Read and edit the data drawings, BOMs and analyses are built from: every model dimension by name, measurements between faces, edges and vertices, materials, custom properties, and sheet-metal flat patterns.
Prerequisite: An active Part (or Assembly, for dimensions and measuring) document.
Total tools in this category: 8
List every dimension in the active part or assembly with its full name and value.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
feature_name |
str? |
— | null |
Only list this feature's dimensions, e.g. 'Boss-Extrude1'. Omit to list every dimension in the model. |
Sample call:
{}Measure faces, edges or vertices of the active model with SolidWorks' Measure tool.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
entities |
List[str] |
✅ | `` | One or two entities to measure. Each is 'face:x,y,z' (a point inside the face), 'edge:x,y,z', 'vertex:x,y,z', a bare 'x,y,z' (nearest edge) or a topology name like 'Edge<1>'. Coordinates are in metres. One face gives area/perimeter; one edge gives length/radius; two entities give distance and angle. |
Sample call:
{"entities": ["face:0,10,0", "face:0,0,0"]}Report the active part's material with its strength and stiffness, or any library material's.
Each property comes from the material's entry in its SolidWorks library, in SI units: elastic_modulus, poissons_ratio, shear_modulus, tensile_strength, yield_strength, compressive_strength, density, thermal_expansion, thermal_conductivity and specific_heat, each with value, unit and label. Strengths and moduli are in Pa: divide by 1e6 for MPa. A property the library doesn't hold for that material (ABS has no yield strength) is left out. Give material to read a library material without assigning it, for example to compare two before set_material; that needs no open document.
Prerequisite: An active part, unless material is given
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
configuration |
str? |
— | None |
Configuration; the active one when omitted |
material |
str? |
— | None |
A library material to read without assigning it, e.g. '6061-T6 (SS)'; omit for the active part's material |
database |
str? |
— | None |
The library to look in first for material; all of them when omitted |
Sample call:
{
"material": "6061-T6 (SS)"
}Returns (abridged):
{
"message": "Material: 6061-T6 (SS), E = 69 GPa",
"data": {
"material": "6061-T6 (SS)",
"source": "library",
"properties": {
"elastic_modulus": {"value": 69000000666.1, "unit": "Pa", "label": "Elastic modulus"},
"yield_strength": {"value": 275000000.9, "unit": "Pa", "label": "Yield strength"}
}
}
}Assign a library material to the active part, e.g. "AISI 1020" or "6061-T6 (SS)".
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
material_name |
str |
✅ | `` | Exact library name, e.g. 'AISI 1020', '6061-T6 (SS)', 'ABS'. Use list_available_materials to find it. |
database |
str? |
— | None |
Library; 'SOLIDWORKS Materials' when omitted |
configuration |
str? |
— | None |
Configuration; all configurations when omitted |
Sample call:
{
"material_name": "MCP_Demo_Part"
}List the materials in the installed SolidWorks material libraries.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
search |
str? |
— | null |
Case-insensitive filter on material name or classification, e.g. 'steel' or '6061' |
Sample call:
{}Read the active document's custom properties, such as PartNo, Description or Revision.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
configuration |
str? |
— | null |
Configuration-specific properties; file-level (what title blocks usually read) when omitted |
Sample call:
{}Create or overwrite one text custom property on the active document, e.g. PartNo or DrawnBy.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
name |
str |
✅ | `` | Property name, e.g. 'PartNo', 'Description', 'DrawnBy' |
value |
str |
✅ | `` | Text value; may be a $PRP:"SW-Mass" style link |
configuration |
str? |
— | None |
Configuration; file-level when omitted |
Sample call:
{"name": "PartNo", "value": "BR-001"}Export the active sheet-metal part's flat pattern to DXF or DWG, for laser or waterjet cutting.
Prerequisite: SolidWorks running
Parameters:
| Parameter | Type | Required | Default | Description |
|---|---|---|---|---|
file_path |
str |
✅ | `` | Output path ending in .dxf or .dwg |
Sample call:
{"file_path": "C:\\Temp\\mcp_demo\\bracket.dxf"}