-
Notifications
You must be signed in to change notification settings - Fork 21
VDR4Arch Installation (en_US)
VDR4Arch is a ready to use binary repository for Arch Linux. Our main goal is to follow as many rules of the Arch Linux DeveloperWiki as possible.
This installation guide assumes that you already followed the base installation guide from the Arch Linux-Wiki. If you don't have a running Arch Linux base installation, start here
After booting the system, we install vdr4arch-keyring first
# wget http://creimer.net/vdr4arch/repo/vdr4arch-keyring-20130219-1-any.pkg.tar.xz # pacman -U vdr4arch-keyring-20130219-1-any.pkg.tar.xz
and add the repository at the end of /etc/pacman.conf afterwards.
[vdr4arch] SigLevel = PackageRequired Server = http://creimer.net/vdr4arch/repos/stable
Then we update the local package database
# pacman -Sy
This command
# pacman -Sl vdr4arch
lists the available packages.
For more details see the Packetlist
Isn't the X server already started differently we can use xlogin.
# pacman -S xlogin
The xlogin service has to be activated with the following command:
# systemctl enable xlogin@vdr
First must the driver be installed:
pacman -S xf86-video-intel
Afterwards must the X-Server be configured for use with VDR. The following new configuration file is needed:
Section "Monitor"
Identifier "HDMI1"
Modeline "1920x1080_24" 74.230 1920 2560 2604 2752 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
To make sound working, we have to set the default ALSA output device in /etc/asound.conf
For Intel this config should work.
pcm.!default {
type hw
card PCH
device 7
}
If sound still doesn't work, it's helpful to take a look at the device list.
For this we need alsa-utils
# pacman -S alsa-utils
The list of sound devices can be get with the following command:
# aplay -l
**** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: '''PCH''' [HDA Intel PCH], '''device 7''': HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0
With newer driver versions Intel got these ugly weathered colors. To fix this we need to install xorg-xrandr
pacman -S xorg-xrandr
and add or edit the file /home/vdr/.xinitrc
#!/usr/bin/bash xrandr --output HDMI1 --set "Broadcast RGB" "Full"
First must the driver be installed:
pacman -S nvidia
Afterwards must the X-Server be configured for use with VDR. The following new configuration file is needed:
Section "Monitor"
Identifier "HDMI1"
Modeline "1920x1080_24" 74.230 1920 2560 2604 2752 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
In rare occasions this file has to be expanded:
Option "DPI" "100x100"
Option "UseEdidDpi" "False"
For screens with wrong DPI data
Option "CustomEDID" "DFP-0:/etc/X11/edid.bin"
The above line loads a custom edid
The edid file can be generated with the following commands:
# X -verbose 6 > /tmp/xlog 2>&1
The above command has to be terminated with Ctrl-C after about 5 seconds. Finally run the following command:
# nvidia-xconfig --extract-edids-from-file=/tmp/xlog --extract-edids-output-file=/etc/X11/edid.bin
To make sound working, we have to set the default ALSA output device in /etc/asound.conf
In case of an nVidia graphic card this configuration should work:
pcm.!default {
type hw
card NVidia
device 7
}
If sound still doesn't work, it's helpful to take a look at the device list.
For this we need alsa-utils
# pacman -S alsa-utils
The list of sound devices can be get with the following command:
# aplay -l
**** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: '''NVidia''' [HDA NVidia], '''device 7''': HDMI 1 [HDMI 1] Subdevices: 0/1 Subdevice #0: subdevice #0
# pacman -S vdr-softhddevice
And activate it with a corresponding symlink.
# cd /etc/vdr/conf.d # ln -s ../conf.avail/50-softhddevice.conf .
# pacman -S vdr-xineliboutput xineliboutput-frontends
And activate it with a corresponding symlink.
# cd /etc/vdr/conf.d # ln -s ../conf.avail/50-xineliboutput.conf .
Set --local=sxfe (or --local=fbfe) and --remote=none in /etc/vdr/conf.d/50-xineliboutput.conf
# pacman -S vdr-xineliboutput
And activate it with a corresponding symlink.
# cd /etc/vdr/conf.d # ln -s ../conf.avail/50-xineliboutput.conf .
Set --local=none and --remote=3789 in /etc/vdr/conf.d/50-xineliboutput.conf
Install Xineliboutput frontends
# pacman -S xineliboutput-frontends
To start vdr-sxfe frontend run:
# vdr-sxfe <IP address of the server>
To start vdr-fbfe frontend run:
# vdr-fbfe <IP address of the server>
# pacman -S vdr
(vdr-dvbsddevice and vdr-dvbhddevice are part of the vdr package)
Create a symlink to the configuration file:
# cd /etc/vdr/conf.d # ln -s ../conf.avail/50-dvbhddevice.conf .
or for SD devices
# ln -s ../conf.avail/50-dvbsddevice.conf .
The driver for the Technotrend S2-6400 has to be installed
# pacman -S v4l-dvb-saa716x
and loaded with
# modprobe saa716x_ff
When the system is restarted, udev will load the driver automatically.
The configuration of vdr is located in /etc/vdr/conf.avail and /etc/vdr/conf.d Configuration for the VDR core can be found in /etc/vdr/conf.d/10-vdr.conf
Plugins place their configuration in /etc/vdr/conf.avail. To activate a plugin, a symlink has to be made to /etc/vdr/conf.d Plugins are loaded in alphabetical order.
To be able to control VDR with the keyboard, the following configuration file has to be created: /etc/systemd/system/vdr.service.d/fullfeatured.conf
[Service] StandardInput=tty TTYPath=/dev/tty8 ExecStartPre=/usr/bin/chvt 8
Enable autostart of VDR:
# systemctl enable vdr
Start VDR:
# systemctl start vdr
In case a plugin is not able to wait for for the network to be available, the following has to be altered:
In /etc/systemd/system/multi-user.target.wants/vdr.service.d the file 01-wait-for-net.conf has to be created:
# mkdir -p /etc/systemd/system/multi-user.target.wants/vdr.service.d # nano /etc/systemd/system/multi-user.target.wants/vdr.service.d/01-wait-for-net.conf
[Unit] After=network-online.target Wants=network-online.target
Additionally we have to edit the network configuration. Not all network handling daemons are able to detect if there's actually a working network connection. And as a result of that network-online.target doesn't always work as expected.
It's known to work with systemd-networkd and NetworkManager
Therefore it's recommended to use systemd-networkd. There's a really good documentation over at the Arch Wiki
Additionally a special daemon needs to be enabled.
systemctl enable systemd-networkd-wait-online
For NetworkManager it is
systemctl enable NetworkManager-wait-online
Usually systemd handles the powerbutton. Systemd triggers the shutdown if someone presses the powerbutton. Normally this is no big deal, but in case of vdr it is. VDR is only able to save the wakeup timer, if it also triggered the shutdown.
In case VDR triggers the shutdown: /usr/lib/vdr/bin/shutdown.sh gets started, it sets the wakeup timer and finally triggers the system shutdown. In case systemd triggers the shutdown: VDR receives a SIGTERM and terminates. Systemd continues the shutdown process (No wakeup timer was set)
vdrpbd inhibits systemd to take care of the powerbutton. Instead vdrpbd waits for the powerbutton event and tells VDR over svdrpsen, that the powerbutton was pressed.
To install vdrpbd:
# pacman -S vdrpbd
To enable vdrpbd:
# systemctl enable vdrpbd # systemctl start vdrpbd
[vdr4arch] SigLevel = PackageRequired Server = http://creimer.net/vdr4arch/repos/stable
At first. Remove
[vdr4arch-next] SigLevel = PackageRequired Server = http://creimer.net/vdr4arch/repos/next
from /etc/pacman.conf
To start the actual downgrading process:
pacman -Syuu (pay attention to the second "u")
You need a running Arch Linux base installation on a virtual machine.
Install the developement environment
# pacman -S base-devel
Install repo-make
# pacman -U http://downloads.tuxfamily.org/repomake/repo-make-1.0.0-1-any.pkg.tar.xz
Clone PKGBUILDs
# git clone https://github.com/CReimer/vdr4arch.git # cd vdr4arch
Start automatic build
# repo-make
All binary packages will land in the subdirectory "repo"