DMA_REQUEST_0 + * @arg @ref LL_DMA_REQUEST_1 + * @arg @ref LL_DMA_REQUEST_2 + * @arg @ref LL_DMA_REQUEST_3 + * @arg @ref LL_DMA_REQUEST_4 + * @arg @ref LL_DMA_REQUEST_5 + * @arg @ref LL_DMA_REQUEST_6 + * @arg @ref LL_DMA_REQUEST_7 + * @arg @ref LL_DMA_REQUEST_8 + * @arg @ref LL_DMA_REQUEST_9 + * @arg @ref LL_DMA_REQUEST_10 + * @arg @ref LL_DMA_REQUEST_11 + * @arg @ref LL_DMA_REQUEST_12 + * @arg @ref LL_DMA_REQUEST_13 + * @arg @ref LL_DMA_REQUEST_14 + * @arg @ref LL_DMA_REQUEST_15 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest) +{ + MODIFY_REG(DMAx->CSELR, + DMA_CSELR_C1S << ((Channel - 1U) * 4U), PeriphRequest << DMA_POSITION_CSELR_CXS); +} + +/** + * @brief Get DMA request for DMA instance on Channel x. + * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n + * CSELR C2S LL_DMA_GetPeriphRequest\n + * CSELR C3S LL_DMA_GetPeriphRequest\n + * CSELR C4S LL_DMA_GetPeriphRequest\n + * CSELR C5S LL_DMA_GetPeriphRequest\n + * CSELR C6S LL_DMA_GetPeriphRequest\n + * CSELR C7S LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_REQUEST_0 + * @arg @ref LL_DMA_REQUEST_1 + * @arg @ref LL_DMA_REQUEST_2 + * @arg @ref LL_DMA_REQUEST_3 + * @arg @ref LL_DMA_REQUEST_4 + * @arg @ref LL_DMA_REQUEST_5 + * @arg @ref LL_DMA_REQUEST_6 + * @arg @ref LL_DMA_REQUEST_7 + * @arg @ref LL_DMA_REQUEST_8 + * @arg @ref LL_DMA_REQUEST_9 + * @arg @ref LL_DMA_REQUEST_10 + * @arg @ref LL_DMA_REQUEST_11 + * @arg @ref LL_DMA_REQUEST_12 + * @arg @ref LL_DMA_REQUEST_13 + * @arg @ref LL_DMA_REQUEST_14 + * @arg @ref LL_DMA_REQUEST_15 + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(DMAx->CSELR, + DMA_CSELR_C1S << ((Channel - 1U) * 4U)) >> DMA_POSITION_CSELR_CXS); +} +#endif + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)); +} +#endif + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)); +} +#endif + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)); +} +#endif + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)); +} +#endif + +/** + * @brief Clear Channel 1 global interrupt flag. + * @note Do not Clear Channel 1 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1, + LL_DMA_ClearFlag_TE1. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @note Do not Clear Channel 2 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2, + LL_DMA_ClearFlag_TE2. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @note Do not Clear Channel 3 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3, + LL_DMA_ClearFlag_TE3. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @note Do not Clear Channel 4 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4, + LL_DMA_ClearFlag_TE4. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @note Do not Clear Channel 5 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5, + LL_DMA_ClearFlag_TE5. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 global interrupt flag. + * @note Do not Clear Channel 6 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6, + LL_DMA_ClearFlag_TE6. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 global interrupt flag. + * @note Do not Clear Channel 7 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7, + LL_DMA_ClearFlag_TE7. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} +#endif + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} +#endif + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} +#endif + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} +#endif + +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} +#endif + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_DMA_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h new file mode 100644 index 00000000..c992cac1 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h @@ -0,0 +1,1014 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_EXTI_H +#define __STM32F0xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ +#endif +#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ +#if defined(EXTI_IMR_IM18) +#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ +#endif +#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ +#endif +#if defined(EXTI_IMR_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ +#endif +#if defined(EXTI_IMR_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ +#endif +#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ +#if defined(EXTI_IMR_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ +#endif +#if defined(EXTI_IMR_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ +#endif +#if defined(EXTI_IMR_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ +#endif +#if defined(EXTI_IMR_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ +#endif +#if defined(EXTI_IMR_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ +#endif +#if defined(EXTI_IMR_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ +#endif +#if defined(EXTI_IMR_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ +#endif +#if defined(EXTI_IMR_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ +#endif +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); + +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER, ExtiLine); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); +} + + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR, ExtiLine); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_EXTI_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h new file mode 100644 index 00000000..986db520 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h @@ -0,0 +1,938 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_GPIO_H +#define __STM32F0xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ + GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ + GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ + GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ + GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ + GPIO_BSRR_BS_15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEEDR0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEEDR0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_HIGH + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_GPIO_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h new file mode 100644 index 00000000..0416b9c1 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h @@ -0,0 +1,549 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_PWR_H +#define __STM32F0xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ +#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ +#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ +#if defined(PWR_PVD_SUPPORT) +#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ +#endif /* PWR_PVD_SUPPORT */ +#if defined(PWR_CSR_VREFINTRDYF) +#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */ +#endif /* PWR_CSR_VREFINTRDYF */ +#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ +#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ +#if defined(PWR_CSR_EWUP3) +#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ +#endif /* PWR_CSR_EWUP3 */ +#if defined(PWR_CSR_EWUP4) +#define LL_PWR_CSR_EWUP4 PWR_CSR_EWUP4 /*!< Enable WKUP pin 4 */ +#endif /* PWR_CSR_EWUP4 */ +#if defined(PWR_CSR_EWUP5) +#define LL_PWR_CSR_EWUP5 PWR_CSR_EWUP5 /*!< Enable WKUP pin 5 */ +#endif /* PWR_CSR_EWUP5 */ +#if defined(PWR_CSR_EWUP6) +#define LL_PWR_CSR_EWUP6 PWR_CSR_EWUP6 /*!< Enable WKUP pin 6 */ +#endif /* PWR_CSR_EWUP6 */ +#if defined(PWR_CSR_EWUP7) +#define LL_PWR_CSR_EWUP7 PWR_CSR_EWUP7 /*!< Enable WKUP pin 7 */ +#endif /* PWR_CSR_EWUP7 */ +#if defined(PWR_CSR_EWUP8) +#define LL_PWR_CSR_EWUP8 PWR_CSR_EWUP8 /*!< Enable WKUP pin 8 */ +#endif /* PWR_CSR_EWUP8 */ +/** + * @} + */ + + +/** @defgroup PWR_LL_EC_MODE_PWR Mode Power + * @{ + */ +#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ +#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ +#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ +/** + * @} + */ + +#if defined(PWR_CR_LPDS) +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ +/** + * @} + */ +#endif /* PWR_CR_LPDS */ + +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold 0 */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold 1 */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold 2 */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold 3 */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold 4 */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold 5 */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold 6 */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold 7 */ +/** + * @} + */ +#endif /* PWR_PVD_SUPPORT */ +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ +#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */ +#if defined(PWR_CSR_EWUP3) +#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */ +#endif /* PWR_CSR_EWUP3 */ +#if defined(PWR_CSR_EWUP4) +#define LL_PWR_WAKEUP_PIN4 (PWR_CSR_EWUP4) /*!< WKUP pin 4 : PA2 */ +#endif /* PWR_CSR_EWUP4 */ +#if defined(PWR_CSR_EWUP5) +#define LL_PWR_WAKEUP_PIN5 (PWR_CSR_EWUP5) /*!< WKUP pin 5 : PC5 */ +#endif /* PWR_CSR_EWUP5 */ +#if defined(PWR_CSR_EWUP6) +#define LL_PWR_WAKEUP_PIN6 (PWR_CSR_EWUP6) /*!< WKUP pin 6 : PB5 */ +#endif /* PWR_CSR_EWUP6 */ +#if defined(PWR_CSR_EWUP7) +#define LL_PWR_WAKEUP_PIN7 (PWR_CSR_EWUP7) /*!< WKUP pin 7 : PB15 */ +#endif /* PWR_CSR_EWUP7 */ +#if defined(PWR_CSR_EWUP8) +#define LL_PWR_WAKEUP_PIN8 (PWR_CSR_EWUP8) /*!< WKUP pin 8 : PF2 */ +#endif /* PWR_CSR_EWUP8 */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable access to the backup domain + * @rmtoll CR DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); +} + +#if defined(PWR_CR_LPDS) +/** + * @brief Set voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); +} + +/** + * @brief Get voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); +} +#endif /* PWR_CR_LPDS */ + +/** + * @brief Set Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_SetPowerMode\n + * @rmtoll CR LPDS LL_PWR_SetPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); +} + +/** + * @brief Get Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_GetPowerMode\n + * @rmtoll CR LPDS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); +} + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); +} +#endif /* PWR_PVD_SUPPORT */ + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP4 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP5 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP6 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP7 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP8 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 (*) + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 (*) + * @arg @ref LL_PWR_WAKEUP_PIN7 (*) + * @arg @ref LL_PWR_WAKEUP_PIN8 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP4 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP5 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP6 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP7 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP8 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 (*) + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 (*) + * @arg @ref LL_PWR_WAKEUP_PIN7 (*) + * @arg @ref LL_PWR_WAKEUP_PIN8 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP4 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP5 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP6 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP7 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP8 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 (*) + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 (*) + * @arg @ref LL_PWR_WAKEUP_PIN7 (*) + * @arg @ref LL_PWR_WAKEUP_PIN8 (*) + * + * (*) not available on all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); +} + + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Wake-up Flag + * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); +} + +/** + * @brief Get Standby Flag + * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); +} + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); +} +#endif /* PWR_PVD_SUPPORT */ + +#if defined(PWR_CSR_VREFINTRDYF) +/** + * @brief Get Internal Reference VrefInt Flag + * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF)); +} +#endif /* PWR_CSR_VREFINTRDYF */ +/** + * @brief Clear Standby Flag + * @rmtoll CR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + SET_BIT(PWR->CR, PWR_CR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll CR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + SET_BIT(PWR->CR, PWR_CR_CWUF); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_PWR_H */ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h new file mode 100644 index 00000000..cdcfaf8c --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h @@ -0,0 +1,2258 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_RCC_H +#define __STM32F0xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Constants RCC Private Constants + * @{ + */ +/* Defines used for the bit position in the register and perform offsets*/ +#define RCC_POSITION_HPRE (uint32_t)4U /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_PPRE1 (uint32_t)8U /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_PLLMUL (uint32_t)18U /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_HSICAL (uint32_t)8U /*!< field position in register RCC_CR */ +#define RCC_POSITION_HSITRIM (uint32_t)3U /*!< field position in register RCC_CR */ +#define RCC_POSITION_HSI14TRIM (uint32_t)3U /*!< field position in register RCC_CR2 */ +#define RCC_POSITION_HSI14CAL (uint32_t)8U /*!< field position in register RCC_CR2 */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_POSITION_HSI48CAL (uint32_t)24U /*!< field position in register RCC_CR2 */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_POSITION_USART1SW (uint32_t)0U /*!< field position in register RCC_CFGR3 */ +#define RCC_POSITION_USART2SW (uint32_t)16U /*!< field position in register RCC_CFGR3 */ +#define RCC_POSITION_USART3SW (uint32_t)18U /*!< field position in register RCC_CFGR3 */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 8000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if defined(RCC_HSI48_SUPPORT) + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CIR_HSI14RDYC RCC_CIR_HSI14RDYC /*!< HSI14 Ready Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIR_HSI48RDYC RCC_CIR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIR_HSI14RDYF RCC_CIR_HSI14RDYF /*!< HSI14 Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIR_HSI48RDYF RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#if defined(RCC_CSR_V18PWRRSTF) +#define LL_RCC_CSR_V18PWRRSTF RCC_CSR_V18PWRRSTF /*!< Reset flag of the 1.8 V domain. */ +#endif /* RCC_CSR_V18PWRRSTF */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#define LL_RCC_CIR_HSI14RDYIE RCC_CIR_HSI14RDYIE /*!< HSI14 Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIR_HSI48RDYIE RCC_CIR_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +#if defined(RCC_CFGR_SW_HSI48) +#define LL_RCC_SYS_CLKSOURCE_HSI48 RCC_CFGR_SW_HSI48 /*!< HSI48 selection as system clock */ +#endif /* RCC_CFGR_SW_HSI48 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +#if defined(RCC_CFGR_SWS_HSI48) +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48 /*!< HSI48 used as system clock */ +#endif /* RCC_CFGR_SWS_HSI48 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCOSEL_HSI14 /*!< HSI14 oscillator clock selected */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_SYSCLK /*!< SYSCLK selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCOSEL_HSI /*!< HSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_HSE /*!< HSE selection as MCO source */ +#define LL_RCC_MCO1SOURCE_LSI RCC_CFGR_MCOSEL_LSI /*!< LSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_LSE /*!< LSE selection as MCO source */ +#if defined(RCC_CFGR_MCOSEL_HSI48) +#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_HSI48 /*!< HSI48 selection as MCO source */ +#endif /* RCC_CFGR_MCOSEL_HSI48 */ +#define LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 RCC_CFGR_MCOSEL_PLL_DIV2 /*!< PLL clock divided by 2*/ +#if defined(RCC_CFGR_PLLNODIV) +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_PLL_DIV2 | RCC_CFGR_PLLNODIV) /*!< PLL clock selected*/ +#endif /* RCC_CFGR_PLLNODIV */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 ((uint32_t)0x00000000U)/*!< MCO Clock divided by 1 */ +#if defined(RCC_CFGR_MCOPRE) +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO Clock divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO Clock divided by 4 */ +#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO Clock divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO Clock divided by 16 */ +#define LL_RCC_MCO1_DIV_32 RCC_CFGR_MCOPRE_DIV32 /*!< MCO Clock divided by 32 */ +#define LL_RCC_MCO1_DIV_64 RCC_CFGR_MCOPRE_DIV64 /*!< MCO Clock divided by 64 */ +#define LL_RCC_MCO1_DIV_128 RCC_CFGR_MCOPRE_DIV128 /*!< MCO Clock divided by 128 */ +#endif /* RCC_CFGR_MCOPRE */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_PCLK) /*!< PCLK1 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_SYSCLK) /*!< System clock selected as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_LSE) /*!< LSE oscillator clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_HSI) /*!< HSI oscillator clock used as USART1 clock source */ +#if defined(RCC_CFGR3_USART2SW) +#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_PCLK) /*!< PCLK1 clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_SYSCLK) /*!< System clock selected as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_LSE) /*!< LSE oscillator clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_HSI) /*!< HSI oscillator clock used as USART2 clock source */ +#endif /* RCC_CFGR3_USART2SW */ +#if defined(RCC_CFGR3_USART3SW) +#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_PCLK) /*!< PCLK1 clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_SYSCLK) /*!< System clock selected as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_LSE) /*!< LSE oscillator clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_HSI) /*!< HSI oscillator clock used as USART3 clock source */ +#endif /* RCC_CFGR3_USART3SW */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI /*!< HSI oscillator clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK /*!< System clock selected as I2C1 clock source */ +/** + * @} + */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_HSI_DIV244 RCC_CFGR3_CECSW_HSI_DIV244 /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */ +#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CFGR3_CECSW_LSE /*!< LSE clock selected as HDMI CEC entry clock source */ +/** + * @} + */ + +#endif /* CEC */ + +#if defined(USB) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_CFGR3_USBSW_HSI48) +#define LL_RCC_USB_CLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 oscillator clock used as USB clock source */ +#else +#define LL_RCC_USB_CLKSOURCE_NONE ((uint32_t)0x00000000) /*!< USB Clock disabled */ +#endif /*RCC_CFGR3_USBSW_HSI48*/ +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL selected as USB clock source */ +/** + * @} + */ + +#endif /* USB */ + +/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_POSITION_USART1SW /*!< USART1 Clock source selection */ +#if defined(RCC_CFGR3_USART2SW) +#define LL_RCC_USART2_CLKSOURCE RCC_POSITION_USART2SW /*!< USART2 Clock source selection */ +#endif /* RCC_CFGR3_USART2SW */ +#if defined(RCC_CFGR3_USART3SW) +#define LL_RCC_USART3_CLKSOURCE RCC_POSITION_USART3SW /*!< USART3 Clock source selection */ +#endif /* RCC_CFGR3_USART3SW */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE RCC_CFGR3_I2C1SW /*!< I2C1 Clock source selection */ +/** + * @} + */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_CFGR3_CECSW /*!< CEC Clock source selection */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(USB) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE RCC_CFGR3_USBSW /*!< USB Clock source selection */ +/** + * @} + */ +#endif /* USB */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor + * @{ + */ +#define LL_RCC_PLL_MUL_2 RCC_CFGR_PLLMUL2 /*!< PLL input clock*2 */ +#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMUL3 /*!< PLL input clock*3 */ +#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMUL4 /*!< PLL input clock*4 */ +#define LL_RCC_PLL_MUL_5 RCC_CFGR_PLLMUL5 /*!< PLL input clock*5 */ +#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMUL6 /*!< PLL input clock*6 */ +#define LL_RCC_PLL_MUL_7 RCC_CFGR_PLLMUL7 /*!< PLL input clock*7 */ +#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMUL8 /*!< PLL input clock*8 */ +#define LL_RCC_PLL_MUL_9 RCC_CFGR_PLLMUL9 /*!< PLL input clock*9 */ +#define LL_RCC_PLL_MUL_10 RCC_CFGR_PLLMUL10 /*!< PLL input clock*10 */ +#define LL_RCC_PLL_MUL_11 RCC_CFGR_PLLMUL11 /*!< PLL input clock*11 */ +#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMUL12 /*!< PLL input clock*12 */ +#define LL_RCC_PLL_MUL_13 RCC_CFGR_PLLMUL13 /*!< PLL input clock*13 */ +#define LL_RCC_PLL_MUL_14 RCC_CFGR_PLLMUL14 /*!< PLL input clock*14 */ +#define LL_RCC_PLL_MUL_15 RCC_CFGR_PLLMUL15 /*!< PLL input clock*15 */ +#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMUL16 /*!< PLL input clock*16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE + * @{ + */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as main PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE/PREDIV clock selected as PLL entry clock source */ +#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) +#define LL_RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI/PREDIV clock selected as PLL entry clock source */ +#if defined(RCC_CFGR_SW_HSI48) +#define LL_RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV /*!< HSI48/PREDIV clock selected as PLL entry clock source */ +#endif /* RCC_CFGR_SW_HSI48 */ +#else +#define LL_RCC_PLLSOURCE_HSI_DIV_2 RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV1) /*!< HSE clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV2) /*!< HSE/2 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_3 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV3) /*!< HSE/3 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_4 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV4) /*!< HSE/4 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_5 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV5) /*!< HSE/5 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_6 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV6) /*!< HSE/6 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_7 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV7) /*!< HSE/7 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_8 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV8) /*!< HSE/8 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_9 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV9) /*!< HSE/9 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_10 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV10) /*!< HSE/10 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_11 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV11) /*!< HSE/11 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_12 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV12) /*!< HSE/12 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_13 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV13) /*!< HSE/13 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_14 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV14) /*!< HSE/14 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_15 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV15) /*!< HSE/15 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE_DIV_16 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV16) /*!< HSE/16 clock selected as PLL entry clock source */ +#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PREDIV_DIV PREDIV Division factor + * @{ + */ +#define LL_RCC_PREDIV_DIV_1 RCC_CFGR2_PREDIV_DIV1 /*!< PREDIV input clock not divided */ +#define LL_RCC_PREDIV_DIV_2 RCC_CFGR2_PREDIV_DIV2 /*!< PREDIV input clock divided by 2 */ +#define LL_RCC_PREDIV_DIV_3 RCC_CFGR2_PREDIV_DIV3 /*!< PREDIV input clock divided by 3 */ +#define LL_RCC_PREDIV_DIV_4 RCC_CFGR2_PREDIV_DIV4 /*!< PREDIV input clock divided by 4 */ +#define LL_RCC_PREDIV_DIV_5 RCC_CFGR2_PREDIV_DIV5 /*!< PREDIV input clock divided by 5 */ +#define LL_RCC_PREDIV_DIV_6 RCC_CFGR2_PREDIV_DIV6 /*!< PREDIV input clock divided by 6 */ +#define LL_RCC_PREDIV_DIV_7 RCC_CFGR2_PREDIV_DIV7 /*!< PREDIV input clock divided by 7 */ +#define LL_RCC_PREDIV_DIV_8 RCC_CFGR2_PREDIV_DIV8 /*!< PREDIV input clock divided by 8 */ +#define LL_RCC_PREDIV_DIV_9 RCC_CFGR2_PREDIV_DIV9 /*!< PREDIV input clock divided by 9 */ +#define LL_RCC_PREDIV_DIV_10 RCC_CFGR2_PREDIV_DIV10 /*!< PREDIV input clock divided by 10 */ +#define LL_RCC_PREDIV_DIV_11 RCC_CFGR2_PREDIV_DIV11 /*!< PREDIV input clock divided by 11 */ +#define LL_RCC_PREDIV_DIV_12 RCC_CFGR2_PREDIV_DIV12 /*!< PREDIV input clock divided by 12 */ +#define LL_RCC_PREDIV_DIV_13 RCC_CFGR2_PREDIV_DIV13 /*!< PREDIV input clock divided by 13 */ +#define LL_RCC_PREDIV_DIV_14 RCC_CFGR2_PREDIV_DIV14 /*!< PREDIV input clock divided by 14 */ +#define LL_RCC_PREDIV_DIV_15 RCC_CFGR2_PREDIV_DIV15 /*!< PREDIV input clock divided by 15 */ +#define LL_RCC_PREDIV_DIV_16 RCC_CFGR2_PREDIV_DIV16 /*!< PREDIV input clock divided by 16 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) +/** + * @brief Helper macro to calculate the PLLCLK frequency + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetMultiplicator() + * , @ref LL_RCC_PLL_GetPrediv()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/HSI48) + * @param __PLLMUL__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + * @param __PLLPREDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PREDIV_DIV_1 + * @arg @ref LL_RCC_PREDIV_DIV_2 + * @arg @ref LL_RCC_PREDIV_DIV_3 + * @arg @ref LL_RCC_PREDIV_DIV_4 + * @arg @ref LL_RCC_PREDIV_DIV_5 + * @arg @ref LL_RCC_PREDIV_DIV_6 + * @arg @ref LL_RCC_PREDIV_DIV_7 + * @arg @ref LL_RCC_PREDIV_DIV_8 + * @arg @ref LL_RCC_PREDIV_DIV_9 + * @arg @ref LL_RCC_PREDIV_DIV_10 + * @arg @ref LL_RCC_PREDIV_DIV_11 + * @arg @ref LL_RCC_PREDIV_DIV_12 + * @arg @ref LL_RCC_PREDIV_DIV_13 + * @arg @ref LL_RCC_PREDIV_DIV_14 + * @arg @ref LL_RCC_PREDIV_DIV_15 + * @arg @ref LL_RCC_PREDIV_DIV_16 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__, __PLLPREDIV__) \ + (((__INPUTFREQ__) / ((((__PLLPREDIV__) & RCC_CFGR2_PREDIV) + 1U))) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U)) + +#else +/** + * @brief Helper macro to calculate the PLLCLK frequency + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv / HSI div 2) + * @param __PLLMUL__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) \ + ((__INPUTFREQ__) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U)) +#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ +/** + * @brief Helper macro to calculate the HCLK frequency + * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler + * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler()) + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler + * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler()) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos]) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Disable the Clock Security System. + * @note Cannot be disabled in HSE is ready (only by hardware) + * @rmtoll CR CSSON LL_RCC_HSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 16, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value between Min_Data = 0x00 and Max_Data = 0x1F + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0x00 and Max_Data = 0x1F + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); +} + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 + * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR2, RCC_CR2_HSI48ON); +} + +/** + * @brief Disable HSI48 + * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON); +} + +/** + * @brief Check if HSI48 oscillator Ready + * @rmtoll CR2 HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return (READ_BIT(RCC->CR2, RCC_CR2_HSI48RDY) == (RCC_CR2_HSI48RDY)); +} + +/** + * @brief Get HSI48 Calibration value + * @rmtoll CR2 HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48CAL) >> RCC_POSITION_HSI48CAL); +} + +/** + * @} + */ + +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_LL_EF_HSI14 HSI14 + * @{ + */ + +/** + * @brief Enable HSI14 + * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI14_Enable(void) +{ + SET_BIT(RCC->CR2, RCC_CR2_HSI14ON); +} + +/** + * @brief Disable HSI14 + * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI14_Disable(void) +{ + CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON); +} + +/** + * @brief Check if HSI14 oscillator Ready + * @rmtoll CR2 HSI14RDY LL_RCC_HSI14_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI14_IsReady(void) +{ + return (READ_BIT(RCC->CR2, RCC_CR2_HSI14RDY) == (RCC_CR2_HSI14RDY)); +} + +/** + * @brief ADC interface can turn on the HSI14 oscillator + * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_EnableADCControl + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI14_EnableADCControl(void) +{ + CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS); +} + +/** + * @brief ADC interface can not turn on the HSI14 oscillator + * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_DisableADCControl + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI14_DisableADCControl(void) +{ + SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS); +} + +/** + * @brief Set HSI14 Calibration trimming + * @note user-programmable trimming value that is added to the HSI14CAL + * @note Default value is 16, which, when added to the HSI14CAL value, + * should trim the HSI14 to 14 MHz +/- 1 % + * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_SetCalibTrimming + * @param Value between Min_Data = 0x00 and Max_Data = 0xFF + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI14_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, Value << RCC_POSITION_HSI14TRIM); +} + +/** + * @brief Get HSI14 Calibration value + * @note When HSI14TRIM is written, HSI14CAL is updated with the sum of + * HSI14TRIM and the factory trim value + * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_GetCalibTrimming + * @retval Between Min_Data = 0x00 and Max_Data = 0x1F + */ +__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14TRIM) >> RCC_POSITION_HSI14TRIM); +} + +/** + * @brief Get HSI14 Calibration trimming + * @rmtoll CR2 HSI14CAL LL_RCC_HSI14_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0x1F + */ +__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14CAL) >> RCC_POSITION_HSI14CAL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI48 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); +} + +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO\n + * CFGR PLLNODIV LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_HSI14 + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 + * + * (*) value not defined in all devices + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 (*) + * @arg @ref LL_RCC_MCO1_DIV_4 (*) + * @arg @ref LL_RCC_MCO1_DIV_8 (*) + * @arg @ref LL_RCC_MCO1_DIV_16 (*) + * @arg @ref LL_RCC_MCO1_DIV_32 (*) + * @arg @ref LL_RCC_MCO1_DIV_64 (*) + * @arg @ref LL_RCC_MCO1_DIV_128 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ +#if defined(RCC_CFGR_MCOPRE) +#if defined(RCC_CFGR_PLLNODIV) + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE | RCC_CFGR_PLLNODIV, MCOxSource | MCOxPrescaler); +#else + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +#endif /* RCC_CFGR_PLLNODIV */ +#else + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL, MCOxSource); +#endif /* RCC_CFGR_MCOPRE */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CFGR3 USART1SW LL_RCC_SetUSARTClockSource\n + * CFGR3 USART2SW LL_RCC_SetUSARTClockSource\n + * CFGR3 USART3SW LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CFGR3, (RCC_CFGR3_USART1SW << ((USARTxSource & 0xFF000000U) >> 24U)), (USARTxSource & 0x00FFFFFFU)); +} + +/** + * @brief Configure I2Cx clock source + * @rmtoll CFGR3 I2C1SW LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, I2CxSource); +} + +#if defined(CEC) +/** + * @brief Configure CEC clock source + * @rmtoll CFGR3 CECSW LL_RCC_SetCECClockSource + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource) +{ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, CECxSource); +} +#endif /* CEC */ + +#if defined(USB) +/** + * @brief Configure USB clock source + * @rmtoll CFGR3 USBSW LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, USBxSource); +} +#endif /* USB */ + +/** + * @brief Get USARTx clock source + * @rmtoll CFGR3 USART1SW LL_RCC_GetUSARTClockSource\n + * CFGR3 USART2SW LL_RCC_GetUSARTClockSource\n + * CFGR3 USART3SW LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE (*) + * + * (*) value not defined in all devices. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR3, (RCC_CFGR3_USART1SW << USARTx)) | (USARTx << 24U)); +} + +/** + * @brief Get I2Cx clock source + * @rmtoll CFGR3 I2C1SW LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR3, I2Cx)); +} + +#if defined(CEC) +/** + * @brief Get CEC clock source + * @rmtoll CFGR3 CECSW LL_RCC_GetCECClockSource + * @param CECx This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR3, CECx)); +} +#endif /* CEC */ + +#if defined(USB) +/** + * @brief Get USBx clock source + * @rmtoll CFGR3 USBSW LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CFGR3, USBx)); +} +#endif /* USB */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed any more unless + * the Backup domain is reset. The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); +} + +#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) +/** + * @brief Configure PLL used for SYSCLK Domain + * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) + * + * (*) value not defined in all devices + * @param PLLMul This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + * @param PLLDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_PREDIV_DIV_1 + * @arg @ref LL_RCC_PREDIV_DIV_2 + * @arg @ref LL_RCC_PREDIV_DIV_3 + * @arg @ref LL_RCC_PREDIV_DIV_4 + * @arg @ref LL_RCC_PREDIV_DIV_5 + * @arg @ref LL_RCC_PREDIV_DIV_6 + * @arg @ref LL_RCC_PREDIV_DIV_7 + * @arg @ref LL_RCC_PREDIV_DIV_8 + * @arg @ref LL_RCC_PREDIV_DIV_9 + * @arg @ref LL_RCC_PREDIV_DIV_10 + * @arg @ref LL_RCC_PREDIV_DIV_11 + * @arg @ref LL_RCC_PREDIV_DIV_12 + * @arg @ref LL_RCC_PREDIV_DIV_13 + * @arg @ref LL_RCC_PREDIV_DIV_14 + * @arg @ref LL_RCC_PREDIV_DIV_15 + * @arg @ref LL_RCC_PREDIV_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul, uint32_t PLLDiv) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, Source | PLLMul); + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, PLLDiv); +} + +#else + +/** + * @brief Configure PLL used for SYSCLK Domain + * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_1 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_2 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_3 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_4 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_5 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_6 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_7 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_8 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_9 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_10 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_11 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_12 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_13 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15 + * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16 + * @param PLLMul This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, (Source & RCC_CFGR_PLLSRC) | PLLMul); + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (Source & RCC_CFGR2_PREDIV)); +} +#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ + +/** + * @brief Configure PLL clock source + * @rmtoll CFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI (*) + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI (*) + * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*) + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)); +} + +/** + * @brief Get PLL multiplication Factor + * @rmtoll CFGR PLLMUL LL_RCC_PLL_GetMultiplicator + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_2 + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_5 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_7 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_9 + * @arg @ref LL_RCC_PLL_MUL_10 + * @arg @ref LL_RCC_PLL_MUL_11 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_13 + * @arg @ref LL_RCC_PLL_MUL_14 + * @arg @ref LL_RCC_PLL_MUL_15 + * @arg @ref LL_RCC_PLL_MUL_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMUL)); +} + +/** + * @brief Get PREDIV division factor for the main PLL + * @note They can be written only when the PLL is disabled + * @rmtoll CFGR2 PREDIV LL_RCC_PLL_GetPrediv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PREDIV_DIV_1 + * @arg @ref LL_RCC_PREDIV_DIV_2 + * @arg @ref LL_RCC_PREDIV_DIV_3 + * @arg @ref LL_RCC_PREDIV_DIV_4 + * @arg @ref LL_RCC_PREDIV_DIV_5 + * @arg @ref LL_RCC_PREDIV_DIV_6 + * @arg @ref LL_RCC_PREDIV_DIV_7 + * @arg @ref LL_RCC_PREDIV_DIV_8 + * @arg @ref LL_RCC_PREDIV_DIV_9 + * @arg @ref LL_RCC_PREDIV_DIV_10 + * @arg @ref LL_RCC_PREDIV_DIV_11 + * @arg @ref LL_RCC_PREDIV_DIV_12 + * @arg @ref LL_RCC_PREDIV_DIV_13 + * @arg @ref LL_RCC_PREDIV_DIV_14 + * @arg @ref LL_RCC_PREDIV_DIV_15 + * @arg @ref LL_RCC_PREDIV_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); +} + +/** + * @brief Clear HSI14 ready interrupt flag + * @rmtoll CIR HSI14RDYC LL_RCC_ClearFlag_HSI14RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI14RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYC); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CIR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYC); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_CSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); +} + +/** + * @brief Check if HSI14 ready interrupt occurred or not + * @rmtoll CIR HSI14RDYF LL_RCC_IsActiveFlag_HSI14RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI14RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYF) == (RCC_CIR_HSI14RDYF)); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYF) == (RCC_CIR_HSI48RDYF)); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); +} + +/** + * @brief Check if RCC flag is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); +} + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); +} + +#if defined(RCC_CSR_V18PWRRSTF) +/** + * @brief Check if RCC Reset flag of the 1.8 V domain is set or not. + * @rmtoll CSR V18PWRRSTF LL_RCC_IsActiveFlag_V18PWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_V18PWRRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_V18PWRRSTF) == (RCC_CSR_V18PWRRSTF)); +} +#endif /* RCC_CSR_V18PWRRSTF */ + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +/** + * @brief Enable HSI14 ready interrupt + * @rmtoll CIR HSI14RDYIE LL_RCC_EnableIT_HSI14RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI14RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIR HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +/** + * @brief Disable HSI14 ready interrupt + * @rmtoll CIR HSI14RDYIE LL_RCC_DisableIT_HSI14RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI14RDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIR HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); +} + +/** + * @brief Checks if HSI14 ready interrupt source is enabled or disabled. + * @rmtoll CIR HSI14RDYIE LL_RCC_IsEnabledIT_HSI14RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI14RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE) == (RCC_CIR_HSI14RDYIE)); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIR HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE) == (RCC_CIR_HSI48RDYIE)); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +#if defined(USB_OTG_FS) || defined(USB) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* USB_OTG_FS || USB */ +#if defined(CEC) +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +#endif /* CEC */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_RCC_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h new file mode 100644 index 00000000..84b7c4fa --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h @@ -0,0 +1,2284 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_LL_SPI_H +#define STM32F0xx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI2) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */ +#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */ +#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */ +#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */ +#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */ +#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */ +#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */ +#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */ +#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */ +#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */ +#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length + * @{ + */ +#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */ +#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold + * @{ + */ +#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equal to 1/2 (16-bit) */ +#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equal to 1/4 (8-bit) */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level + * @{ + */ +#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */ +#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */ +#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */ +#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level + * @{ + */ +#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */ +#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */ +#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */ +#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity + * @{ + */ +#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */ +#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR2 DS LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR2 DS LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS)); +} + +/** + * @brief Set threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold); +} + +/** + * @brief Get threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @brief Enable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Disable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Check if NSS pulse is enabled + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO reception Level + * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_EMPTY + * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_RX_FIFO_HALF_FULL + * @arg @ref LL_SPI_RX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL)); +} + +/** + * @brief Get FIFO Transmission Level + * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TX_FIFO_EMPTY + * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_TX_FIFO_HALF_FULL + * @arg @ref LL_SPI_TX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg_sr; + tmpreg_sr = SPIx->SR; + (void) tmpreg_sr; + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set parity of Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos); +} + +/** + * @brief Set parity of Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (*((__IO uint8_t *)&SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ +#if defined (__GNUC__) + __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR); + *spidr = TxData; +#else + *((__IO uint8_t *)&SPIx->DR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR); + *spidr = TxData; +#else + SPIx->DR = TxData; +#endif /* __GNUC__ */ +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) || defined (SPI2) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_LL_SPI_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h new file mode 100644 index 00000000..656200bc --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h @@ -0,0 +1,1851 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_SYSTEM_H +#define __STM32F0xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG Remap +* @{ +*/ +#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */ +/** + * @} + */ + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** @defgroup SYSTEM_LL_EC_IR_MOD SYSCFG IR Modulation + * @{ + */ +#define LL_SYSCFG_IR_MOD_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< Timer16 is selected as IR Modulation envelope source */ +#define LL_SYSCFG_IR_MOD_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< USART1 is selected as IR Modulation envelope source */ +#define LL_SYSCFG_IR_MOD_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< USART4 is selected as IR Modulation envelope source */ +/** + * @} + */ + +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_USART1TX_DMA_RMP) || defined(SYSCFG_CFGR1_USART1RX_DMA_RMP) || defined(SYSCFG_CFGR1_USART2_DMA_RMP) || defined(SYSCFG_CFGR1_USART3_DMA_RMP) +/** @defgroup SYSTEM_LL_EC_USART1TX_RMP SYSCFG USART DMA Remap + * @{ + */ +#if defined (SYSCFG_CFGR1_USART1TX_DMA_RMP) +#define LL_SYSCFG_USART1TX_RMP_DMA1CH2 ((SYSCFG_CFGR1_USART1TX_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART1_TX DMA request mapped on DMA channel 2U */ +#define LL_SYSCFG_USART1TX_RMP_DMA1CH4 ((SYSCFG_CFGR1_USART1TX_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1_TX DMA request mapped on DMA channel 4U */ +#endif /*SYSCFG_CFGR1_USART1TX_DMA_RMP*/ +#if defined (SYSCFG_CFGR1_USART1RX_DMA_RMP) +#define LL_SYSCFG_USART1RX_RMP_DMA1CH3 ((SYSCFG_CFGR1_USART1RX_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART1_RX DMA request mapped on DMA channel 3U */ +#define LL_SYSCFG_USART1RX_RMP_DMA1CH5 ((SYSCFG_CFGR1_USART1RX_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1_RX DMA request mapped on DMA channel 5 */ +#endif /*SYSCFG_CFGR1_USART1RX_DMA_RMP*/ +#if defined (SYSCFG_CFGR1_USART2_DMA_RMP) +#define LL_SYSCFG_USART2_RMP_DMA1CH54 ((SYSCFG_CFGR1_USART2_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4U respectively */ +#define LL_SYSCFG_USART2_RMP_DMA1CH67 ((SYSCFG_CFGR1_USART2_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively */ +#endif /*SYSCFG_CFGR1_USART2_DMA_RMP*/ +#if defined (SYSCFG_CFGR1_USART3_DMA_RMP) +#define LL_SYSCFG_USART3_RMP_DMA1CH67 ((SYSCFG_CFGR1_USART3_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively */ +#define LL_SYSCFG_USART3_RMP_DMA1CH32 ((SYSCFG_CFGR1_USART3_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3_RX and USART3_TX DMA requests mapped on DMA channel 3U and 2U respectively */ +#endif /* SYSCFG_CFGR1_USART3_DMA_RMP */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_USART1TX_DMA_RMP || SYSCFG_CFGR1_USART1RX_DMA_RMP || SYSCFG_CFGR1_USART2_DMA_RMP || SYSCFG_CFGR1_USART3_DMA_RMP */ + +#if defined (SYSCFG_CFGR1_SPI2_DMA_RMP) +/** @defgroup SYSTEM_LL_EC_SPI2_RMP_DMA1 SYSCFG SPI2 DMA Remap + * @{ + */ +#define LL_SYSCFG_SPI2_RMP_DMA1_CH45 (uint32_t)0x00000000U /*!< SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4U and 5 respectively */ +#define LL_SYSCFG_SPI2_RMP_DMA1_CH67 SYSCFG_CFGR1_SPI2_DMA_RMP /*!< SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively */ +/** + * @} + */ + +#endif /*SYSCFG_CFGR1_SPI2_DMA_RMP*/ + +#if defined (SYSCFG_CFGR1_I2C1_DMA_RMP) +/** @defgroup SYSTEM_LL_EC_I2C1_RMP_DMA1 SYSCFG I2C1 DMA Remap + * @{ + */ +#define LL_SYSCFG_I2C1_RMP_DMA1_CH32 (uint32_t)0x00000000U /*!< I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3U and 2U respectively */ +#define LL_SYSCFG_I2C1_RMP_DMA1_CH76 SYSCFG_CFGR1_I2C1_DMA_RMP /*!< I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively */ +/** + * @} + */ + +#endif /*SYSCFG_CFGR1_I2C1_DMA_RMP*/ + +#if defined(SYSCFG_CFGR1_ADC_DMA_RMP) +/** @defgroup SYSTEM_LL_EC_ADC1_RMP_DMA1 SYSCFG ADC1 DMA Remap + * @{ + */ +#define LL_SYSCFG_ADC1_RMP_DMA1_CH1 (uint32_t)0x00000000U /*!< ADC DMA request mapped on DMA channel 1U */ +#define LL_SYSCFG_ADC1_RMP_DMA1_CH2 SYSCFG_CFGR1_ADC_DMA_RMP /*!< ADC DMA request mapped on DMA channel 2U */ +/** + * @} + */ + +#endif /* SYSCFG_CFGR1_ADC_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP) || defined(SYSCFG_CFGR1_TIM17_DMA_RMP) || defined(SYSCFG_CFGR1_TIM1_DMA_RMP) || defined(SYSCFG_CFGR1_TIM2_DMA_RMP) || defined(SYSCFG_CFGR1_TIM3_DMA_RMP) +/** @defgroup SYSTEM_LL_EC_TIM16_RMP_DMA1 SYSCFG TIM DMA Remap + * @{ + */ +#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP) +#if defined (SYSCFG_CFGR1_TIM16_DMA_RMP2) +#define LL_SYSCFG_TIM16_RMP_DMA1_CH3 (((SYSCFG_CFGR1_TIM16_DMA_RMP | SYSCFG_CFGR1_TIM16_DMA_RMP2) >> 8U) | (uint32_t)0x00000000U) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3 */ +#define LL_SYSCFG_TIM16_RMP_DMA1_CH4 (((SYSCFG_CFGR1_TIM16_DMA_RMP | SYSCFG_CFGR1_TIM16_DMA_RMP2) >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4 */ +#define LL_SYSCFG_TIM16_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM16_DMA_RMP2 >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6 */ +#else +#define LL_SYSCFG_TIM16_RMP_DMA1_CH3 ((SYSCFG_CFGR1_TIM16_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3 */ +#define LL_SYSCFG_TIM16_RMP_DMA1_CH4 ((SYSCFG_CFGR1_TIM16_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4 */ +#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP2 */ +#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP */ +#if defined(SYSCFG_CFGR1_TIM17_DMA_RMP) +#if defined (SYSCFG_CFGR1_TIM17_DMA_RMP2) +#define LL_SYSCFG_TIM17_RMP_DMA1_CH1 (((SYSCFG_CFGR1_TIM17_DMA_RMP | SYSCFG_CFGR1_TIM17_DMA_RMP2) >> 8U) | (uint32_t)0x00000000U) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 */ +#define LL_SYSCFG_TIM17_RMP_DMA1_CH2 (((SYSCFG_CFGR1_TIM17_DMA_RMP | SYSCFG_CFGR1_TIM17_DMA_RMP2) >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2 */ +#define LL_SYSCFG_TIM17_RMP_DMA1_CH7 ((SYSCFG_CFGR1_TIM17_DMA_RMP2 >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7 */ +#else +#define LL_SYSCFG_TIM17_RMP_DMA1_CH1 ((SYSCFG_CFGR1_TIM17_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 */ +#define LL_SYSCFG_TIM17_RMP_DMA1_CH2 ((SYSCFG_CFGR1_TIM17_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2 */ +#endif /* SYSCFG_CFGR1_TIM17_DMA_RMP2 */ +#endif /* SYSCFG_CFGR1_TIM17_DMA_RMP */ +#if defined (SYSCFG_CFGR1_TIM1_DMA_RMP) +#define LL_SYSCFG_TIM1_RMP_DMA1_CH234 ((SYSCFG_CFGR1_TIM1_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMAchannel 2, 3 and 4 respectively */ +#define LL_SYSCFG_TIM1_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM1_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */ +#endif /*SYSCFG_CFGR1_TIM1_DMA_RMP*/ +#if defined (SYSCFG_CFGR1_TIM2_DMA_RMP) +#define LL_SYSCFG_TIM2_RMP_DMA1_CH34 ((SYSCFG_CFGR1_TIM2_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively */ +#define LL_SYSCFG_TIM2_RMP_DMA1_CH7 ((SYSCFG_CFGR1_TIM2_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */ +#endif /*SYSCFG_CFGR1_TIM2_DMA_RMP*/ +#if defined (SYSCFG_CFGR1_TIM3_DMA_RMP) +#define LL_SYSCFG_TIM3_RMP_DMA1_CH4 ((SYSCFG_CFGR1_TIM3_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4 */ +#define LL_SYSCFG_TIM3_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM3_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6 */ +#endif /*SYSCFG_CFGR1_TIM3_DMA_RMP*/ +/** + * @} + */ + +#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP || SYSCFG_CFGR1_TIM17_DMA_RMP || SYSCFG_CFGR1_TIM1_DMA_RMP || SYSCFG_CFGR1_TIM2_DMA_RMP || SYSCFG_CFGR1_TIM3_DMA_RMP */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< I2C PB6 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< I2C PB7 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< I2C PB8 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< I2C PB9 Fast mode plus */ +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */ +#endif /*SYSCFG_CFGR1_I2C_FMP_I2C1*/ +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /*!< Enable I2C2 Fast mode plus */ +#endif /*SYSCFG_CFGR1_I2C_FMP_I2C2*/ +#if defined(SYSCFG_CFGR1_I2C_FMP_PA9) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast Mode Plus on PA9 */ +#endif /*SYSCFG_CFGR1_I2C_FMP_PA9*/ +#if defined(SYSCFG_CFGR1_I2C_FMP_PA10) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast Mode Plus on PA10 */ +#endif /*SYSCFG_CFGR1_I2C_FMP_PA10*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT + * @{ + */ +#define LL_SYSCFG_EXTI_PORTA (uint32_t)0U /*!< EXTI PORT A */ +#define LL_SYSCFG_EXTI_PORTB (uint32_t)1U /*!< EXTI PORT B */ +#define LL_SYSCFG_EXTI_PORTC (uint32_t)2U /*!< EXTI PORT C */ +#if defined(GPIOD_BASE) +#define LL_SYSCFG_EXTI_PORTD (uint32_t)3U /*!< EXTI PORT D */ +#endif /*GPIOD_BASE*/ +#if defined(GPIOE_BASE) +#define LL_SYSCFG_EXTI_PORTE (uint32_t)4U /*!< EXTI PORT E */ +#endif /*GPIOE_BASE*/ +#define LL_SYSCFG_EXTI_PORTF (uint32_t)5U /*!< EXTI PORT F */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE + * @{ + */ +#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0U << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(4U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(8U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(12U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0U << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(4U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(8U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(12U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0U << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(4U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(8U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(12U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0U << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(4U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(8U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(12U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#if defined(SYSCFG_CFGR2_PVD_LOCK) +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection + with TIM1/15/16U/17 Break Input and also + the PVDE and PLS bits of the Power Control Interface */ +#endif /*SYSCFG_CFGR2_PVD_LOCK*/ +#define LL_SYSCFG_TIMBREAK_SRAM_PARITY SYSCFG_CFGR2_SRAM_PARITY_LOCK /*!< Enables and locks the SRAM_PARITY error signal + with Break Input of TIM1/15/16/17 */ +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP (Hardfault) output of + CortexM0 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ +#endif /*DBGMCU_APB1_FZ_DBG_TIM2_STOP*/ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ +#endif /*DBGMCU_APB1_FZ_DBG_TIM6_STOP*/ +#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ +#endif /*DBGMCU_APB1_FZ_DBG_TIM7_STOP*/ +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN_STOP DBGMCU_APB1_FZ_DBG_CAN_STOP /*!< CAN debug stopped when Core is halted */ +#endif /*DBGMCU_APB1_FZ_DBG_CAN_STOP*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1 GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP2_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP) +#define LL_DBGMCU_APB1_GRP2_TIM15_STOP DBGMCU_APB2_FZ_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */ +#endif /*DBGMCU_APB2_FZ_DBG_TIM15_STOP*/ +#define LL_DBGMCU_APB1_GRP2_TIM16_STOP DBGMCU_APB2_FZ_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP2_TIM17_STOP DBGMCU_APB2_FZ_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)); +} + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** + * @brief Set IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_SetIRModEnvelopeSignal + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRModEnvelopeSignal(uint32_t Source) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD, Source); +} + +/** + * @brief Get IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_GetIRModEnvelopeSignal + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRModEnvelopeSignal(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD)); +} +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_USART1TX_DMA_RMP) || defined(SYSCFG_CFGR1_USART1RX_DMA_RMP) || defined(SYSCFG_CFGR1_USART2_DMA_RMP) || defined(SYSCFG_CFGR1_USART3_DMA_RMP) +/** + * @brief Set DMA request remapping bits for USART + * @rmtoll SYSCFG_CFGR1 USART1TX_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n + * SYSCFG_CFGR1 USART1RX_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n + * SYSCFG_CFGR1 USART2_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n + * SYSCFG_CFGR1 USART3_DMA_RMP LL_SYSCFG_SetRemapDMA_USART + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_USART1TX_RMP_DMA1CH2 (*) + * @arg @ref LL_SYSCFG_USART1TX_RMP_DMA1CH4 (*) + * @arg @ref LL_SYSCFG_USART1RX_RMP_DMA1CH3 (*) + * @arg @ref LL_SYSCFG_USART1RX_RMP_DMA1CH5 (*) + * @arg @ref LL_SYSCFG_USART2_RMP_DMA1CH54 (*) + * @arg @ref LL_SYSCFG_USART2_RMP_DMA1CH67 (*) + * @arg @ref LL_SYSCFG_USART3_RMP_DMA1CH67 (*) + * @arg @ref LL_SYSCFG_USART3_RMP_DMA1CH32 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_USART(uint32_t Remap) +{ + MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF00FFU) << 8U, (Remap & 0xFF00FF00U)); +} +#endif /* SYSCFG_CFGR1_USART1TX_DMA_RMP || SYSCFG_CFGR1_USART1RX_DMA_RMP || SYSCFG_CFGR1_USART2_DMA_RMP || SYSCFG_CFGR1_USART3_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_SPI2_DMA_RMP) +/** + * @brief Set DMA request remapping bits for SPI + * @rmtoll SYSCFG_CFGR1 SPI2_DMA_RMP LL_SYSCFG_SetRemapDMA_SPI + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_SPI2_RMP_DMA1_CH45 + * @arg @ref LL_SYSCFG_SPI2_RMP_DMA1_CH67 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_SPI(uint32_t Remap) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_SPI2_DMA_RMP, Remap); +} +#endif /* SYSCFG_CFGR1_SPI2_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_I2C1_DMA_RMP) +/** + * @brief Set DMA request remapping bits for I2C + * @rmtoll SYSCFG_CFGR1 I2C1_DMA_RMP LL_SYSCFG_SetRemapDMA_I2C + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_I2C1_RMP_DMA1_CH32 + * @arg @ref LL_SYSCFG_I2C1_RMP_DMA1_CH76 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_I2C(uint32_t Remap) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_I2C1_DMA_RMP, Remap); +} +#endif /* SYSCFG_CFGR1_I2C1_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_ADC_DMA_RMP) +/** + * @brief Set DMA request remapping bits for ADC + * @rmtoll SYSCFG_CFGR1 ADC_DMA_RMP LL_SYSCFG_SetRemapDMA_ADC + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_ADC1_RMP_DMA1_CH1 + * @arg @ref LL_SYSCFG_ADC1_RMP_DMA1_CH2 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_ADC(uint32_t Remap) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_ADC_DMA_RMP, Remap); +} +#endif /* SYSCFG_CFGR1_ADC_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP) || defined(SYSCFG_CFGR1_TIM17_DMA_RMP) || defined(SYSCFG_CFGR1_TIM1_DMA_RMP) || defined(SYSCFG_CFGR1_TIM2_DMA_RMP) || defined(SYSCFG_CFGR1_TIM3_DMA_RMP) +/** + * @brief Set DMA request remapping bits for TIM + * @rmtoll SYSCFG_CFGR1 TIM16_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM17_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM16_DMA_RMP2 LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM17_DMA_RMP2 LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM1_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM2_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n + * SYSCFG_CFGR1 TIM3_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH3 (*) + * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH4 (*) + * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH6 (*) + * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH1 (*) + * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH2 (*) + * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH7 (*) + * @arg @ref LL_SYSCFG_TIM1_RMP_DMA1_CH234 (*) + * @arg @ref LL_SYSCFG_TIM1_RMP_DMA1_CH6 (*) + * @arg @ref LL_SYSCFG_TIM2_RMP_DMA1_CH34 (*) + * @arg @ref LL_SYSCFG_TIM2_RMP_DMA1_CH7 (*) + * @arg @ref LL_SYSCFG_TIM3_RMP_DMA1_CH4 (*) + * @arg @ref LL_SYSCFG_TIM3_RMP_DMA1_CH6 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_TIM(uint32_t Remap) +{ + MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF00FFU) << 8U, (Remap & 0xFF00FF00U)); +} +#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP || SYSCFG_CFGR1_TIM17_DMA_RMP || SYSCFG_CFGR1_TIM1_DMA_RMP || SYSCFG_CFGR1_TIM2_DMA_RMP || SYSCFG_CFGR1_TIM3_DMA_RMP */ + +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +/** + * @brief Enable PIN pair PA11/12 mapped instead of PA9/10 (control the mapping of either + * PA9/10 or PA11/12 pin pair on small pin-count packages) + * @rmtoll SYSCFG_CFGR1 PA11_PA12_RMP LL_SYSCFG_EnablePinRemap + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnablePinRemap(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_PA11_PA12_RMP); +} + +/** + * @brief Disable PIN pair PA11/12 mapped instead of PA9/10 (control the mapping of either + * PA9/10 or PA11/12 pin pair on small pin-count packages) + * @rmtoll SYSCFG_CFGR1 PA11_PA12_RMP LL_SYSCFG_DisablePinRemap + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisablePinRemap(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_PA11_PA12_RMP); +} +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD (*) + * @arg @ref LL_SYSCFG_EXTI_PORTE (*) + * @arg @ref LL_SYSCFG_EXTI_PORTF + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], SYSCFG_EXTICR1_EXTI0 << (Line >> 16), Port << (Line >> 16)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD (*) + * @arg @ref LL_SYSCFG_EXTI_PORTE (*) + * @arg @ref LL_SYSCFG_EXTI_PORTF + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (SYSCFG_EXTICR1_EXTI0 << (Line >> 16))) >> (Line >> 16)); +} + +#if defined(SYSCFG_ITLINE0_SR_EWDG) +/** + * @brief Check if Window watchdog interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE0 SR_EWDG LL_SYSCFG_IsActiveFlag_WWDG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_WWDG(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[0], SYSCFG_ITLINE0_SR_EWDG) == (SYSCFG_ITLINE0_SR_EWDG)); +} +#endif /* SYSCFG_ITLINE0_SR_EWDG */ + +#if defined(SYSCFG_ITLINE1_SR_PVDOUT) +/** + * @brief Check if PVD supply monitoring interrupt occurred or not (EXTI line 16). + * @rmtoll SYSCFG_ITLINE1 SR_PVDOUT LL_SYSCFG_IsActiveFlag_PVDOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVDOUT(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVDOUT) == (SYSCFG_ITLINE1_SR_PVDOUT)); +} +#endif /* SYSCFG_ITLINE1_SR_PVDOUT */ + +#if defined(SYSCFG_ITLINE1_SR_VDDIO2) +/** + * @brief Check if VDDIO2 supply monitoring interrupt occurred or not (EXTI line 31). + * @rmtoll SYSCFG_ITLINE1 SR_VDDIO2 LL_SYSCFG_IsActiveFlag_VDDIO2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_VDDIO2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_VDDIO2) == (SYSCFG_ITLINE1_SR_VDDIO2)); +} +#endif /* SYSCFG_ITLINE1_SR_VDDIO2 */ + +#if defined(SYSCFG_ITLINE2_SR_RTC_WAKEUP) +/** + * @brief Check if RTC Wake Up interrupt occurred or not (EXTI line 20). + * @rmtoll SYSCFG_ITLINE2 SR_RTC_WAKEUP LL_SYSCFG_IsActiveFlag_RTC_WAKEUP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_WAKEUP(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_WAKEUP) == (SYSCFG_ITLINE2_SR_RTC_WAKEUP)); +} +#endif /* SYSCFG_ITLINE2_SR_RTC_WAKEUP */ + +#if defined(SYSCFG_ITLINE2_SR_RTC_TSTAMP) +/** + * @brief Check if RTC Tamper and TimeStamp interrupt occurred or not (EXTI line 19). + * @rmtoll SYSCFG_ITLINE2 SR_RTC_TSTAMP LL_SYSCFG_IsActiveFlag_RTC_TSTAMP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_TSTAMP(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_TSTAMP) == (SYSCFG_ITLINE2_SR_RTC_TSTAMP)); +} +#endif /* SYSCFG_ITLINE2_SR_RTC_TSTAMP */ + +#if defined(SYSCFG_ITLINE2_SR_RTC_ALRA) +/** + * @brief Check if RTC Alarm interrupt occurred or not (EXTI line 17). + * @rmtoll SYSCFG_ITLINE2 SR_RTC_ALRA LL_SYSCFG_IsActiveFlag_RTC_ALRA + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_ALRA(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_ALRA) == (SYSCFG_ITLINE2_SR_RTC_ALRA)); +} +#endif /* SYSCFG_ITLINE2_SR_RTC_ALRA */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ITF) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ITF LL_SYSCFG_IsActiveFlag_FLASH_ITF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ITF(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ITF) == (SYSCFG_ITLINE3_SR_FLASH_ITF)); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ITF */ + +#if defined(SYSCFG_ITLINE4_SR_CRS) +/** + * @brief Check if Clock recovery system interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CRS LL_SYSCFG_IsActiveFlag_CRS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CRS(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CRS) == (SYSCFG_ITLINE4_SR_CRS)); +} +#endif /* SYSCFG_ITLINE4_SR_CRS */ + +#if defined(SYSCFG_ITLINE4_SR_CLK_CTRL) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CLK_CTRL LL_SYSCFG_IsActiveFlag_CLK_CTRL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CLK_CTRL(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CLK_CTRL) == (SYSCFG_ITLINE4_SR_CLK_CTRL)); +} +#endif /* SYSCFG_ITLINE4_SR_CLK_CTRL */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI0) +/** + * @brief Check if EXTI line 0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI0 LL_SYSCFG_IsActiveFlag_EXTI0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI0(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI0) == (SYSCFG_ITLINE5_SR_EXTI0)); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI0 */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI1) +/** + * @brief Check if EXTI line 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI1 LL_SYSCFG_IsActiveFlag_EXTI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI1) == (SYSCFG_ITLINE5_SR_EXTI1)); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI1 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI2) +/** + * @brief Check if EXTI line 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI2 LL_SYSCFG_IsActiveFlag_EXTI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI2) == (SYSCFG_ITLINE6_SR_EXTI2)); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI2 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI3) +/** + * @brief Check if EXTI line 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI3 LL_SYSCFG_IsActiveFlag_EXTI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI3(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI3) == (SYSCFG_ITLINE6_SR_EXTI3)); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI3 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI4) +/** + * @brief Check if EXTI line 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI4 LL_SYSCFG_IsActiveFlag_EXTI4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI4(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI4) == (SYSCFG_ITLINE7_SR_EXTI4)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI4 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI5) +/** + * @brief Check if EXTI line 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI5 LL_SYSCFG_IsActiveFlag_EXTI5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI5(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI5) == (SYSCFG_ITLINE7_SR_EXTI5)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI5 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI6) +/** + * @brief Check if EXTI line 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI6 LL_SYSCFG_IsActiveFlag_EXTI6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI6(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI6) == (SYSCFG_ITLINE7_SR_EXTI6)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI6 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI7) +/** + * @brief Check if EXTI line 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI7 LL_SYSCFG_IsActiveFlag_EXTI7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI7(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI7) == (SYSCFG_ITLINE7_SR_EXTI7)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI7 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI8) +/** + * @brief Check if EXTI line 8 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI8 LL_SYSCFG_IsActiveFlag_EXTI8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI8(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI8) == (SYSCFG_ITLINE7_SR_EXTI8)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI8 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI9) +/** + * @brief Check if EXTI line 9 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI9 LL_SYSCFG_IsActiveFlag_EXTI9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI9(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI9) == (SYSCFG_ITLINE7_SR_EXTI9)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI9 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI10) +/** + * @brief Check if EXTI line 10 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI10 LL_SYSCFG_IsActiveFlag_EXTI10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI10(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI10) == (SYSCFG_ITLINE7_SR_EXTI10)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI10 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI11) +/** + * @brief Check if EXTI line 11 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI11 LL_SYSCFG_IsActiveFlag_EXTI11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI11(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI11) == (SYSCFG_ITLINE7_SR_EXTI11)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI11 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI12) +/** + * @brief Check if EXTI line 12 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI12 LL_SYSCFG_IsActiveFlag_EXTI12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI12(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI12) == (SYSCFG_ITLINE7_SR_EXTI12)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI12 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI13) +/** + * @brief Check if EXTI line 13 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI13 LL_SYSCFG_IsActiveFlag_EXTI13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI13(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI13) == (SYSCFG_ITLINE7_SR_EXTI13)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI13 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI14) +/** + * @brief Check if EXTI line 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI14 LL_SYSCFG_IsActiveFlag_EXTI14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI14(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI14) == (SYSCFG_ITLINE7_SR_EXTI14)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI14 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI15) +/** + * @brief Check if EXTI line 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI15 LL_SYSCFG_IsActiveFlag_EXTI15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI15(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI15) == (SYSCFG_ITLINE7_SR_EXTI15)); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI15 */ + +#if defined(SYSCFG_ITLINE8_SR_TSC_EOA) +/** + * @brief Check if Touch sensing controller end of acquisition interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_TSC_EOA LL_SYSCFG_IsActiveFlag_TSC_EOA + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TSC_EOA(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_TSC_EOA) == (SYSCFG_ITLINE8_SR_TSC_EOA)); +} +#endif /* SYSCFG_ITLINE8_SR_TSC_EOA */ + +#if defined(SYSCFG_ITLINE8_SR_TSC_MCE) +/** + * @brief Check if Touch sensing controller max counterror interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_TSC_MCE LL_SYSCFG_IsActiveFlag_TSC_MCE + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TSC_MCE(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_TSC_MCE) == (SYSCFG_ITLINE8_SR_TSC_MCE)); +} +#endif /* SYSCFG_ITLINE8_SR_TSC_MCE */ + +#if defined(SYSCFG_ITLINE9_SR_DMA1_CH1) +/** + * @brief Check if DMA1 channel 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE9 SR_DMA1_CH1 LL_SYSCFG_IsActiveFlag_DMA1_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[9], SYSCFG_ITLINE9_SR_DMA1_CH1) == (SYSCFG_ITLINE9_SR_DMA1_CH1)); +} +#endif /* SYSCFG_ITLINE9_SR_DMA1_CH1 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH2) +/** + * @brief Check if DMA1 channel 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH2 LL_SYSCFG_IsActiveFlag_DMA1_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH2) == (SYSCFG_ITLINE10_SR_DMA1_CH2)); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH2 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH3) +/** + * @brief Check if DMA1 channel 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH3 LL_SYSCFG_IsActiveFlag_DMA1_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH3(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH3) == (SYSCFG_ITLINE10_SR_DMA1_CH3)); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH3 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA2_CH1) +/** + * @brief Check if DMA2 channel 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA2_CH1 LL_SYSCFG_IsActiveFlag_DMA2_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA2_CH1) == (SYSCFG_ITLINE10_SR_DMA2_CH1)); +} +#endif /* SYSCFG_ITLINE10_SR_DMA2_CH1 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA2_CH2) +/** + * @brief Check if DMA2 channel 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA2_CH2 LL_SYSCFG_IsActiveFlag_DMA2_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA2_CH2) == (SYSCFG_ITLINE10_SR_DMA2_CH2)); +} +#endif /* SYSCFG_ITLINE10_SR_DMA2_CH2 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH4) +/** + * @brief Check if DMA1 channel 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH4 LL_SYSCFG_IsActiveFlag_DMA1_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH4(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH4) == (SYSCFG_ITLINE11_SR_DMA1_CH4)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH5) +/** + * @brief Check if DMA1 channel 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH5 LL_SYSCFG_IsActiveFlag_DMA1_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH5(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH5) == (SYSCFG_ITLINE11_SR_DMA1_CH5)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH5 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH6) +/** + * @brief Check if DMA1 channel 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH6 LL_SYSCFG_IsActiveFlag_DMA1_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH6(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH6) == (SYSCFG_ITLINE11_SR_DMA1_CH6)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH6 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH7) +/** + * @brief Check if DMA1 channel 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH7 LL_SYSCFG_IsActiveFlag_DMA1_CH7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH7(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH7) == (SYSCFG_ITLINE11_SR_DMA1_CH7)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH7 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH3) +/** + * @brief Check if DMA2 channel 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH3 LL_SYSCFG_IsActiveFlag_DMA2_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH3(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH3) == (SYSCFG_ITLINE11_SR_DMA2_CH3)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH3 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH4) +/** + * @brief Check if DMA2 channel 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH4 LL_SYSCFG_IsActiveFlag_DMA2_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH4(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH4) == (SYSCFG_ITLINE11_SR_DMA2_CH4)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH5) +/** + * @brief Check if DMA2 channel 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH5 LL_SYSCFG_IsActiveFlag_DMA2_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH5(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH5) == (SYSCFG_ITLINE11_SR_DMA2_CH5)); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH5 */ + +#if defined(SYSCFG_ITLINE12_SR_ADC) +/** + * @brief Check if ADC interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE12 SR_ADC LL_SYSCFG_IsActiveFlag_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_ADC(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_ADC) == (SYSCFG_ITLINE12_SR_ADC)); +} +#endif /* SYSCFG_ITLINE12_SR_ADC */ + +#if defined(SYSCFG_ITLINE12_SR_COMP1) +/** + * @brief Check if Comparator 1 interrupt occurred or not (EXTI line 21). + * @rmtoll SYSCFG_ITLINE12 SR_COMP1 LL_SYSCFG_IsActiveFlag_COMP1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP1) == (SYSCFG_ITLINE12_SR_COMP1)); +} +#endif /* SYSCFG_ITLINE12_SR_COMP1 */ + +#if defined(SYSCFG_ITLINE12_SR_COMP2) +/** + * @brief Check if Comparator 2 interrupt occurred or not (EXTI line 22). + * @rmtoll SYSCFG_ITLINE12 SR_COMP2 LL_SYSCFG_IsActiveFlag_COMP2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP2) == (SYSCFG_ITLINE12_SR_COMP2)); +} +#endif /* SYSCFG_ITLINE12_SR_COMP2 */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_BRK) +/** + * @brief Check if Timer 1 break interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_BRK LL_SYSCFG_IsActiveFlag_TIM1_BRK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_BRK(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_BRK) == (SYSCFG_ITLINE13_SR_TIM1_BRK)); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_BRK */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_UPD) +/** + * @brief Check if Timer 1 update interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_UPD LL_SYSCFG_IsActiveFlag_TIM1_UPD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_UPD(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_UPD) == (SYSCFG_ITLINE13_SR_TIM1_UPD)); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_UPD */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_TRG) +/** + * @brief Check if Timer 1 trigger interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_TRG LL_SYSCFG_IsActiveFlag_TIM1_TRG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_TRG(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_TRG) == (SYSCFG_ITLINE13_SR_TIM1_TRG)); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_TRG */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_CCU) +/** + * @brief Check if Timer 1 commutation interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_CCU LL_SYSCFG_IsActiveFlag_TIM1_CCU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CCU(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_CCU) == (SYSCFG_ITLINE13_SR_TIM1_CCU)); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_CCU */ + +#if defined(SYSCFG_ITLINE14_SR_TIM1_CC) +/** + * @brief Check if Timer 1 capture compare interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE14 SR_TIM1_CC LL_SYSCFG_IsActiveFlag_TIM1_CC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CC(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[14], SYSCFG_ITLINE14_SR_TIM1_CC) == (SYSCFG_ITLINE14_SR_TIM1_CC)); +} +#endif /* SYSCFG_ITLINE14_SR_TIM1_CC */ + +#if defined(SYSCFG_ITLINE15_SR_TIM2_GLB) +/** + * @brief Check if Timer 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE15 SR_TIM2_GLB LL_SYSCFG_IsActiveFlag_TIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[15], SYSCFG_ITLINE15_SR_TIM2_GLB) == (SYSCFG_ITLINE15_SR_TIM2_GLB)); +} +#endif /* SYSCFG_ITLINE15_SR_TIM2_GLB */ + +#if defined(SYSCFG_ITLINE16_SR_TIM3_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM3_GLB LL_SYSCFG_IsActiveFlag_TIM3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM3(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM3_GLB) == (SYSCFG_ITLINE16_SR_TIM3_GLB)); +} +#endif /* SYSCFG_ITLINE16_SR_TIM3_GLB */ + +#if defined(SYSCFG_ITLINE17_SR_DAC) +/** + * @brief Check if DAC underrun interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_DAC LL_SYSCFG_IsActiveFlag_DAC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DAC(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_DAC) == (SYSCFG_ITLINE17_SR_DAC)); +} +#endif /* SYSCFG_ITLINE17_SR_DAC */ + +#if defined(SYSCFG_ITLINE17_SR_TIM6_GLB) +/** + * @brief Check if Timer 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_TIM6_GLB LL_SYSCFG_IsActiveFlag_TIM6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM6(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_TIM6_GLB) == (SYSCFG_ITLINE17_SR_TIM6_GLB)); +} +#endif /* SYSCFG_ITLINE17_SR_TIM6_GLB */ + +#if defined(SYSCFG_ITLINE18_SR_TIM7_GLB) +/** + * @brief Check if Timer 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE18 SR_TIM7_GLB LL_SYSCFG_IsActiveFlag_TIM7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM7(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_TIM7_GLB) == (SYSCFG_ITLINE18_SR_TIM7_GLB)); +} +#endif /* SYSCFG_ITLINE18_SR_TIM7_GLB */ + +#if defined(SYSCFG_ITLINE19_SR_TIM14_GLB) +/** + * @brief Check if Timer 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE19 SR_TIM14_GLB LL_SYSCFG_IsActiveFlag_TIM14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM14(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[19], SYSCFG_ITLINE19_SR_TIM14_GLB) == (SYSCFG_ITLINE19_SR_TIM14_GLB)); +} +#endif /* SYSCFG_ITLINE19_SR_TIM14_GLB */ + +#if defined(SYSCFG_ITLINE20_SR_TIM15_GLB) +/** + * @brief Check if Timer 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE20 SR_TIM15_GLB LL_SYSCFG_IsActiveFlag_TIM15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM15(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[20], SYSCFG_ITLINE20_SR_TIM15_GLB) == (SYSCFG_ITLINE20_SR_TIM15_GLB)); +} +#endif /* SYSCFG_ITLINE20_SR_TIM15_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_TIM16_GLB) +/** + * @brief Check if Timer 16 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_TIM16_GLB LL_SYSCFG_IsActiveFlag_TIM16 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM16(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_TIM16_GLB) == (SYSCFG_ITLINE21_SR_TIM16_GLB)); +} +#endif /* SYSCFG_ITLINE21_SR_TIM16_GLB */ + +#if defined(SYSCFG_ITLINE22_SR_TIM17_GLB) +/** + * @brief Check if Timer 17 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_TIM17_GLB LL_SYSCFG_IsActiveFlag_TIM17 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM17(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_TIM17_GLB) == (SYSCFG_ITLINE22_SR_TIM17_GLB)); +} +#endif /* SYSCFG_ITLINE22_SR_TIM17_GLB */ + +#if defined(SYSCFG_ITLINE23_SR_I2C1_GLB) +/** + * @brief Check if I2C1 interrupt occurred or not, combined with EXTI line 23. + * @rmtoll SYSCFG_ITLINE23 SR_I2C1_GLB LL_SYSCFG_IsActiveFlag_I2C1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[23], SYSCFG_ITLINE23_SR_I2C1_GLB) == (SYSCFG_ITLINE23_SR_I2C1_GLB)); +} +#endif /* SYSCFG_ITLINE23_SR_I2C1_GLB */ + +#if defined(SYSCFG_ITLINE24_SR_I2C2_GLB) +/** + * @brief Check if I2C2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE24 SR_I2C2_GLB LL_SYSCFG_IsActiveFlag_I2C2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C2_GLB) == (SYSCFG_ITLINE24_SR_I2C2_GLB)); +} +#endif /* SYSCFG_ITLINE24_SR_I2C2_GLB */ + +#if defined(SYSCFG_ITLINE25_SR_SPI1) +/** + * @brief Check if SPI1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE25 SR_SPI1 LL_SYSCFG_IsActiveFlag_SPI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[25], SYSCFG_ITLINE25_SR_SPI1) == (SYSCFG_ITLINE25_SR_SPI1)); +} +#endif /* SYSCFG_ITLINE25_SR_SPI1 */ + +#if defined(SYSCFG_ITLINE26_SR_SPI2) +/** + * @brief Check if SPI2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE26 SR_SPI2 LL_SYSCFG_IsActiveFlag_SPI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI2) == (SYSCFG_ITLINE26_SR_SPI2)); +} +#endif /* SYSCFG_ITLINE26_SR_SPI2 */ + +#if defined(SYSCFG_ITLINE27_SR_USART1_GLB) +/** + * @brief Check if USART1 interrupt occurred or not, combined with EXTI line 25. + * @rmtoll SYSCFG_ITLINE27 SR_USART1_GLB LL_SYSCFG_IsActiveFlag_USART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART1(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[27], SYSCFG_ITLINE27_SR_USART1_GLB) == (SYSCFG_ITLINE27_SR_USART1_GLB)); +} +#endif /* SYSCFG_ITLINE27_SR_USART1_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_USART2_GLB) +/** + * @brief Check if USART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_USART2_GLB LL_SYSCFG_IsActiveFlag_USART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART2(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_USART2_GLB) == (SYSCFG_ITLINE28_SR_USART2_GLB)); +} +#endif /* SYSCFG_ITLINE28_SR_USART2_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART3_GLB) +/** + * @brief Check if USART3 interrupt occurred or not, combined with EXTI line 28. + * @rmtoll SYSCFG_ITLINE29 SR_USART3_GLB LL_SYSCFG_IsActiveFlag_USART3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART3(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART3_GLB) == (SYSCFG_ITLINE29_SR_USART3_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART3_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART4_GLB) +/** + * @brief Check if USART4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART4_GLB LL_SYSCFG_IsActiveFlag_USART4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART4(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART4_GLB) == (SYSCFG_ITLINE29_SR_USART4_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART4_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART5_GLB) +/** + * @brief Check if USART5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART5_GLB LL_SYSCFG_IsActiveFlag_USART5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART5(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART5_GLB) == (SYSCFG_ITLINE29_SR_USART5_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART5_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART6_GLB) +/** + * @brief Check if USART6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART6_GLB LL_SYSCFG_IsActiveFlag_USART6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART6(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART6_GLB) == (SYSCFG_ITLINE29_SR_USART6_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART6_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART7_GLB) +/** + * @brief Check if USART7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART7_GLB LL_SYSCFG_IsActiveFlag_USART7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART7(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART7_GLB) == (SYSCFG_ITLINE29_SR_USART7_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART7_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART8_GLB) +/** + * @brief Check if USART8 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART8_GLB LL_SYSCFG_IsActiveFlag_USART8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART8(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART8_GLB) == (SYSCFG_ITLINE29_SR_USART8_GLB)); +} +#endif /* SYSCFG_ITLINE29_SR_USART8_GLB */ + +#if defined(SYSCFG_ITLINE30_SR_CAN) +/** + * @brief Check if CAN interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE30 SR_CAN LL_SYSCFG_IsActiveFlag_CAN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CAN(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CAN) == (SYSCFG_ITLINE30_SR_CAN)); +} +#endif /* SYSCFG_ITLINE30_SR_CAN */ + +#if defined(SYSCFG_ITLINE30_SR_CEC) +/** + * @brief Check if CEC interrupt occurred or not, combined with EXTI line 27. + * @rmtoll SYSCFG_ITLINE30 SR_CEC LL_SYSCFG_IsActiveFlag_CEC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CEC(void) +{ + return (READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CEC) == (SYSCFG_ITLINE30_SR_CEC)); +} +#endif /* SYSCFG_ITLINE30_SR_CEC */ + +/** + * @brief Set connections to TIMx Break inputs + * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ +#if defined(SYSCFG_CFGR2_PVD_LOCK) + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break); +#else + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK, Break); +#endif /*SYSCFG_CFGR2_PVD_LOCK*/ +} + +/** + * @brief Get connections to TIMx Break inputs + * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ +#if defined(SYSCFG_CFGR2_PVD_LOCK) + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, + SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK | SYSCFG_CFGR2_PVD_LOCK)); +#else + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK)); +#endif /*SYSCFG_CFGR2_PVD_LOCK*/ +} + +/** + * @brief Check if SRAM parity error detected + * @rmtoll SYSCFG_CFGR2 SRAM_PEF LL_SYSCFG_IsActiveFlag_SP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void) +{ + return (READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PEF) == (SYSCFG_CFGR2_SRAM_PEF)); +} + +/** + * @brief Clear SRAM parity error flag + * @rmtoll SYSCFG_CFGR2 SRAM_PEF LL_SYSCFG_ClearFlag_SP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void) +{ + SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PEF); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note For STM32F03x devices, the device ID is 0x444 + * @note For STM32F04x devices, the device ID is 0x445. + * @note For STM32F05x devices, the device ID is 0x440 + * @note For STM32F07x devices, the device ID is 0x448 + * @note For STM32F09x devices, the device ID is 0x442 + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as 0x1000 for Revision 1.0. + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Freeze APB1 peripherals (group2 peripherals) + * @rmtoll DBGMCU_APB2FZ DBG_TIM1_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM15_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM16_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM17_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group2 peripherals) + * @rmtoll DBGMCU_APB2FZ DBG_TIM1_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM15_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM16_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * DBGMCU_APB2FZ DBG_TIM17_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ, Periphs); +} +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS)); +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_SYSTEM_H */ + + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h new file mode 100644 index 00000000..cf9a8d0d --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h @@ -0,0 +1,4016 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_TIM_H +#define __STM32F0xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U /* 6: CC4P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U /* 6: OIS4 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + + +#define TIMx_OR_RMP_SHIFT 16U +#define TIMx_OR_RMP_MASK 0x0000FFFFU +#define TIM14_OR_RMP_MASK (TIM14_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as upcounter */ +#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ +#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ +#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ +#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division + * @{ + */ +#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction + * @{ + */ +#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ +#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source + * @{ + */ +#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ +#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request + * @{ + */ +#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ +#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level + * @{ + */ +#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ +#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CHANNEL Channel + * @{ + */ +#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ +#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ +#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ +#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ +#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ +#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ +#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State + * @{ + */ +#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ +#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode + * @{ + */ +#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity + * @{ + */ +#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ +#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State + * @{ + */ +#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Indicates whether the capture/compare control bits (CCxE, CCxNE and OCxM) preload is enabled. + * @rmtoll CR2 CCPC LL_TIM_CC_IsEnabledPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_CCPC) == (TIM_CR2_CCPC)) ? 1UL : 0UL); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS1N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS1N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); + /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM14_OR TI1_RMP LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap This parameter can be one of the following values: + * @arg @ref LL_TIM_TIM14_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM14_TI1_RMP_RTC_CLK + * @arg @ref LL_TIM_TIM14_TI1_RMP_HSE + * @arg @ref LL_TIM_TIM14_TI1_RMP_MCO + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management + * @{ + */ +/** + * @brief Set the OCREF clear input source + * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT + * @note This function can only be used in Output compare and PWM modes. + * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource + * @param TIMx Timer instance + * @param OCRefClearInputSource This parameter can be one of the following values: + * @arg @ref LL_TIM_OCREF_CLR_INT_OCREF_CLR + * @arg @ref LL_TIM_OCREF_CLR_INT_ETR + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_TIM_H */ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h new file mode 100644 index 00000000..a91b3fd3 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h @@ -0,0 +1,3849 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_LL_USART_H +#define STM32F0xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5) \ + || defined(USART6) || defined(USART7) || defined(USART8) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NCF USART_ICR_NCF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#if defined USART_LIN_SUPPORT +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#endif /* USART_LIN_SUPPORT */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#if defined USART_SMARTCARD_SUPPORT +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#endif /* USART_SMARTCARD_SUPPORT */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */ +#if defined USART_LIN_SUPPORT +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#endif /* USART_LIN_SUPPORT */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#if defined USART_SMARTCARD_SUPPORT +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#endif /* USART_SMARTCARD_SUPPORT */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#if defined(USART_SMARTCARD_SUPPORT) +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#endif /* USART_SMARTCARD_SUPPORT */ +#if defined(USART_LIN_SUPPORT) +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#endif /* USART_LIN_SUPPORT */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#if defined(USART_7BITS_SUPPORT) +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +#else +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +#endif /* USART_7BITS_SUPPORT */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#if defined(USART_SMARTCARD_SUPPORT) +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#endif /* USART_SMARTCARD_SUPPORT */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#if defined(USART_SMARTCARD_SUPPORT) +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#endif /* USART_SMARTCARD_SUPPORT */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#if defined(USART_FABR_SUPPORT) +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +#endif /* USART_FABR_SUPPORT */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUS) +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +#endif /* USART_CR3_WUS */ +#endif /* USART_CR1_UESM */ +#if defined(USART_IRDA_SUPPORT) +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ +#endif /* USART_IRDA_SUPPORT */ + +#if defined(USART_LIN_SUPPORT) +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ +#endif /* USART_LIN_SUPPORT */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__) + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_UESM) +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_UESM*/ +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B (*) + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * + * (*) Values not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B (*) + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * + * (*) Values not available on all devices + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 (*) + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 (*) + * @arg @ref LL_USART_STOPBITS_2 + * + * (*) Values not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 (*) + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 (*) + * @arg @ref LL_USART_STOPBITS_2 + * + * (*) Values not available on all devices + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B (*) + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 (*) + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 (*) + * @arg @ref LL_USART_STOPBITS_2 + * + * (*) Values not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME (*) + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (*) + * + * (*) Values not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME (*) + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (*) + * + * (*) Values not available on all devices + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUS) +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +#endif /* USART_CR3_WUS */ +#endif /* USART_CR1_UESM */ +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (PeriphClk * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +/** + * @} + */ + +#if defined(USART_IRDA_SUPPORT) +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ +#endif /* USART_IRDA_SUPPORT */ + +#if defined(USART_SMARTCARD_SUPPORT) +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ +#endif /* USART_SMARTCARD_SUPPORT */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USART_LIN_SUPPORT) +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif /* USART_LIN_SUPPORT */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported), CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard feature is supported), IREN (if Irda feature is supported) + and HDSEL bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_SMARTCARD_SUPPORT) +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ +#else +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +#endif /* USART_IRDA_SUPPORT */ +#endif /* USART_SMARTCARD_SUPPORT */ +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported) bit in the USART_CR2 register, + - SCEN (if Smartcard feature is supported), IREN (if Irda feature is supported) + and HDSEL bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_SMARTCARD_SUPPORT) +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ +#else +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +#endif /* USART_IRDA_SUPPORT */ +#endif /* USART_SMARTCARD_SUPPORT */ + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +#if defined(USART_LIN_SUPPORT) +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN (if Irda feature is supported) , SCEN (if Smartcard feature is supported) + and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); +#if defined(USART_SMARTCARD_SUPPORT) +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ +#else +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +#endif /* USART_IRDA_SUPPORT */ +#endif /* USART_SMARTCARD_SUPPORT */ + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} +#endif /* USART_LIN_SUPPORT */ + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported) and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard feature is supported) and IREN (if Irda feature is supported) bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_SMARTCARD_SUPPORT) +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN)); +#endif /* USART_IRDA_SUPPORT */ +#else +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN)); +#endif /* USART_IRDA_SUPPORT */ +#endif /* USART_SMARTCARD_SUPPORT */ + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported) bit in the USART_CR2 register, + - IREN (if Irda feature is supported) and HDSEL bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +#if defined(USART_IRDA_SUPPORT) +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported), STOP and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard feature is supported) and HDSEL bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); +#else + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_SMARTCARD_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL)); +#endif /* USART_SMARTCARD_SUPPORT */ + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} +#endif /* USART_IRDA_SUPPORT */ + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register (if LIN feature is supported), + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported), + * - IREN bit in the USART_CR3 register (if Irda feature is supported), + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported) + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported) + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported) + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN (if LIN feature is supported) and CLKEN bits in the USART_CR2 register, + - IREN (if Irda feature is supported), SCEN (if Smartcard feature is supported) + and HDSEL bits in the USART_CR3 register. + */ +#if defined(USART_LIN_SUPPORT) + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +#endif /* USART_LIN_SUPPORT */ +#if defined(USART_SMARTCARD_SUPPORT) +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ +#else +#if defined(USART_IRDA_SUPPORT) + CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL)); +#endif /* USART_IRDA_SUPPORT */ +#endif /* USART_SMARTCARD_SUPPORT*/ +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Read Data Register Not Empty Flag is set or not + * @rmtoll ISR RXNE LL_USART_IsActiveFlag_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Data Register Empty Flag is set or not + * @rmtoll ISR TXE LL_USART_IsActiveFlag_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE)) ? 1UL : 0UL); +} + +#if defined(USART_LIN_SUPPORT) +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} +#endif /* USART_LIN_SUPPORT */ + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NCF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NCF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + + +#if defined(USART_LIN_SUPPORT) +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} +#endif /* USART_LIN_SUPPORT */ + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +#if defined(USART_LIN_SUPPORT) +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +#endif /* USART_LIN_SUPPORT */ +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} +#endif /* USART_SMARTCARD_SUPPORT */ + +#if defined(USART_LIN_SUPPORT) +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} +#endif /* USART_LIN_SUPPORT */ + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)) ? 1U : 0U); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)) ? 1U : 0U); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +#endif /* USART_SMARTCARD_SUPPORT */ +#if defined(USART_LIN_SUPPORT) +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} +#endif /* USART_LIN_SUPPORT */ + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_UESM) +#if defined(USART_CR3_WUFIE) +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +#endif /* USART_CR3_WUFIE */ +#endif /* USART_CR1_UESM */ + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +#if defined(USART_SMARTCARD_SUPPORT) +/** + * @brief Request a Transmit data flush + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} +#endif /*USART_SMARTCARD_SUPPORT*/ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 || USART6 || USART7 || USART8 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_LL_USART_H */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h new file mode 100644 index 00000000..92191d79 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h @@ -0,0 +1,272 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_LL_UTILS_H +#define __STM32F0xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLL_MUL + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + +#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) + uint32_t PLLDiv; /*!< Division factor for PLL VCO output clock. + This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +#else + uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source. + This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS))); +} + + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Frequency of Ticks (Hz) + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +#if defined(FLASH_ACR_LATENCY) +ErrorStatus LL_SetFlashLatency(uint32_t Frequency); +#endif /* FLASH_ACR_LATENCY */ +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +#if defined(RCC_CFGR_SW_HSI48) +ErrorStatus LL_PLL_ConfigSystemClock_HSI48(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +#endif /*RCC_CFGR_SW_HSI48*/ +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_LL_UTILS_H */ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/LICENSE.txt b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/LICENSE.txt new file mode 100644 index 00000000..3edc4d14 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c index 940c0ca7..41e624b6 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c @@ -5,6 +5,17 @@ * @brief HAL module driver. * This is the common part of the HAL initialization * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -19,17 +30,6 @@ @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -52,11 +52,11 @@ * @{ */ /** - * @brief STM32F0xx HAL Driver version number V1.7.6 + * @brief STM32F0xx HAL Driver version number */ #define __STM32F0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ #define __STM32F0xx_HAL_VERSION_SUB1 (0x07U) /*!< [23:16] sub1 version */ -#define __STM32F0xx_HAL_VERSION_SUB2 (0x06U) /*!< [15:8] sub2 version */ +#define __STM32F0xx_HAL_VERSION_SUB2 (0x08U) /*!< [15:8] sub2 version */ #define __STM32F0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32F0xx_HAL_VERSION ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\ |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\ @@ -337,7 +337,8 @@ HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) /** * @brief return tick frequency. - * @retval tick period in Hz + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. */ HAL_TickFreqTypeDef HAL_GetTickFreq(void) { @@ -345,7 +346,7 @@ HAL_TickFreqTypeDef HAL_GetTickFreq(void) } /** - * @brief This function provides accurate delay (in milliseconds) based + * @brief This function provides accurate delay (in milliseconds) based * on variable incremented. * @note In the default implementation , SysTick timer is the source of time base. * It is used to generate interrupts at regular time intervals where uwTick @@ -511,4 +512,4 @@ void HAL_DBGMCU_DisableDBGStandbyMode(void) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c index 157426e7..b0ff76ae 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c @@ -68,13 +68,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -134,10 +133,13 @@ * @retval None */ void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ +{ /* Check the parameters */ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); NVIC_SetPriority(IRQn,PreemptPriority); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(SubPriority); } /** @@ -338,4 +340,3 @@ __weak void HAL_SYSTICK_Callback(void) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c index 0b3ab974..5662cb54 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c @@ -3,73 +3,72 @@ * @file stm32f0xx_hal_dma.c * @author MCD Application Team * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following + * + * This file provides firmware functions to manage the following * functionalities of the Direct Memory Access (DMA) peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral State and errors functions - @verbatim - ============================================================================== + @verbatim + ============================================================================== ##### How to use this driver ##### - ============================================================================== + ============================================================================== [..] (#) Enable and configure the peripheral to be connected to the DMA Channel - (except for internal SRAM / FLASH memories: no initialization is + (except for internal SRAM / FLASH memories: no initialization is necessary). Please refer to Reference manual for connection between peripherals and DMA requests . - (#) For a given Channel, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, + (#) For a given Channel, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, using HAL_DMA_Init() function. - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error detection. - + (#) Use HAL_DMA_Abort() function to abort the current transfer - + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source address and destination address and the Length of data to be transferred - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this case a fixed Timeout can be configured by User depending from his application. - *** Interrupt mode IO operation *** - =================================== + *** Interrupt mode IO operation *** + =================================== [..] (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. - In this case the DMA interrupt is configured + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). *** DMA HAL driver macros list *** - ============================================= + ============================================= [..] Below the list of most used macros in DMA HAL driver. - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros @endverbatim ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -110,41 +109,41 @@ static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); */ /** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions + * @brief Initialization and de-initialization functions * -@verbatim +@verbatim =============================================================================== ##### Initialization and de-initialization functions ##### - =============================================================================== + =============================================================================== [..] This section provides functions allowing to initialize the DMA Channel source - and destination addresses, incrementation and data sizes, transfer direction, + and destination addresses, incrementation and data sizes, transfer direction, circular/normal mode selection, memory-to-memory mode selection and Channel priority value. [..] The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. + reference manual. @endverbatim * @{ */ - + /** * @brief Initialize the DMA according to the specified * parameters in the DMA_InitTypeDef and initialize the associated handle. * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @retval HAL status */ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ +{ uint32_t tmp = 0U; - + /* Check the DMA handle allocation */ - if(NULL == hdma) + if (NULL == hdma) { return HAL_ERROR; } - + /* Check the parameters */ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); @@ -154,18 +153,18 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); assert_param(IS_DMA_MODE(hdma->Init.Mode)); assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - + /* Change DMA peripheral state */ hdma->State = HAL_DMA_STATE_BUSY; /* Get the CR register value */ tmp = hdma->Instance->CCR; - + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */ tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ DMA_CCR_DIR)); - + /* Prepare the DMA Channel configuration */ tmp |= hdma->Init.Direction | hdma->Init.PeriphInc | hdma->Init.MemInc | @@ -173,38 +172,38 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) hdma->Init.Mode | hdma->Init.Priority; /* Write to DMA Channel CR register */ - hdma->Instance->CCR = tmp; - - /* Initialize DmaBaseAddress and ChannelIndex parameters used + hdma->Instance->CCR = tmp; + + /* Initialize DmaBaseAddress and ChannelIndex parameters used by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ DMA_CalcBaseAndBitshift(hdma); - + /* Initialise the error code */ hdma->ErrorCode = HAL_DMA_ERROR_NONE; /* Initialize the DMA state*/ hdma->State = HAL_DMA_STATE_READY; - + /* Allocate lock resource and initialize it */ hdma->Lock = HAL_UNLOCKED; - + return HAL_OK; -} - +} + /** - * @brief DeInitialize the DMA peripheral + * @brief DeInitialize the DMA peripheral * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @retval HAL status */ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) { /* Check the DMA handle allocation */ - if(NULL == hdma) + if (NULL == hdma) { return HAL_ERROR; } - + /* Check the parameters */ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); @@ -219,11 +218,11 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) /* Reset DMA Channel peripheral address register */ hdma->Instance->CPAR = 0U; - + /* Reset DMA Channel memory address register */ hdma->Instance->CMAR = 0U; -/* Get DMA Base Address */ + /* Get DMA Base Address */ DMA_CalcBaseAndBitshift(hdma); /* Clear all flags */ @@ -251,20 +250,20 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) * @} */ -/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions - * @brief I/O operation functions +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief I/O operation functions * -@verbatim +@verbatim =============================================================================== ##### IO operation functions ##### - =============================================================================== + =============================================================================== [..] This section provides functions allowing to: (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and + (+) Configure the source, destination address and data length and Start DMA transfer with interrupt (+) Abort DMA transfer (+) Poll for transfer complete - (+) Handle DMA interrupt request + (+) Handle DMA interrupt request @endverbatim * @{ @@ -273,7 +272,7 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) /** * @brief Start the DMA Transfer. * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @param SrcAddress The source memory Buffer address * @param DstAddress The destination memory Buffer address * @param DataLength The length of data to be transferred from source to destination @@ -281,46 +280,46 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) */ HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) { - HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef status = HAL_OK; /* Check the parameters */ assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - + /* Process locked */ __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) + + if (HAL_DMA_STATE_READY == hdma->State) { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Disable the peripheral */ - hdma->Instance->CCR &= ~DMA_CCR_EN; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - hdma->Instance->CCR |= DMA_CCR_EN; + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; } else { - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Remain BUSY */ - status = HAL_BUSY; - } + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } - return status; -} + return status; +} /** * @brief Start the DMA Transfer with interrupt enabled. * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @param SrcAddress The source memory Buffer address * @param DstAddress The destination memory Buffer address * @param DataLength The length of data to be transferred from source to destination @@ -328,53 +327,53 @@ HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, ui */ HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) { - HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef status = HAL_OK; /* Check the parameters */ assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - + /* Process locked */ __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) + + if (HAL_DMA_STATE_READY == hdma->State) { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Disable the peripheral */ - hdma->Instance->CCR &= ~DMA_CCR_EN; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the transfer complete, & transfer error interrupts */ - /* Half transfer interrupt is optional: enable it only if associated callback is available */ - if(NULL != hdma->XferHalfCpltCallback ) + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete, & transfer error interrupts */ + /* Half transfer interrupt is optional: enable it only if associated callback is available */ + if (NULL != hdma->XferHalfCpltCallback) { hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); } - else - { - hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE); - hdma->Instance->CCR &= ~DMA_IT_HT; - } - - /* Enable the Peripheral */ - hdma->Instance->CCR |= DMA_CCR_EN; + else + { + hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE); + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; } else { - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + /* Remain BUSY */ status = HAL_BUSY; - } - - return status; -} + } + + return status; +} /** * @brief Abort the DMA Transfer. @@ -384,33 +383,33 @@ HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, */ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) { - if(hdma->State != HAL_DMA_STATE_BUSY) + if (hdma->State != HAL_DMA_STATE_BUSY) { /* no transfer ongoing */ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - + /* Process Unlocked */ __HAL_UNLOCK(hdma); - + return HAL_ERROR; } else { /* Disable DMA IT */ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); - + /* Disable the channel */ hdma->Instance->CCR &= ~DMA_CCR_EN; - + /* Clear all flags */ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); } /* Change the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - + hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ __HAL_UNLOCK(hdma); - + return HAL_OK; } @@ -421,39 +420,39 @@ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) * @retval HAL status */ HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ +{ HAL_StatusTypeDef status = HAL_OK; - - if(HAL_DMA_STATE_BUSY != hdma->State) + + if (HAL_DMA_STATE_BUSY != hdma->State) { /* no transfer ongoing */ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - + status = HAL_ERROR; } else - { - + { + /* Disable DMA IT */ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); - + /* Disable the channel */ hdma->Instance->CCR &= ~DMA_CCR_EN; - + /* Clear all flags */ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; - + /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; - + /* Process Unlocked */ __HAL_UNLOCK(hdma); - - /* Call User Abort callback */ - if(hdma->XferAbortCallback != NULL) + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) { hdma->XferAbortCallback(hdma); - } + } } return status; } @@ -462,7 +461,7 @@ HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) * @brief Polling for transfer complete. * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA Channel. - * @param CompleteLevel Specifies the DMA level complete. + * @param CompleteLevel Specifies the DMA level complete. * @param Timeout Timeout duration. * @retval HAL status */ @@ -470,24 +469,24 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t Comp { uint32_t temp; uint32_t tickstart = 0U; - - if(HAL_DMA_STATE_BUSY != hdma->State) + + if (HAL_DMA_STATE_BUSY != hdma->State) { /* no transfer ongoing */ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; __HAL_UNLOCK(hdma); return HAL_ERROR; } - + /* Polling mode not supported in circular mode */ if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) { hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; return HAL_ERROR; } - + /* Get the level transfer complete flag */ - if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) { /* Transfer Complete flag */ temp = DMA_FLAG_TC1 << hdma->ChannelIndex; @@ -501,34 +500,34 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t Comp /* Get tick */ tickstart = HAL_GetTick(); - while(RESET == (hdma->DmaBaseAddress->ISR & temp)) + while (RESET == (hdma->DmaBaseAddress->ISR & temp)) { - if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex))) - { + if (RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex))) + { /* When a DMA transfer error occurs */ /* A hardware clear of its EN bits is performed */ /* Clear all flags */ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; - + /* Update error code */ hdma->ErrorCode = HAL_DMA_ERROR_TE; /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - + hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } + + return HAL_ERROR; + } /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) + if (Timeout != HAL_MAX_DELAY) { - if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) { /* Update error code */ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - + /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; @@ -540,23 +539,23 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t Comp } } - if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) { /* Clear the transfer complete flag */ hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; - /* The selected Channelx EN bit is cleared (DMA is disabled and + /* The selected Channelx EN bit is cleared (DMA is disabled and all transfers are complete) */ hdma->State = HAL_DMA_STATE_READY; } else - { + { /* Clear the half transfer complete flag */ hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; } - + /* Process unlocked */ - __HAL_UNLOCK(hdma); + __HAL_UNLOCK(hdma); return HAL_OK; } @@ -564,141 +563,141 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t Comp /** * @brief Handle DMA interrupt request. * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @retval None */ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) { - uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t flag_it = hdma->DmaBaseAddress->ISR; uint32_t source_it = hdma->Instance->CCR; - + /* Half Transfer Complete Interrupt management ******************************/ if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT))) { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) - { - /* Disable the half transfer interrupt */ - hdma->Instance->CCR &= ~DMA_IT_HT; - } - - /* Clear the half transfer complete flag */ - hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; - - /* DMA peripheral state is not updated in Half Transfer */ - /* State is updated only in Transfer Complete case */ - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; + + /* DMA peripheral state is not updated in Half Transfer */ + /* State is updated only in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } } - + /* Transfer Complete Interrupt management ***********************************/ else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC))) { - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) - { - /* Disable the transfer complete & transfer error interrupts */ - /* if the DMA mode is not CIRCULAR */ - hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - } - - /* Clear the transfer complete flag */ - hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete & transfer error interrupts */ + /* if the DMA mode is not CIRCULAR */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } } - + /* Transfer Error Interrupt management ***************************************/ - else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + else if ((RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) { - /* When a DMA transfer error occurs */ + /* When a DMA transfer error occurs */ /* A hardware clear of its EN bits is performed */ /* Then, disable all DMA interrupts */ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); - + /* Clear all flags */ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; - + /* Update error code */ hdma->ErrorCode = HAL_DMA_ERROR_TE; - + /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - + hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferErrorCallback != NULL) + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); } - } -} + } +} /** * @brief Register callbacks * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifer + * @param CallbackID User Callback identifier * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @param pCallback pointer to private callback function which has pointer to + * @param pCallback pointer to private callback function which has pointer to * a DMA_HandleTypeDef structure as parameter. * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) { HAL_StatusTypeDef status = HAL_OK; - + /* Process locked */ __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) + + if (HAL_DMA_STATE_READY == hdma->State) { switch (CallbackID) { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - status = HAL_ERROR; - break; + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; } } else { status = HAL_ERROR; - } - + } + /* Release Lock */ __HAL_UNLOCK(hdma); - + return status; } @@ -706,57 +705,57 @@ HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Call * @brief UnRegister callbacks * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifer + * @param CallbackID User Callback identifier * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. * @retval HAL status - */ + */ HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ + /* Process locked */ __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) + + if (HAL_DMA_STATE_READY == hdma->State) { switch (CallbackID) { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; } } else { status = HAL_ERROR; - } - + } + /* Release Lock */ __HAL_UNLOCK(hdma); - + return status; } @@ -765,12 +764,12 @@ HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Ca */ /** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions + * @brief Peripheral State functions * -@verbatim +@verbatim =============================================================================== ##### State and Errors functions ##### - =============================================================================== + =============================================================================== [..] This subsection provides functions allowing to (+) Check the DMA state @@ -778,12 +777,12 @@ HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Ca @endverbatim * @{ - */ + */ /** * @brief Returns the DMA state. * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @retval HAL state */ HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) @@ -817,7 +816,7 @@ uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) /** * @brief Set the DMA Transfer parameters. * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. + * the configuration information for the specified DMA Channel. * @param SrcAddress The source memory Buffer address * @param DstAddress The destination memory Buffer address * @param DataLength The length of data to be transferred from source to destination @@ -825,18 +824,18 @@ uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) */ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) { - /* Clear all flags */ + /* Clear all flags */ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); - + /* Configure DMA Channel data length */ hdma->Instance->CNDTR = DataLength; - + /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { /* Configure DMA Channel destination address */ hdma->Instance->CPAR = DstAddress; - + /* Configure DMA Channel source address */ hdma->Instance->CMAR = SrcAddress; } @@ -845,7 +844,7 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t { /* Configure DMA Channel source address */ hdma->Instance->CPAR = SrcAddress; - + /* Configure DMA Channel destination address */ hdma->Instance->CMAR = DstAddress; } @@ -854,7 +853,7 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t /** * @brief set the DMA base address and channel index depending on DMA instance * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. + * the configuration information for the specified DMA Stream. * @retval None */ static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) @@ -867,7 +866,7 @@ static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; hdma->DmaBaseAddress = DMA1; } - else + else { /* DMA2 */ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; @@ -893,9 +892,8 @@ static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) /** * @} */ - - /** + +/** * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c index c5d1fb59..9ba520c1 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c @@ -8,6 +8,17 @@ * + Initialization and de-initialization functions * + IO operation functions * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### EXTI Peripheral features ##### @@ -53,7 +64,7 @@ (++) Provide exiting handle as parameter. (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. - (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine(). (++) Provide exiting handle as parameter. (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). @@ -64,23 +75,11 @@ (#) Get interrupt pending bit using HAL_EXTI_GetPending(). - (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + (#) Clear interrupt pending bit using HAL_EXTI_ClearPending(). (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -302,7 +301,7 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT assert_param(IS_EXTI_GPIO_PIN(linepos)); regval = SYSCFG->EXTICR[linepos >> 2u]; - pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0; } } @@ -546,4 +545,3 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c index a4a0821e..f0f35223 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c @@ -69,14 +69,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -691,4 +689,3 @@ static void FLASH_SetErrorCode(void) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c index 62d2ac91..291877e3 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c @@ -28,14 +28,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -981,4 +979,3 @@ void FLASH_PageErase(uint32_t PageAddress) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c index f15acf14..e1f6e2ca 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c @@ -7,7 +7,18 @@ * functionalities of the General Purpose Input/Output (GPIO) peripheral: * + Initialization and de-initialization functions * + IO operation functions - * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### GPIO Peripheral features ##### @@ -94,17 +105,6 @@ @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -249,39 +249,39 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); SYSCFG->EXTICR[position >> 2u] = temp; - /* Clear EXTI line configuration */ - temp = EXTI->IMR; + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; temp &= ~(iocurrent); - if((GPIO_Init->Mode & EXTI_IT) != 0x00u) + if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) { temp |= iocurrent; } - EXTI->IMR = temp; + EXTI->RTSR = temp; - temp = EXTI->EMR; + temp = EXTI->FTSR; temp &= ~(iocurrent); - if((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) { temp |= iocurrent; } - EXTI->EMR = temp; + EXTI->FTSR = temp; - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR; + /* Clear EXTI line configuration */ + temp = EXTI->EMR; temp &= ~(iocurrent); - if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + if((GPIO_Init->Mode & EXTI_EVT) != 0x00u) { temp |= iocurrent; } - EXTI->RTSR = temp; + EXTI->EMR = temp; - temp = EXTI->FTSR; + temp = EXTI->IMR; temp &= ~(iocurrent); - if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + if((GPIO_Init->Mode & EXTI_IT) != 0x00u) { temp |= iocurrent; } - EXTI->FTSR = temp; + EXTI->IMR = temp; } } @@ -326,8 +326,8 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) EXTI->EMR &= ~((uint32_t)iocurrent); /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~((uint32_t)iocurrent); EXTI->FTSR &= ~((uint32_t)iocurrent); + EXTI->RTSR &= ~((uint32_t)iocurrent); /* Configure the External Interrupt or event for the current IO */ tmp = 0x0FuL << (4u * (position & 0x03u)); @@ -441,7 +441,7 @@ void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) /* Check the parameters */ assert_param(IS_GPIO_PIN(GPIO_Pin)); - /* get current Ouput Data Register value */ + /* get current Output Data Register value */ odr = GPIOx->ODR; /* Set selected pins that were at low level, and reset ones that were high */ @@ -456,7 +456,7 @@ void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) * until the next reset. * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family * @param GPIO_Pin specifies the port bits to be locked. -* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* This parameter can be any combination of GPIO_PIN_x where x can be (0..15). * @retval None */ HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) @@ -537,4 +537,3 @@ __weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c index b38f6c98..e5ce5d90 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c @@ -9,6 +9,17 @@ * + IO operation functions * + Peripheral State and Errors functions * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### @@ -79,7 +90,7 @@ add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can add their own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. @@ -145,7 +156,7 @@ HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (++) Abort a master or memory IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() @@ -203,7 +214,7 @@ add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can add their own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. @@ -306,18 +317,6 @@ (@) You can refer to the I2C HAL driver header file for more useful macros @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -401,7 +400,16 @@ * @} */ -/* Private macro -------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +/** + * @} + */ + /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ @@ -416,6 +424,7 @@ static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); static void I2C_DMAError(DMA_HandleTypeDef *hdma); static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + /* Private functions to handle IT transfer */ static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); @@ -436,10 +445,14 @@ static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t /* Private functions for I2C transfer IRQ handler */ static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); @@ -452,8 +465,8 @@ static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Tickstart); static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); /* Private functions to centralize the enable/disable of Interrupts */ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); @@ -595,7 +608,12 @@ HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) /* Configure I2Cx: Addressing Master mode */ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) { - hi2c->Instance->CR2 = (I2C_CR2_ADD10); + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); } /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); @@ -705,6 +723,8 @@ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) /** * @brief Register a User I2C Callback * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param CallbackID ID of the callback to be registered @@ -735,8 +755,6 @@ HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_Call return HAL_ERROR; } - /* Process locked */ - __HAL_LOCK(hi2c); if (HAL_I2C_STATE_READY == hi2c->State) { @@ -825,14 +843,14 @@ HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_Call status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(hi2c); return status; } /** * @brief Unregister an I2C Callback * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param CallbackID ID of the callback to be unregistered @@ -855,9 +873,6 @@ HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_Ca { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ - __HAL_LOCK(hi2c); - if (HAL_I2C_STATE_READY == hi2c->State) { switch (CallbackID) @@ -945,8 +960,6 @@ HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_Ca status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(hi2c); return status; } @@ -969,8 +982,6 @@ HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_Add return HAL_ERROR; } - /* Process locked */ - __HAL_LOCK(hi2c); if (HAL_I2C_STATE_READY == hi2c->State) { @@ -985,8 +996,6 @@ HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_Add status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(hi2c); return status; } @@ -1001,9 +1010,6 @@ HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ - __HAL_LOCK(hi2c); - if (HAL_I2C_STATE_READY == hi2c->State) { hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ @@ -1017,8 +1023,6 @@ HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(hi2c); return status; } @@ -1116,6 +1120,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevA uint16_t Size, uint32_t Timeout) { uint32_t tickstart; + uint32_t xfermode; if (hi2c->State == HAL_I2C_STATE_READY) { @@ -1139,18 +1144,39 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevA hi2c->XferCount = Size; hi2c->XferISR = NULL; - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ if (hi2c->XferCount > MAX_NBYTE_SIZE) { hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_GENERATE_START_WRITE); + xfermode = I2C_RELOAD_MODE; } else { hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); } @@ -1262,7 +1288,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAd /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + hi2c->XferSize = 1U; I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); } @@ -1353,6 +1379,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData uint32_t Timeout) { uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; if (hi2c->State == HAL_I2C_STATE_READY) { @@ -1379,11 +1407,28 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData /* Enable Address Acknowledge */ hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + /* Wait until ADDR flag is set */ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) { /* Disable Address Acknowledge */ hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + return HAL_ERROR; } @@ -1398,6 +1443,10 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData { /* Disable Address Acknowledge */ hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + return HAL_ERROR; } @@ -1410,6 +1459,10 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData { /* Disable Address Acknowledge */ hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + return HAL_ERROR; } @@ -1432,26 +1485,48 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData hi2c->XferCount--; } - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) { - /* Normal use case for Transmitter mode */ - /* A NACK is generated to confirm the end of transfer */ + /* Reset ErrorCode to NONE */ hi2c->ErrorCode = HAL_I2C_ERROR_NONE; } else { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; return HAL_ERROR; } } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } /* Wait until BUSY flag is reset */ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) @@ -1512,6 +1587,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, /* Prepare transfer parameters */ hi2c->pBuffPtr = pData; hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; hi2c->XferISR = NULL; /* Enable Address Acknowledge */ @@ -1554,6 +1630,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, hi2c->pBuffPtr++; hi2c->XferCount--; + hi2c->XferSize--; } return HAL_ERROR; @@ -1566,6 +1643,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, hi2c->pBuffPtr++; hi2c->XferCount--; + hi2c->XferSize--; } /* Wait until STOP flag is set */ @@ -1652,7 +1730,26 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t D /* Send Slave Address */ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -1712,7 +1809,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t De if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + hi2c->XferSize = 1U; xfermode = I2C_RELOAD_MODE; } else @@ -1775,6 +1872,20 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pD hi2c->XferOptions = I2C_NO_OPTION_FRAME; hi2c->XferISR = I2C_Slave_ISR_IT; + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -1861,6 +1972,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t { uint32_t xfermode; HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; if (hi2c->State == HAL_I2C_STATE_READY) { @@ -1893,6 +2005,20 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t xfermode = I2C_AUTOEND_MODE; } + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + if (hi2c->XferSize > 0U) { if (hi2c->hdmatx != NULL) @@ -1908,8 +2034,8 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t hi2c->hdmatx->XferAbortCallback = NULL; /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); } else { @@ -1930,7 +2056,8 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t { /* Send Slave Address */ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); /* Update XferCount value */ hi2c->XferCount -= hi2c->XferSize; @@ -1969,7 +2096,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t /* Send Slave Address */ /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); /* Process Unlocked */ @@ -2031,7 +2158,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t D if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + hi2c->XferSize = 1U; xfermode = I2C_RELOAD_MODE; } else @@ -2125,11 +2252,11 @@ HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t D /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ /* possible to enable all of these */ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); } return HAL_OK; @@ -2173,38 +2300,87 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *p hi2c->XferOptions = I2C_NO_OPTION_FRAME; hi2c->XferISR = I2C_Slave_ISR_DMA; - if (hi2c->hdmatx != NULL) + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); + hi2c->XferCount--; + hi2c->XferSize--; } - else + + if (hi2c->XferCount != 0U) { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; - return HAL_ERROR; - } + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; - if (dmaxferstatus == HAL_OK) + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else { /* Enable Address Acknowledge */ hi2c->Instance->CR2 &= ~I2C_CR2_NACK; @@ -2213,27 +2389,10 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *p __HAL_UNLOCK(hi2c); /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ + to avoid the risk of I2C interrupt handle execution before current + process unlock */ /* Enable ERR, STOP, NACK, ADDR interrupts */ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; } return HAL_OK; @@ -2347,6 +2506,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pD return HAL_BUSY; } } + /** * @brief Write an amount of data in blocking mode to a specific memory address * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains @@ -2545,7 +2705,7 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + hi2c->XferSize = 1U; I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); } @@ -2583,7 +2743,7 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + hi2c->XferSize = 1U; I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); } @@ -2637,9 +2797,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) { - uint32_t tickstart; - uint32_t xfermode; - /* Check the parameters */ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); @@ -2659,41 +2816,38 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddr /* Process Locked */ __HAL_LOCK(hi2c); - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - hi2c->State = HAL_I2C_STATE_BUSY_TX; hi2c->Mode = HAL_I2C_MODE_MEM; hi2c->ErrorCode = HAL_I2C_ERROR_NONE; /* Prepare transfer parameters */ + hi2c->XferSize = 0U; hi2c->pBuffPtr = pData; hi2c->XferCount = Size; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; - if (hi2c->XferCount > MAX_NBYTE_SIZE) + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; } + /* If Memory address size is 16Bit */ else { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) - != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -2731,9 +2885,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddr HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) { - uint32_t tickstart; - uint32_t xfermode; - /* Check the parameters */ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); @@ -2753,9 +2904,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddre /* Process Locked */ __HAL_LOCK(hi2c); - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - hi2c->State = HAL_I2C_STATE_BUSY_RX; hi2c->Mode = HAL_I2C_MODE_MEM; hi2c->ErrorCode = HAL_I2C_ERROR_NONE; @@ -2764,29 +2912,29 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddre hi2c->pBuffPtr = pData; hi2c->XferCount = Size; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; - if (hi2c->XferCount > MAX_NBYTE_SIZE) + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; } + /* If Memory address size is 16Bit */ else { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -2795,11 +2943,11 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddre to avoid the risk of I2C interrupt handle execution before current process unlock */ - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ /* possible to enable all of these */ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); return HAL_OK; } @@ -2808,6 +2956,7 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddre return HAL_BUSY; } } + /** * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains @@ -2823,8 +2972,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddre HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) { - uint32_t tickstart; - uint32_t xfermode; HAL_StatusTypeDef dmaxferstatus; /* Check the parameters */ @@ -2846,9 +2993,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd /* Process Locked */ __HAL_LOCK(hi2c); - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - hi2c->State = HAL_I2C_STATE_BUSY_TX; hi2c->Mode = HAL_I2C_MODE_MEM; hi2c->ErrorCode = HAL_I2C_ERROR_NONE; @@ -2857,28 +3001,36 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd hi2c->pBuffPtr = pData; hi2c->XferCount = Size; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; if (hi2c->XferCount > MAX_NBYTE_SIZE) { hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; } else { hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; } - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) - != HAL_OK) + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } if (hi2c->hdmatx != NULL) { @@ -2913,12 +3065,8 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd if (dmaxferstatus == HAL_OK) { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -2926,11 +3074,11 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); } else { @@ -2970,8 +3118,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAdd HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) { - uint32_t tickstart; - uint32_t xfermode; HAL_StatusTypeDef dmaxferstatus; /* Check the parameters */ @@ -2993,9 +3139,6 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr /* Process Locked */ __HAL_LOCK(hi2c); - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - hi2c->State = HAL_I2C_STATE_BUSY_RX; hi2c->Mode = HAL_I2C_MODE_MEM; hi2c->ErrorCode = HAL_I2C_ERROR_NONE; @@ -3004,25 +3147,35 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr hi2c->pBuffPtr = pData; hi2c->XferCount = Size; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; if (hi2c->XferCount > MAX_NBYTE_SIZE) { hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; } else { hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; } - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); } if (hi2c->hdmarx != NULL) @@ -3058,11 +3211,8 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr if (dmaxferstatus == HAL_OK) { - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -3070,11 +3220,11 @@ HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddr /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); } else { @@ -3203,22 +3353,6 @@ HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAdd __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); } - /* Check if the maximum allowed number of trials has been reached */ - if (I2C_Trials == Trials) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - /* Increment Trials */ I2C_Trials++; } while (I2C_Trials < Trials); @@ -3257,6 +3391,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16 { uint32_t xfermode; uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; /* Check the parameters */ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); @@ -3288,6 +3423,21 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16 xfermode = hi2c->XferOptions; } + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ /* Mean Previous state is same as current state */ @@ -3309,7 +3459,14 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16 } /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -3317,6 +3474,10 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16 /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); return HAL_OK; @@ -3345,6 +3506,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 uint32_t xfermode; uint32_t xferrequest = I2C_GENERATE_START_WRITE; HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; /* Check the parameters */ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); @@ -3376,6 +3538,21 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 xfermode = hi2c->XferOptions; } + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ /* Mean Previous state is same as current state */ @@ -3411,8 +3588,8 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 hi2c->hdmatx->XferAbortCallback = NULL; /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); } else { @@ -3432,7 +3609,14 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 if (dmaxferstatus == HAL_OK) { /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } /* Update XferCount value */ hi2c->XferCount -= hi2c->XferSize; @@ -3471,8 +3655,14 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint1 /* Send Slave Address */ /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_WRITE); + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -3735,11 +3925,11 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16 /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ /* possible to enable all of these */ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); } return HAL_OK; @@ -3763,6 +3953,9 @@ HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16 HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) { + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + /* Check the parameters */ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); @@ -3822,7 +4015,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t hi2c->XferOptions = XferOptions; hi2c->XferISR = I2C_Slave_ISR_IT; - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) { /* Clear ADDR flag after prepare the transfer parameters */ /* This action will generate an acknowledge to the Master */ @@ -3859,6 +4053,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) { + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; HAL_StatusTypeDef dmaxferstatus; /* Check the parameters */ @@ -3893,7 +4089,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; /* Abort DMA RX */ @@ -3915,7 +4111,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ if (hi2c->hdmatx != NULL) { /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; /* Abort DMA TX */ @@ -4000,7 +4196,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ return HAL_ERROR; } - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) { /* Clear ADDR flag after prepare the transfer parameters */ /* This action will generate an acknowledge to the Master */ @@ -4010,15 +4207,15 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ /* Process Unlocked */ __HAL_UNLOCK(hi2c); + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ /* Enable ERR, STOP, NACK, ADDR interrupts */ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - return HAL_OK; } else @@ -4040,6 +4237,9 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) { + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + /* Check the parameters */ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); @@ -4099,7 +4299,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t hi2c->XferOptions = XferOptions; hi2c->XferISR = I2C_Slave_ISR_IT; - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) { /* Clear ADDR flag after prepare the transfer parameters */ /* This action will generate an acknowledge to the Master */ @@ -4136,6 +4337,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) { + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; HAL_StatusTypeDef dmaxferstatus; /* Check the parameters */ @@ -4277,7 +4480,8 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t return HAL_ERROR; } - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) { /* Clear ADDR flag after prepare the transfer parameters */ /* This action will generate an acknowledge to the Master */ @@ -4287,15 +4491,15 @@ HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t /* Process Unlocked */ __HAL_UNLOCK(hi2c); + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + /* Note : The I2C interrupts must be enabled after unlocking current process to avoid the risk of I2C interrupt handle execution before current process unlock */ /* REnable ADDR interrupt */ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - return HAL_OK; } else @@ -4360,7 +4564,7 @@ HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) } /** - * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @brief Abort a master or memory I2C IT or DMA process communication with Interrupt. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param DevAddress Target device address: The device 7 bits address value @@ -4369,7 +4573,9 @@ HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) */ HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) { - if (hi2c->Mode == HAL_I2C_MODE_MASTER) + HAL_I2C_ModeTypeDef tmp_mode = hi2c->Mode; + + if ((tmp_mode == HAL_I2C_MODE_MASTER) || (tmp_mode == HAL_I2C_MODE_MEM)) { /* Process Locked */ __HAL_LOCK(hi2c); @@ -4429,7 +4635,7 @@ HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevA * the configuration information for the specified I2C. * @retval None */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ { /* Get current IT Flags and IT sources value */ uint32_t itflags = READ_REG(hi2c->Instance->ISR); @@ -4682,7 +4888,7 @@ __weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) * the configuration information for the specified I2C. * @retval HAL state */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) { /* Return I2C handle state */ return hi2c->State; @@ -4694,7 +4900,7 @@ HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) * the configuration information for I2C module * @retval HAL mode */ -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) { return hi2c->Mode; } @@ -4705,7 +4911,7 @@ HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) * the configuration information for the specified I2C. * @retval I2C Error Code */ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) { return hi2c->ErrorCode; } @@ -4768,17 +4974,22 @@ static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uin hi2c->XferSize--; hi2c->XferCount--; } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) { /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; - hi2c->XferSize--; - hi2c->XferCount--; + hi2c->XferSize--; + hi2c->XferCount--; + } } else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) @@ -4789,7 +5000,15 @@ static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uin if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); } else @@ -4869,56 +5088,214 @@ static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uin } /** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param ITFlags Interrupt flags to handle. * @param ITSources Interrupt sources enabled. * @retval HAL status */ -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) { - uint32_t tmpoptions = hi2c->XferOptions; + uint32_t direction = I2C_GENERATE_START_WRITE; uint32_t tmpITFlags = ITFlags; - /* Process locked */ + /* Process Locked */ __HAL_LOCK(hi2c); - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, tmpITFlags); - } - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hi2c->XferCount == 0U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) - /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for - Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ I2C_ITSlaveSeqCplt(hi2c); } else @@ -5057,7 +5434,15 @@ static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, ui /* Prepare the new XferSize to transfer */ if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } xfermode = I2C_RELOAD_MODE; } else @@ -5149,6 +5534,170 @@ static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, ui return HAL_OK; } +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + /** * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains @@ -5174,9 +5723,8 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin /* Call I2C Slave complete process */ I2C_ITSlaveCplt(hi2c, ITFlags); } - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) { /* Check that I2C transfer finished */ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ @@ -5190,7 +5738,7 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin { if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) { treatdmanack = 1U; } @@ -5202,7 +5750,7 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin { if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) { treatdmanack = 1U; } @@ -5775,6 +6323,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) { uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; HAL_I2C_StateTypeDef tmpstate = hi2c->State; /* Clear STOP Flag */ @@ -5791,6 +6340,11 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } else { /* Do nothing */ @@ -5813,7 +6367,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) if (hi2c->hdmatx != NULL) { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); } } else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) @@ -5823,7 +6377,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) if (hi2c->hdmarx != NULL) { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); } } else @@ -5857,6 +6411,57 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) hi2c->ErrorCode |= HAL_I2C_ERROR_AF; } + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + hi2c->Mode = HAL_I2C_MODE_NONE; hi2c->XferISR = NULL; @@ -5984,6 +6589,7 @@ static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) { HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; /* Reset handle parameters */ @@ -6011,18 +6617,36 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) /* Disable all interrupts */ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + /* If state is an abort treatment on going, don't change state */ /* This change will be do later */ if (hi2c->State != HAL_I2C_STATE_ABORT) { /* Set HAL_I2C_STATE_READY */ hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + } hi2c->XferISR = NULL; } /* Abort DMA TX transfer if any */ tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) { @@ -6197,6 +6821,7 @@ static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) } } + /** * @brief DMA I2C slave transmit process complete callback. * @param hdma DMA handle @@ -6225,6 +6850,7 @@ static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) } } + /** * @brief DMA I2C master receive process complete callback. * @param hdma DMA handle @@ -6253,7 +6879,15 @@ static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) /* Set the XferSize to transfer */ if (hi2c->XferCount > MAX_NBYTE_SIZE) { - hi2c->XferSize = MAX_NBYTE_SIZE; + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } } else { @@ -6275,6 +6909,7 @@ static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) } } + /** * @brief DMA I2C slave receive process complete callback. * @param hdma DMA handle @@ -6286,7 +6921,7 @@ static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); uint32_t tmpoptions = hi2c->XferOptions; - if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ (tmpoptions != I2C_NO_OPTION_FRAME)) { /* Disable DMA Request */ @@ -6303,6 +6938,7 @@ static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) } } + /** * @brief DMA I2C communication error callback. * @param hdma DMA handle @@ -6320,6 +6956,7 @@ static void I2C_DMAError(DMA_HandleTypeDef *hdma) I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); } + /** * @brief DMA I2C communication abort callback * (To be called at end of DMA Abort procedure). @@ -6344,12 +6981,14 @@ static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) I2C_TreatErrorCallback(hi2c); } + /** - * @brief This function handles I2C Communication Timeout. + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param Flag Specifies the I2C flag to check. - * @param Status The new Flag status (SET or RESET). + * @param Status The actual Flag status (SET or RESET). * @param Timeout Timeout duration * @param Tickstart Tick start value * @retval HAL status @@ -6359,18 +6998,27 @@ static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uin { while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Check for the Timeout */ if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } } } } @@ -6390,8 +7038,8 @@ static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, { while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) { return HAL_ERROR; } @@ -6401,14 +7049,17 @@ static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, { if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); - return HAL_ERROR; + return HAL_ERROR; + } } } } @@ -6428,8 +7079,8 @@ static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, { while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) { return HAL_ERROR; } @@ -6437,14 +7088,17 @@ static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, /* Check for the Timeout */ if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); - return HAL_ERROR; + return HAL_ERROR; + } } } return HAL_OK; @@ -6461,16 +7115,18 @@ static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) { - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) { - return HAL_ERROR; + status = HAL_ERROR; } /* Check if a STOPF is detected */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) { /* Check if an RXNE is pending */ /* Store Last receive data if any */ @@ -6478,103 +7134,181 @@ static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, { /* Return HAL_OK */ /* The Reading of data from RXDR will be done in caller function */ - return HAL_OK; + status = HAL_OK; } - else + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + /* Clear STOP Flag */ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); /* Clear Configuration Register 2 */ I2C_RESET_CR2(hi2c); - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; hi2c->State = HAL_I2C_STATE_READY; hi2c->Mode = HAL_I2C_MODE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); - return HAL_ERROR; + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; } } /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); - return HAL_ERROR; + status = HAL_ERROR; + } } } - return HAL_OK; + return status; } /** - * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @brief This function handles errors detection during an I2C Communication. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2C. * @param Timeout Timeout duration * @param Tickstart Tick start value * @retval HAL status */ -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) { - /* In case of Soft End condition, generate the STOP condition */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - /* Wait until STOP Flag is reset */ + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ /* AutoEnd should be initiate after AF */ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) { /* Check for the Timeout */ if (Timeout != HAL_MAX_DELAY) { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; - return HAL_ERROR; + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } } } } - /* Clear NACKF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { /* Flush TX register */ I2C_Flush_TXDR(hi2c); /* Clear Configuration Register 2 */ I2C_RESET_CR2(hi2c); - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + hi2c->ErrorCode |= error_code; hi2c->State = HAL_I2C_STATE_READY; hi2c->Mode = HAL_I2C_MODE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); - - return HAL_ERROR; } - return HAL_OK; + + return status; } /** @@ -6604,14 +7338,16 @@ static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uin assert_param(IS_TRANSFER_MODE(Mode)); assert_param(IS_TRANSFER_REQUEST(Request)); + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + /* update CR2 register */ - MODIFY_REG(hi2c->Instance->CR2, + MODIFY_REG(hi2c->Instance->CR2, \ ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ - I2C_CR2_START | I2C_CR2_STOP)), \ - (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ - (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ - (uint32_t)Mode | (uint32_t)Request)); + I2C_CR2_START | I2C_CR2_STOP)), tmp); } /** @@ -6625,8 +7361,9 @@ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) { uint32_t tmpisr = 0U; - if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ - (hi2c->XferISR == I2C_Slave_ISR_DMA)) + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) { if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) { @@ -6634,6 +7371,18 @@ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; } + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + if (InterruptRequest == I2C_XFER_ERROR_IT) { /* Enable ERR and NACK interrupts */ @@ -6643,39 +7392,46 @@ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) if (InterruptRequest == I2C_XFER_CPLT_IT) { /* Enable STOP interrupts */ - tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); - } - - if (InterruptRequest == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; + tmpisr |= I2C_IT_STOPI; } } + else { if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) { - /* Enable ERR, STOP, NACK, and ADDR interrupts */ + /* Enable ERR, STOP, NACK and ADDR interrupts */ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; } if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) { - /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; } if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) { - /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; } + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + if (InterruptRequest == I2C_XFER_CPLT_IT) { /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; } } @@ -6790,5 +7546,3 @@ static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) /** * @} */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c index 90004090..d4c72b7d 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c @@ -9,6 +9,17 @@ * + WakeUp Mode Functions * + FastModePlus Functions * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### I2C peripheral Extended features ##### @@ -34,18 +45,6 @@ (++) HAL_I2CEx_EnableFastModePlus() (++) HAL_I2CEx_DisableFastModePlus() @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -361,5 +360,3 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) /** * @} */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c index 435b265e..fc305d08 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c @@ -8,17 +8,15 @@ * + Initialization/de-initialization function * + Peripheral Control function * - @verbatim ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -450,5 +448,3 @@ void HAL_PWR_DisableSEVOnPend(void) /** * @} */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c index c9b16dc4..a78e472f 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c @@ -11,13 +11,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -270,5 +269,3 @@ __weak void HAL_PWREx_Vddio2MonitorCallback(void) /** * @} */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c index f5e477e5..e03de99c 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c @@ -48,14 +48,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -1023,7 +1021,10 @@ void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_M assert_param(IS_RCC_MCO(RCC_MCOx)); assert_param(IS_RCC_MCODIV(RCC_MCODiv)); assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - + + /* Prevent unused argument(s) compilation warning */ + UNUSED(RCC_MCOx); + /* Configure the MCO1 pin in alternate function mode */ gpio.Mode = GPIO_MODE_AF_PP; gpio.Speed = GPIO_SPEED_FREQ_HIGH; @@ -1096,10 +1097,10 @@ void HAL_RCC_DisableCSS(void) */ uint32_t HAL_RCC_GetSysClockFreq(void) { - const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, - 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; - const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, - 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; + static const uint8_t aPLLMULFactorTable[16U] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, + 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; + static const uint8_t aPredivFactorTable[16U] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, + 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; uint32_t sysclockfreq = 0U; @@ -1362,4 +1363,3 @@ __weak void HAL_RCC_CSSCallback(void) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c index 6aee9035..068f8726 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c @@ -11,14 +11,12 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. ****************************************************************************** */ @@ -961,4 +959,3 @@ __weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c new file mode 100644 index 00000000..f7361be7 --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c @@ -0,0 +1,4448 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + uint32_t spi_cr1; + uint32_t spi_cr2; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + + errorcode = HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + errorcode = HAL_ERROR; + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + +#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6)|| defined (STM32F038xx) || defined (STM32F051x8) || defined (STM32F058xx) + /* Packing mode management is enabled by the DMA settings */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Restriction the DMA data received is not allowed in this mode */ + errorcode = HAL_ERROR; + goto error; + } +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F058xx */ + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + +#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6) || defined (STM32F038xx) || defined (STM32F051x8) || defined (STM32F058xx) + /* Packing mode management is enabled by the DMA settings */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Restriction the DMA data received is not allowed in this mode */ + errorcode = HAL_ERROR; + goto error; + } +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F058xx */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Flush Data Register by a blank read */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c new file mode 100644 index 00000000..bf7f5b0d --- /dev/null +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c @@ -0,0 +1,112 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c index e9e8ff3a..14808f12 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c @@ -29,6 +29,17 @@ * + Commutation Event configuration with Interruption and DMA * + TIM OCRef clear configuration * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### TIMER Generic features ##### @@ -169,17 +180,6 @@ all interrupt callbacks are set to the corresponding weak functions: @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -204,9 +204,9 @@ all interrupt callbacks are set to the corresponding weak functions: /** @addtogroup TIM_Private_Functions * @{ */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); @@ -222,7 +222,7 @@ static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig); + const TIM_SlaveConfigTypeDef *sSlaveConfig); /** * @} */ @@ -275,6 +275,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) assert_param(IS_TIM_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); if (htim->State == HAL_TIM_STATE_RESET) @@ -522,7 +523,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) * @param Length The length of data to be transferred from memory to peripheral. * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) { uint32_t tmpsmcr; @@ -536,7 +537,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat } else if (htim->State == HAL_TIM_STATE_READY) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -658,6 +659,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) assert_param(IS_TIM_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); if (htim->State == HAL_TIM_STATE_RESET) @@ -1043,7 +1045,8 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -1058,7 +1061,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -1321,6 +1324,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) assert_param(IS_TIM_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); if (htim->State == HAL_TIM_STATE_RESET) @@ -1706,7 +1710,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -1721,7 +1726,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe } else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -1983,6 +1988,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) assert_param(IS_TIM_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); if (htim->State == HAL_TIM_STATE_RESET) @@ -2376,7 +2382,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -2632,6 +2638,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePul assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); if (htim->State == HAL_TIM_STATE_RESET) @@ -3009,7 +3016,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out * @param sConfig TIM Encoder Interface configuration structure * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) { uint32_t tmpsmcr; uint32_t tmpccmr1; @@ -3035,6 +3042,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); if (htim->State == HAL_TIM_STATE_RESET) { @@ -3544,7 +3552,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) { - if ((pData1 == NULL) && (Length > 0U)) + if ((pData1 == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -3569,7 +3577,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) { - if ((pData2 == NULL) && (Length > 0U)) + if ((pData2 == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -3598,7 +3606,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) { - if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) { return HAL_ERROR; } @@ -3814,13 +3822,16 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Cha */ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) { + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + /* Capture compare 1 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) { { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; /* Input capture event */ @@ -3848,11 +3859,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* Capture compare 2 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; /* Input capture event */ if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) @@ -3878,11 +3889,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* Capture compare 3 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; /* Input capture event */ if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) @@ -3908,11 +3919,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* Capture compare 4 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; /* Input capture event */ if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) @@ -3938,11 +3949,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* TIM Update event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->PeriodElapsedCallback(htim); #else @@ -3951,11 +3962,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* TIM Break input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + if ((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK); #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->BreakCallback(htim); #else @@ -3964,11 +3975,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* TIM Trigger detection event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->TriggerCallback(htim); #else @@ -3977,11 +3988,11 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) } } /* TIM commutation event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->CommutationCallback(htim); #else @@ -4028,7 +4039,7 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, + const TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; @@ -4106,7 +4117,7 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; @@ -4206,7 +4217,7 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, + const TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; @@ -4468,15 +4479,14 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) { - HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); - if (status == HAL_OK) - { - status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - } return status; @@ -4522,7 +4532,7 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength) { HAL_StatusTypeDef status = HAL_OK; @@ -4809,13 +4819,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { - HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); - if (status == HAL_OK) - { - status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - } return status; } @@ -5164,7 +5172,7 @@ HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventS * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - TIM_ClearInputConfigTypeDef *sClearInputConfig, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; @@ -5190,8 +5198,8 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, { /* Clear the OCREF clear selection bit */ CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; } - break; case TIM_CLEARINPUTSOURCE_ETR: { @@ -5302,7 +5310,7 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, * contains the clock source information for the TIM peripheral. * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -5488,7 +5496,7 @@ HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_S * (Disable, Reset, Gated, Trigger, External clock mode 1). * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) { /* Check the parameters */ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); @@ -5529,7 +5537,7 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveC * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) + const TIM_SlaveConfigTypeDef *sSlaveConfig) { /* Check the parameters */ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); @@ -5571,7 +5579,7 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval Captured value */ -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) { uint32_t tmpreg = 0U; @@ -5845,8 +5853,6 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call { return HAL_ERROR; } - /* Process locked */ - __HAL_LOCK(htim); if (htim->State == HAL_TIM_STATE_READY) { @@ -6038,9 +6044,6 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(htim); - return status; } @@ -6083,9 +6086,6 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ - __HAL_LOCK(htim); - if (htim->State == HAL_TIM_STATE_READY) { switch (CallbackID) @@ -6317,9 +6317,6 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(htim); - return status; } #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ @@ -6348,7 +6345,7 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca * @param htim TIM Base handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6358,7 +6355,7 @@ HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) * @param htim TIM Output Compare handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6368,7 +6365,7 @@ HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) * @param htim TIM handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6378,7 +6375,7 @@ HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) * @param htim TIM IC handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6388,7 +6385,7 @@ HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) * @param htim TIM OPM handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6398,7 +6395,7 @@ HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) * @param htim TIM Encoder Interface handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -6408,7 +6405,7 @@ HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) * @param htim TIM handle * @retval Active channel */ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) { return htim->Channel; } @@ -6426,7 +6423,7 @@ HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) * @arg TIM_CHANNEL_6: TIM Channel 6 * @retval TIM Channel state */ -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) { HAL_TIM_ChannelStateTypeDef channel_state; @@ -6443,7 +6440,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, ui * @param htim TIM handle * @retval DMA burst state */ -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) { /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); @@ -6786,7 +6783,7 @@ static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) * @param Structure TIM Base configuration structure * @retval None */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) { uint32_t tmpcr1; tmpcr1 = TIMx->CR1; @@ -6826,6 +6823,13 @@ void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) /* Generate an update event to reload the Prescaler and the repetition counter (only for advanced timer) value immediately */ TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } } /** @@ -6834,17 +6838,18 @@ void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) * @param OC_Config The output configuration structure * @retval None */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) { uint32_t tmpccmrx; uint32_t tmpccer; uint32_t tmpcr2; + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Disable the Channel 1: Reset the CC1E Bit */ TIMx->CCER &= ~TIM_CCER_CC1E; - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; /* Get the TIMx CR2 register value */ tmpcr2 = TIMx->CR2; @@ -6909,17 +6914,18 @@ static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) * @param OC_Config The output configuration structure * @retval None */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) { uint32_t tmpccmrx; uint32_t tmpccer; uint32_t tmpcr2; + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Disable the Channel 2: Reset the CC2E Bit */ TIMx->CCER &= ~TIM_CCER_CC2E; - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; /* Get the TIMx CR2 register value */ tmpcr2 = TIMx->CR2; @@ -6948,7 +6954,6 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) tmpccer |= (OC_Config->OCNPolarity << 4U); /* Reset the Output N State */ tmpccer &= ~TIM_CCER_CC2NE; - } if (IS_TIM_BREAK_INSTANCE(TIMx)) @@ -6985,17 +6990,18 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) * @param OC_Config The output configuration structure * @retval None */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) { uint32_t tmpccmrx; uint32_t tmpccer; uint32_t tmpcr2; + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Disable the Channel 3: Reset the CC2E Bit */ TIMx->CCER &= ~TIM_CCER_CC3E; - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; /* Get the TIMx CR2 register value */ tmpcr2 = TIMx->CR2; @@ -7059,17 +7065,18 @@ static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) * @param OC_Config The output configuration structure * @retval None */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) { uint32_t tmpccmrx; uint32_t tmpccer; uint32_t tmpcr2; + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Disable the Channel 4: Reset the CC4E Bit */ TIMx->CCER &= ~TIM_CCER_CC4E; - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; /* Get the TIMx CR2 register value */ tmpcr2 = TIMx->CR2; @@ -7120,7 +7127,7 @@ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) * @retval None */ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) + const TIM_SlaveConfigTypeDef *sSlaveConfig) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -7260,9 +7267,9 @@ void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ uint32_t tmpccer; /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; TIMx->CCER &= ~TIM_CCER_CC1E; tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; /* Select the Input */ if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) @@ -7350,9 +7357,9 @@ static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 uint32_t tmpccer; /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; TIMx->CCER &= ~TIM_CCER_CC2E; tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; /* Select the Input */ tmpccmr1 &= ~TIM_CCMR1_CC2S; @@ -7389,9 +7396,9 @@ static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t tmpccer; /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; TIMx->CCER &= ~TIM_CCER_CC2E; tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; /* Set the filter */ tmpccmr1 &= ~TIM_CCMR1_IC2F; @@ -7433,9 +7440,9 @@ static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 uint32_t tmpccer; /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; TIMx->CCER &= ~TIM_CCER_CC3E; tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; /* Select the Input */ tmpccmr2 &= ~TIM_CCMR2_CC3S; @@ -7481,9 +7488,9 @@ static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 uint32_t tmpccer; /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; TIMx->CCER &= ~TIM_CCER_CC4E; tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; /* Select the Input */ tmpccmr2 &= ~TIM_CCMR2_CC4S; @@ -7632,4 +7639,3 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim) /** * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c index b5219402..eb511923 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c @@ -11,6 +11,17 @@ * + Time Master and Slave synchronization configuration * + Time OCRef clear configuration * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### TIMER Extended features ##### @@ -65,17 +76,6 @@ @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -136,7 +136,7 @@ static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Cha * @param sConfig TIM Hall Sensor configuration structure * @retval HAL status */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) { TIM_OC_InitTypeDef OC_Config; @@ -152,6 +152,7 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSen assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); @@ -502,7 +503,7 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -835,7 +836,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe /* Disable the TIM Break interrupt (only if no more channel is active) */ tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) { __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); } @@ -867,7 +868,8 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -882,7 +884,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan } else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -1080,17 +1082,6 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chann (+) Stop the Complementary PWM and disable interrupts. (+) Start the Complementary PWM and enable DMA transfers. (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - @endverbatim * @{ */ @@ -1316,7 +1307,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann /* Disable the TIM Break interrupt (only if no more channel is active) */ tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) { __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); } @@ -1348,7 +1339,8 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) { HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; @@ -1363,7 +1355,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha } else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if ((pData == NULL) && (Length > 0U)) + if ((pData == NULL) || (Length == 0U)) { return HAL_ERROR; } @@ -1961,7 +1953,7 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint3 * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig) + const TIM_MasterConfigTypeDef *sMasterConfig) { uint32_t tmpcr2; uint32_t tmpsmcr; @@ -2022,7 +2014,7 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) { /* Keep this variable initialized to 0 as it is used to configure BDTR register */ uint32_t tmpbdtr = 0U; @@ -2075,11 +2067,12 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, */ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) { - __HAL_LOCK(htim); /* Check parameters */ assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + __HAL_LOCK(htim); + /* Set the Timer remapping configuration */ WRITE_REG(htim->Instance->OR, Remap); @@ -2109,7 +2102,7 @@ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) */ /** - * @brief Hall commutation changed callback in non-blocking mode + * @brief Commutation callback in non-blocking mode * @param htim TIM handle * @retval None */ @@ -2123,7 +2116,7 @@ __weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) */ } /** - * @brief Hall commutation changed half complete callback in non-blocking mode + * @brief Commutation half complete callback in non-blocking mode * @param htim TIM handle * @retval None */ @@ -2138,7 +2131,7 @@ __weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) } /** - * @brief Hall Break detection callback in non-blocking mode + * @brief Break detection callback in non-blocking mode * @param htim TIM handle * @retval None */ @@ -2175,7 +2168,7 @@ __weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) * @param htim TIM Hall Sensor handle * @retval HAL state */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) { return htim->State; } @@ -2190,7 +2183,7 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) * @arg TIM_CHANNEL_3: TIM Channel 3 * @retval TIM Complementary channel state */ -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) { HAL_TIM_ChannelStateTypeDef channel_state; @@ -2210,7 +2203,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, */ /* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIMEx Private Functions +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions * @{ */ @@ -2289,15 +2282,6 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); } } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } else { /* nothing to do */ @@ -2366,13 +2350,13 @@ static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Cha { uint32_t tmp; - tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ /* Reset the CCxNE Bit */ TIMx->CCER &= ~tmp; /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ } /** * @} @@ -2386,5 +2370,3 @@ static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Cha /** * @} */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c index bcea1f5b..c83d27d2 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c @@ -10,6 +10,17 @@ * + Peripheral Control functions * * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim =============================================================================== ##### How to use this driver ##### @@ -94,7 +105,7 @@ [..] Use function HAL_UART_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. + weak function. HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: @@ -116,10 +127,10 @@ [..] By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: + all callbacks are set to the corresponding weak functions: examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_UART_Init() + reset to the legacy weak functions in the HAL_UART_Init() and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). @@ -136,22 +147,11 @@ [..] When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. + and weak callbacks are used. @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -177,7 +177,7 @@ USART_CR1_OVER8)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ #define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\ - USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ #define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ @@ -191,8 +191,8 @@ /** @addtogroup UART_Private_Functions * @{ */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart); static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); @@ -330,15 +330,17 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) __HAL_UART_DISABLE(huart); - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) { - return HAL_ERROR; + UART_AdvFeatureConfig(huart); } - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) { - UART_AdvFeatureConfig(huart); + return HAL_ERROR; } /* In asynchronous mode, the following bits must be kept cleared: @@ -411,15 +413,17 @@ HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) __HAL_UART_DISABLE(huart); - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) { - return HAL_ERROR; + UART_AdvFeatureConfig(huart); } - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) { - UART_AdvFeatureConfig(huart); + return HAL_ERROR; } /* In half-duplex mode, the following bits must be kept cleared: @@ -512,15 +516,17 @@ HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLe __HAL_UART_DISABLE(huart); - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) { - return HAL_ERROR; + UART_AdvFeatureConfig(huart); } - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) { - UART_AdvFeatureConfig(huart); + return HAL_ERROR; } /* In LIN mode, the following bits must be kept cleared: @@ -609,15 +615,17 @@ HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Add __HAL_UART_DISABLE(huart); - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) { - return HAL_ERROR; + UART_AdvFeatureConfig(huart); } - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) { - UART_AdvFeatureConfig(huart); + return HAL_ERROR; } /* In multiprocessor mode, the following bits must be kept cleared: @@ -698,6 +706,7 @@ HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_RESET; huart->RxState = HAL_UART_STATE_RESET; huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; __HAL_UNLOCK(huart); @@ -737,7 +746,10 @@ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /** * @brief Register a User UART Callback - * To be used instead of the weak predefined callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID * @param huart uart handle * @param CallbackID ID of the callback to be registered * This parameter can be one of the following values: @@ -767,8 +779,6 @@ HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_ return HAL_ERROR; } - __HAL_LOCK(huart); - if (huart->gState == HAL_UART_STATE_READY) { switch (CallbackID) @@ -855,14 +865,15 @@ HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_ status = HAL_ERROR; } - __HAL_UNLOCK(huart); - return status; } /** * @brief Unregister an UART Callback * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID * @param huart uart handle * @param CallbackID ID of the callback to be unregistered * This parameter can be one of the following values: @@ -883,8 +894,6 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR { HAL_StatusTypeDef status = HAL_OK; - __HAL_LOCK(huart); - if (HAL_UART_STATE_READY == huart->gState) { switch (CallbackID) @@ -972,8 +981,6 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR status = HAL_ERROR; } - __HAL_UNLOCK(huart); - return status; } @@ -995,10 +1002,7 @@ HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pU return HAL_ERROR; } - /* Process locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) + if (huart->RxState == HAL_UART_STATE_READY) { huart->RxEventCallback = pCallback; } @@ -1009,9 +1013,6 @@ HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pU status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(huart); - return status; } @@ -1025,10 +1026,7 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) + if (huart->RxState == HAL_UART_STATE_READY) { huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ } @@ -1039,8 +1037,6 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) status = HAL_ERROR; } - /* Release Lock */ - __HAL_UNLOCK(huart); return status; } @@ -1150,10 +1146,10 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) * @param Timeout Timeout duration. * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) { - uint8_t *pdata8bits; - uint16_t *pdata16bits; + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; uint32_t tickstart; /* Check that a Tx process is not already ongoing */ @@ -1175,8 +1171,6 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u } } - __HAL_LOCK(huart); - huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_BUSY_TX; @@ -1190,7 +1184,7 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) { pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; + pdata16bits = (const uint16_t *) pData; } else { @@ -1198,12 +1192,13 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u pdata16bits = NULL; } - __HAL_UNLOCK(huart); - while (huart->TxXferCount > 0U) { if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) { + + huart->gState = HAL_UART_STATE_READY; + return HAL_TIMEOUT; } if (pdata8bits == NULL) @@ -1221,6 +1216,8 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) { + huart->gState = HAL_UART_STATE_READY; + return HAL_TIMEOUT; } @@ -1277,8 +1274,6 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui } } - __HAL_LOCK(huart); - huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; @@ -1305,13 +1300,13 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui pdata16bits = NULL; } - __HAL_UNLOCK(huart); - /* as long as data have to be received */ while (huart->RxXferCount > 0U) { if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) { + huart->RxState = HAL_UART_STATE_READY; + return HAL_TIMEOUT; } if (pdata8bits == NULL) @@ -1353,7 +1348,7 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if (huart->gState == HAL_UART_STATE_READY) @@ -1374,8 +1369,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData } } - __HAL_LOCK(huart); - huart->pTxBuffPtr = pData; huart->TxXferSize = Size; huart->TxXferCount = Size; @@ -1394,8 +1387,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData huart->TxISR = UART_TxISR_8BIT; } - __HAL_UNLOCK(huart); - /* Enable the Transmit Data Register Empty interrupt */ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); @@ -1443,8 +1434,6 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, } } - __HAL_LOCK(huart); - /* Set Reception type to Standard reception */ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; @@ -1478,7 +1467,7 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if (huart->gState == HAL_UART_STATE_READY) @@ -1499,8 +1488,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat } } - __HAL_LOCK(huart); - huart->pTxBuffPtr = pData; huart->TxXferSize = Size; huart->TxXferCount = Size; @@ -1528,8 +1515,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat /* Set error code to DMA */ huart->ErrorCode = HAL_UART_ERROR_DMA; - __HAL_UNLOCK(huart); - /* Restore huart->gState to ready */ huart->gState = HAL_UART_STATE_READY; @@ -1539,8 +1524,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat /* Clear the TC flag in the ICR register */ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); - __HAL_UNLOCK(huart); - /* Enable the DMA transfer for transmit request by setting the DMAT bit in the UART CR3 register */ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); @@ -1591,8 +1574,6 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData } } - __HAL_LOCK(huart); - /* Set Reception type to Standard reception */ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; @@ -1621,8 +1602,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) const HAL_UART_StateTypeDef gstate = huart->gState; const HAL_UART_StateTypeDef rxstate = huart->RxState; - __HAL_LOCK(huart); - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && (gstate == HAL_UART_STATE_BUSY_TX)) { @@ -1640,8 +1619,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); } - __HAL_UNLOCK(huart); - return HAL_OK; } @@ -1652,8 +1629,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) { - __HAL_LOCK(huart); - if (huart->gState == HAL_UART_STATE_BUSY_TX) { /* Enable the UART DMA Tx request */ @@ -1665,15 +1640,16 @@ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the UART DMA Rx request */ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); } - __HAL_UNLOCK(huart); - return HAL_OK; } @@ -1769,9 +1745,10 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } - /* Disable the UART DMA Tx request if enabled */ + /* Abort the UART DMA Tx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { + /* Disable the UART DMA Tx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ @@ -1794,9 +1771,10 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) } } - /* Disable the UART DMA Rx request if enabled */ + /* Abort the UART DMA Rx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { + /* Disable the UART DMA Rx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ @@ -1857,9 +1835,10 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) /* Disable TXEIE and TCIE interrupts */ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - /* Disable the UART DMA Tx request if enabled */ + /* Abort the UART DMA Tx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { + /* Disable the UART DMA Tx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ @@ -1916,9 +1895,10 @@ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } - /* Disable the UART DMA Rx request if enabled */ + /* Abort the UART DMA Rx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { + /* Disable the UART DMA Rx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ @@ -2016,7 +1996,7 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) } } - /* Disable the UART DMA Tx request if enabled */ + /* Abort the UART DMA Tx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { /* Disable DMA Tx at UART level */ @@ -2040,9 +2020,10 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) } } - /* Disable the UART DMA Rx request if enabled */ + /* Abort the UART DMA Rx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { + /* Disable the UART DMA Rx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ @@ -2122,9 +2103,10 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) /* Disable interrupts */ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - /* Disable the UART DMA Tx request if enabled */ + /* Abort the UART DMA Tx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { + /* Disable the UART DMA Tx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ @@ -2213,9 +2195,10 @@ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); } - /* Disable the UART DMA Rx request if enabled */ + /* Abort the UART DMA Rx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { + /* Disable the UART DMA Rx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ @@ -2392,9 +2375,10 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ UART_EndRxTransfer(huart); - /* Disable the UART DMA Rx request if enabled */ + /* Abort the UART DMA Rx channel if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { + /* Disable the UART DMA Rx request if enabled */ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel */ @@ -2496,6 +2480,11 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) /* Last bytes received, so no need as the abort is immediate */ (void)HAL_DMA_Abort(huart->hdmarx); } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx Event callback*/ huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); @@ -2529,6 +2518,11 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) huart->RxISR = NULL; ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx complete callback*/ huart->RxEventCallback(huart, nb_rx_data); @@ -2976,7 +2970,7 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) * the configuration information for the specified UART. * @retval HAL state */ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) { uint32_t temp1; uint32_t temp2; @@ -2992,7 +2986,7 @@ HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) * the configuration information for the specified UART. * @retval UART Error Code */ -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) { return huart->ErrorCode; } @@ -3115,7 +3109,7 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) /* USARTDIV must be greater than or equal to 0d16 */ if (pclk != 0U) { - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) { brrtemp = (uint16_t)(usartdiv & 0xFFF0U); @@ -3153,10 +3147,10 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) if (pclk != 0U) { /* USARTDIV must be greater than or equal to 0d16 */ - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) { - huart->Instance->BRR = usartdiv; + huart->Instance->BRR = (uint16_t)usartdiv; } else { @@ -3183,6 +3177,13 @@ void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) /* Check whether the set of advanced features to configure is properly set */ assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + /* if required, configure TX pin active level inversion */ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) { @@ -3204,13 +3205,6 @@ void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); } - /* if required, configure RX/TX pins swap */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) - { - assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); - } - /* if required, configure RX overrun detection disabling */ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) { @@ -3268,6 +3262,13 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) /* Wait until TEACK flag is set */ if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) { + /* Disable TXE interrupt for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE)); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + /* Timeout occurred */ return HAL_TIMEOUT; } @@ -3279,6 +3280,15 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) /* Wait until REACK flag is set */ if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + /* Timeout occurred */ return HAL_TIMEOUT; } @@ -3288,6 +3298,7 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; __HAL_UNLOCK(huart); @@ -3295,10 +3306,11 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) } /** - * @brief Handle UART Communication Timeout. + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. * @param huart UART handle. * @param Flag Specifies the UART flag to check - * @param Status Flag status (SET or RESET) + * @param Status The actual Flag status (SET or RESET) * @param Tickstart Tick start value * @param Timeout Timeout duration * @retval HAL status @@ -3314,33 +3326,39 @@ HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_ { if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) - interrupts for the interrupt process */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); return HAL_TIMEOUT; } - if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) { /* Clear Receiver Timeout flag*/ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) - interrupts for the interrupt process */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; huart->ErrorCode = HAL_UART_ERROR_RTO; /* Process Unlocked */ @@ -3391,10 +3409,15 @@ HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pDat huart->RxISR = UART_RxISR_8BIT; } - __HAL_UNLOCK(huart); - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE); + } return HAL_OK; } @@ -3437,18 +3460,18 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa /* Set error code to DMA */ huart->ErrorCode = HAL_UART_ERROR_DMA; - __HAL_UNLOCK(huart); - /* Restore huart->RxState to ready */ huart->RxState = HAL_UART_STATE_READY; return HAL_ERROR; } } - __HAL_UNLOCK(huart); /* Enable the UART Parity Error Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); @@ -3586,6 +3609,10 @@ static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) } } + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + /* Check current reception Mode : If Reception till IDLE event has been selected : use Rx Event callback */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) @@ -3620,6 +3647,10 @@ static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + /* Check current reception Mode : If Reception till IDLE event has been selected : use Rx Event callback */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) @@ -3907,7 +3938,7 @@ static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) */ static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) { - uint16_t *tmp; + const uint16_t *tmp; /* Check that a Tx process is ongoing */ if (huart->gState == HAL_UART_STATE_BUSY_TX) @@ -3922,7 +3953,7 @@ static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) } else { - tmp = (uint16_t *) huart->pTxBuffPtr; + tmp = (const uint16_t *) huart->pTxBuffPtr; huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); huart->pTxBuffPtr += 2U; huart->TxXferCount--; @@ -3989,6 +4020,16 @@ static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + /* Check current reception Mode : If Reception till IDLE event has been selected : */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) @@ -4004,6 +4045,7 @@ static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) /* Clear IDLE Flag */ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); } + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx Event callback*/ huart->RxEventCallback(huart, huart->RxXferSize); @@ -4068,6 +4110,16 @@ static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + /* Check current reception Mode : If Reception till IDLE event has been selected : */ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) @@ -4083,6 +4135,7 @@ static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) /* Clear IDLE Flag */ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); } + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) /*Call registered Rx Event callback*/ huart->RxEventCallback(huart, huart->RxXferSize); @@ -4125,4 +4178,3 @@ static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c index d23ef34d..7fc628b0 100644 --- a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c +++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c @@ -9,6 +9,17 @@ * + Peripheral Control functions * * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** @verbatim ============================================================================== ##### UART peripheral extended features ##### @@ -21,17 +32,6 @@ @endverbatim ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -195,15 +195,17 @@ HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) { - return HAL_ERROR; + UART_AdvFeatureConfig(huart); } - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) { - UART_AdvFeatureConfig(huart); + return HAL_ERROR; } /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ @@ -520,11 +522,10 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p } } - __HAL_LOCK(huart); - huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); @@ -548,8 +549,6 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p pdata16bits = NULL; } - __HAL_UNLOCK(huart); - /* Initialize output number of received elements */ *RxLen = 0U; @@ -566,6 +565,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p /* If Set, and data has already been received, this means Idle Event is valid : End reception */ if (*RxLen > 0U) { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; huart->RxState = HAL_UART_STATE_READY; return HAL_OK; @@ -636,7 +636,7 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *p */ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { - HAL_StatusTypeDef status; + HAL_StatusTypeDef status = HAL_OK; /* Check that a Rx process is not already ongoing */ if (huart->RxState == HAL_UART_STATE_READY) @@ -657,29 +657,24 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t } } - __HAL_LOCK(huart); - /* Set Reception type to reception till IDLE Event*/ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; - status = UART_Start_Receive_IT(huart, pData, Size); + (void)UART_Start_Receive_IT(huart, pData, Size); - /* Check Rx process has been successfully started */ - if (status == HAL_OK) + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) { - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - else - { - /* In case of errors already pending when reception is started, - Interrupts may have already been raised and lead to reception abortion. - (Overrun error for instance). - In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ - status = HAL_ERROR; - } + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; } return status; @@ -735,10 +730,9 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ } } - __HAL_LOCK(huart); - /* Set Reception type to reception till IDLE Event*/ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; status = UART_Start_Receive_DMA(huart, pData, Size); @@ -768,6 +762,36 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_ } } +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + /** * @} */ @@ -813,4 +837,3 @@ static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTy * @} */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleof072rb/STM32F072RBTX_FLASH.ld b/nucleof072rb/STM32F072RBTX_FLASH.ld index cac8bdc9..b512240c 100644 --- a/nucleof072rb/STM32F072RBTX_FLASH.ld +++ b/nucleof072rb/STM32F072RBTX_FLASH.ld @@ -22,7 +22,7 @@ ****************************************************************************** ** @attention ** -** Copyright (c) 2024 STMicroelectronics. +** Copyright (c) 2025 STMicroelectronics. ** All rights reserved. ** ** This software is licensed under terms that can be found in the LICENSE file @@ -51,6 +51,7 @@ MEMORY /* Sections */ SECTIONS { + /* The startup code into "FLASH" Rom type memory */ .isr_vector : { diff --git a/nucleof072rb/nucleof072rb.ioc b/nucleof072rb/nucleof072rb.ioc index f849e237..5b1fe62a 100644 --- a/nucleof072rb/nucleof072rb.ioc +++ b/nucleof072rb/nucleof072rb.ioc @@ -8,28 +8,36 @@ Mcu.CPN=STM32F072RBT6 Mcu.Family=STM32F0 Mcu.IP0=NVIC Mcu.IP1=RCC -Mcu.IP2=SYS -Mcu.IP3=USART2 -Mcu.IPNb=4 +Mcu.IP2=SPI1 +Mcu.IP3=SYS +Mcu.IP4=TIM1 +Mcu.IP5=USART2 +Mcu.IPNb=6 Mcu.Name=STM32F072R(8-B)Tx Mcu.Package=LQFP64 Mcu.Pin0=PC13 Mcu.Pin1=PC14-OSC32_IN -Mcu.Pin10=VP_SYS_VS_Systick +Mcu.Pin10=PA8 +Mcu.Pin11=PA13 +Mcu.Pin12=PA14 +Mcu.Pin13=PB3 +Mcu.Pin14=PB8 +Mcu.Pin15=VP_SYS_VS_Systick +Mcu.Pin16=VP_TIM1_VS_ClockSourceINT Mcu.Pin2=PC15-OSC32_OUT Mcu.Pin3=PF0-OSC_IN Mcu.Pin4=PF1-OSC_OUT Mcu.Pin5=PA2 Mcu.Pin6=PA3 Mcu.Pin7=PA5 -Mcu.Pin8=PA13 -Mcu.Pin9=PA14 -Mcu.PinsNb=11 +Mcu.Pin8=PA6 +Mcu.Pin9=PA7 +Mcu.PinsNb=17 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F072RBTx -MxCube.Version=6.3.0 -MxDb.Version=DB.6.0.30 +MxCube.Version=6.15.0 +MxDb.Version=DB.6.0.150 NVIC.ForceEnableDMAVector=true NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false @@ -69,6 +77,19 @@ PA5.GPIO_PuPd=GPIO_NOPULL PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW PA5.Locked=true PA5.Signal=GPIO_Output +PA6.Locked=true +PA6.Mode=Full_Duplex_Master +PA6.Signal=SPI1_MISO +PA7.Locked=true +PA7.Mode=Full_Duplex_Master +PA7.Signal=SPI1_MOSI +PA8.Locked=true +PA8.Signal=S_TIM1_CH1 +PB3.Locked=true +PB3.Mode=Full_Duplex_Master +PB3.Signal=SPI1_SCK +PB8.Locked=true +PB8.Signal=GPIO_Output PC13.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI PC13.GPIO_Label=B1 [Blue PushButton] PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING @@ -88,6 +109,7 @@ PF1-OSC_OUT.Signal=RCC_OSC_OUT PinOutPanel.RotationAngle=0 ProjectManager.AskForMigrate=true ProjectManager.BackupPrevious=false +ProjectManager.CompilerLinker=GCC ProjectManager.CompilerOptimize=6 ProjectManager.ComputerToolchain=false ProjectManager.CoupleFile=true @@ -95,7 +117,7 @@ ProjectManager.CustomerFirmwarePackage= ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32F072RBTx -ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.3 +ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.5 ProjectManager.FreePins=false ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 @@ -104,7 +126,7 @@ ProjectManager.LastFirmware=true ProjectManager.LibraryCopy=1 ProjectManager.MainLocation=Core/Src ProjectManager.NoMain=false -ProjectManager.PreviousToolchain= +ProjectManager.PreviousToolchain=STM32CubeIDE ProjectManager.ProjectBuild=false ProjectManager.ProjectFileName=nucleof072rb.ioc ProjectManager.ProjectName=nucleof072rb @@ -116,7 +138,7 @@ ProjectManager.ToolChainLocation= ProjectManager.UAScriptAfterPath= ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_SPI1_Init-SPI1-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true RCC.AHBFreq_Value=48000000 RCC.APB1Freq_Value=48000000 RCC.APB1TimFreq_Value=48000000 @@ -141,11 +163,27 @@ RCC.USART1Freq_Value=48000000 RCC.USART2Freq_Value=48000000 SH.GPXTI13.0=GPIO_EXTI13 SH.GPXTI13.ConfNb=1 +SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1 +SH.S_TIM1_CH1.ConfNb=1 +SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16 +SPI1.CalculateBaudRate=3.0 MBits/s +SPI1.DataSize=SPI_DATASIZE_8BIT +SPI1.Direction=SPI_DIRECTION_2LINES +SPI1.FirstBit=SPI_FIRSTBIT_MSB +SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate,DataSize,FirstBit +SPI1.Mode=SPI_MODE_MASTER +SPI1.VirtualType=VM_MASTER +TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1 +TIM1.IPParameters=Channel-PWM Generation1 CH1,Period,Prescaler +TIM1.Period=64000 +TIM1.Prescaler=14 USART2.IPParameters=VirtualMode,VirtualMode-Asynchronous USART2.VirtualMode=VM_ASYNC USART2.VirtualMode-Asynchronous=VM_ASYNC VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick +VP_TIM1_VS_ClockSourceINT.Mode=Internal +VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT board=NUCLEO-F072RB boardIOC=true isbadioc=false