I'm implementing Prometheus remote write v2 (PRW2.0) based on PRW2.0 docs (https://prometheus.io/docs/specs/remote_write_spec_2_0).
There are two milestones:
Milestone1
The distributor can accept PRW2.0 requests. It requires small changes between the Distributor and Ingester, including adding response headers. The ingestion is done by converting the PRW2.0 request to PRW1.0, then using existing Push methods in the Distributor and Ingester.
push response headers to be added:
X-Prometheus-Remote-Write-Samples-Written <count of all successfully written Samples>
X-Prometheus-Remote-Write-Histograms-Written <count of all successfully written Histogram samples>
X-Prometheus-Remote-Write-Exemplars-Written <count of all successfully written Exemplars>
Milestone2
Add PRW2.0 proto and update the protocol used between the Distributor and Ingester.
I'm implementing Prometheus remote write v2 (PRW2.0) based on PRW2.0 docs (https://prometheus.io/docs/specs/remote_write_spec_2_0).
There are two milestones:
Milestone1
The distributor can accept PRW2.0 requests. It requires small changes between the Distributor and Ingester, including adding response headers. The ingestion is done by converting the PRW2.0 request to PRW1.0, then using existing
Pushmethods in the Distributor and Ingester.push response headers to be added:
Milestone2
Add PRW2.0 proto and update the protocol used between the Distributor and Ingester.