Motor Setup

Introduction

Glasscalibur includes a very important safety feature called CrushGuard and LockGuard.

LockGuard can detect your locked window and will automatically stop moving if your window is locked.

CrushGuard can detect when something gets in the way while closing thus protecting limbs and objects from being crushed.

Every window needs a different amount of force to move. Some windows might only need 5 lbs. while others need 30 lbs.

Glasscalibur will automatically figure out how much force your window needs to move and then set CrushGuard to stop based on that force.

These features require an initial calibration. Glasscalibur will open and close your window 5 times to learn how much force your window needs to operate.

Setup

Be sure your device is attached to your window and powered on.

WARNING: Be sure your window remains UNLOCKED during the entire duration of this operation.

Open your browser, enter the IP address of the device, and open the Settings tab.

Press the Auto Tune button and wait 5 minutes or so until the device stops moving.

It is now configured.