x86/bugs: Use code segment selector for VERW operand

commit e4d2102 upstream.

Robert Gill reported below #GP in 32-bit mode when dosemu software was
executing vm86() system call:

  general protection fault: 0000 [#1] PREEMPT SMP
  CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1
  Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010
  EIP: restore_all_switch_stack+0xbe/0xcf
  EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
  ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc
  DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046
  CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0
  Call Trace:
   show_regs+0x70/0x78
   die_addr+0x29/0x70
   exc_general_protection+0x13c/0x348
   exc_bounds+0x98/0x98
   handle_exception+0x14d/0x14d
   exc_bounds+0x98/0x98
   restore_all_switch_stack+0xbe/0xcf
   exc_bounds+0x98/0x98
   restore_all_switch_stack+0xbe/0xcf

This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS
are enabled. This is because segment registers with an arbitrary user value
can result in #GP when executing VERW. Intel SDM vol. 2C documents the
following behavior for VERW instruction:

  #GP(0) - If a memory operand effective address is outside the CS, DS, ES,
	   FS, or GS segment limit.

CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user
space. Use %cs selector to reference VERW operand. This ensures VERW will
not #GP for an arbitrary user %ds.

[ mingo: Fixed the SOB chain. ]

Fixes: a0e2dab ("x86/entry_32: Add VERW just before userspace transition")
Reported-by: Robert Gill <[email protected]>
Reviewed-by: Andrew Cooper <[email protected]
Cc: [email protected] # 5.10+
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218707
Closes: https://lore.kernel.org/all/[email protected]/
Suggested-by: Dave Hansen <[email protected]>
Suggested-by: Brian Gerst <[email protected]>
Signed-off-by: Pawan Gupta <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: pa1gupta

arch/x86/include/asm/nospec-branch.h

@@ -332,7 +332,16 @@
  * Note: Only the memory operand variant of VERW clears the CPU buffers.
  */
 .macro CLEAR_CPU_BUFFERS
-	ALTERNATIVE "", __stringify(verw _ASM_RIP(mds_verw_sel)), X86_FEATURE_CLEAR_CPU_BUF
+#ifdef CONFIG_X86_64
+	ALTERNATIVE "", "verw mds_verw_sel(%rip)", X86_FEATURE_CLEAR_CPU_BUF
+#else
+	/*
+	 * In 32bit mode, the memory operand must be a %cs reference. The data
+	 * segments may not be usable (vm86 mode), and the stack segment may not
+	 * be flat (ESPFIX32).
+	 */
+	ALTERNATIVE "", "verw %cs:mds_verw_sel", X86_FEATURE_CLEAR_CPU_BUF
+#endif
 .endm
 
 #ifdef CONFIG_X86_64