4_drag.md

Drag to teach

Trajectory recording and playback can be realized.

Python version drag and teach only supports Pi and Jetson Nano versions in 280, 270, 260, myArm 300 and 320 models.

Instructions：

• 1. Download Drag Teaching Python Code File
• 2. Copy the downloaded file to the robotic arm system.
• 3. Open the terminal and run the file:

    python drag_trial_teaching.py

  

  After the file is run:

  • 3.1 Select robot type
  • 3.2 Select robot port
  • 3.3 Enter the baud rate, the default is 1000000

    machine type	Serial number	baud rate
    270 PI	/dev/ttyAMA0	1000000
    280 PI	/dev/ttyAMA0	1000000
    320 PI	/dev/ttyAMA0	115200
    280 Jetson Nano	/dev/ttyTHS1	1000000
    260 PI	/dev/ttyAMA0	1000000
    myArm 300 PI	/dev/ttyAMA0	115200

  • 3.4 Choose whether debugging is required, debugging is not enabled by default
  • 3.5 Finally, enter the function selection list, and the function selection is realized through the keyboard keys:
    • q: quit
    • r: start recording, now you can start dragging the robotic arm
    • c: stop recording
    • p: (lowercase letters) play once
    • P: (uppercase letters) loop / stop playback
    • s: Save this recording information, it will save the recording information to the record.txt file in the same directory as drag_trial_teaching.py
    • l: will load the information in the record.txt file in the same directory as drag_trial_teaching.py
    • f: relax all joints of the robot arm

---

← Previous Page | Next Page →