Skip to content

Latest commit

 

History

History
84 lines (59 loc) · 3.8 KB

jack.md

File metadata and controls

84 lines (59 loc) · 3.8 KB

The jack backend

This backend provides read-write access to the JACK Audio Connection Kit low-latency audio transport server for the transport of control data via either JACK midi ports or control voltage (CV) inputs and outputs.

Global configuration

Option Example value Default value Description
debug on off Print info level notices from the JACK connection
errors on off Print error level notices from the JACK connection

Instance configuration

Option Example value Default value Description
name Controller MIDIMonster Client name for the JACK connection
server jackserver default JACK server identifier to connect to

Channels (corresponding to JACK ports) need to be configured with their type and, if applicable, value limits. To configure a port, specify it in the instance configuration using the following syntax:

port_name = <type> <direction> min <minimum> max <maximum>

Port names may be any string except for the instance configuration keywords name and server.

The following type values are currently supported:

  • midi: JACK MIDI port for transmitting MIDI event messages
  • cv: JACK audio port for transmitting DC offset "control voltage" samples (requires min/max configuration)

direction may be one of in or out, as seen from the perspective of the MIDIMonster core, thus in means data is being read from the JACK server and out transfers data into the JACK server.

The following example instance configuration would create a MIDI port sending data into JACK, a control voltage output sending data between -1 and 1, and a control voltage input receiving data with values between 0 and 10.

midi_out = midi out
cv_out = cv out min -1 max 1
cv_in = cv in min 0.0 max 10.0

Input CV samples outside the configured range will be clipped. The MIDIMonster will not generate output CV samples outside of the configured range.

Channel specification

CV ports are exposed as single MIDIMonster channel and directly map to their normalised values.

MIDI ports provide subchannels for the various MIDI controls available. Each MIDI port carries 16 MIDI channels (numbered 0 through 15), each of which has 128 note controls (numbered 0 through 127), corresponding pressure controls for each note, 128 control change (CC) controls (numbered likewise), one channel wide "aftertouch" control and one channel-wide pitchbend control.

A MIDI port subchannel is specified using the syntax channel<channel>.<type><index>. The shorthand ch may be used instead of the word channel (Note that channel here refers to the MIDI channel number).

The following values are recognized for type:

  • cc - Control Changes
  • note - Note On/Off messages
  • pressure - Note pressure/aftertouch messages
  • aftertouch - Channel-wide aftertouch messages
  • pitch - Channel pitchbend messages

The pitch and aftertouch events are channel-wide, thus they can be specified as channel<channel>.<type>.

Example mappings:

jack1.cv_in > jack1.midi_out.ch0.note3
jack1.midi_in.ch0.pitch > jack1.cv_out

The MIDI subchannel syntax is intentionally kept compatible to the different MIDI backends also supported by the MIDIMonster

Known bugs / problems

While JACK has rudimentary capabilities for transporting OSC messages, configuring and parsing such channels with this backend would take a great amount of dedicated syntax & code. CV ports can provide fine-grained single control channels as an alternative to MIDI. This feature may be implemented at some point in the future.