Skip to content

Latest commit

 

History

History
33 lines (25 loc) · 1.69 KB

README.md

File metadata and controls

33 lines (25 loc) · 1.69 KB

Panos2Grafana

Steps and configurations to create a complete PaloAlto Firewall dashboard in GRAFANA. The dashboard is compatible with one firewall or with a HA cluster of 2 firewalls.

This Dashboard is based in a model PA5250 so if you are using a different one, probably some of the sensor graphs (cpu_temp and fan_speed) can be inadequate, but the rest of the graphs should be ok.

Screenshot

screenshot

Getting Starting

Prerequisites

The infraestruture needed is:

  • PanOS 8.1 or greater firewall (obviously) ;-)
  • InfluxDB
  • Telegraf
  • Grafana

I am assuming that your PanOS Firewall is configured to answer SNMP queries and you have a InfluxDB, Telegraf and Grafana installed and configured property . I will not cover information about installation and basic configuration.

Telegraf

First, download pan-81-snmp-mib-modules.zip and uncompress all the files in /etc/telegraf/telegraf.d/.snmp/mibs/

We will collect data using Telegraf with the SNMP plugin. Just download panos_snmp.conf, modifies the agents and communities variables, copy the file in /etc/telegraf/telegraf.d/ and reload telegraf

sudo service telegraf reload

After some seconds, it's a good idea to check if everything is working

sudo service telegraf status

Grafana

Finally, you can import the Dashboard number 11321 from grafana.com