Plug-In Battery firmware 1.0503 has been released as beta

[DCSBL]

New in Plug-In Battery version 1.0503

This update includes a firmware update for the inverter, which converts grid energy to battery storage. The inverter will be updated after the standard firmware update has completed.

Updated in the new inverter firmware

• We fixed a bug where the fans would briefly run at maximum power when the inverter was powered on.
• Removed the need to switch one of the relays during transitions between charging and discharging. This reduces noise and increases switching speed.

It is not possible to see which inverter firmware version is active.

Notes

• This is a follow-up of 1.0502, which was in beta last month, see 1.0502. 1.0503 also contains the fix applied in 1.0406.
• It is not possible to see which inverter firmware version is active. Because most beta-testers already had this update, we expect no real difference.

How to install

The update will be installed automatically. To check if your device has the latest version and to install it, follow these instructions: https://helpdesk.homewizard.com/en/articles/9167578-how-do-i-check-if-i-have-the-latest-software-on-my-homewizard-product. Your device must be signed up for the beta channel.

Feedback

Share your feedback below in English or Dutch during the beta period.

Feedback guidelines

We really appreciate your feedback! We read all comments and take them seriously. To help us prioritize and make it easier for you to contribute, please consider the following:

• If everything works as expected, give a thumbs up 👍 or a vote (↑) on the topic start. While we’re happy to hear that, comments stating that everything works smoothly make it harder to find and filter issue-related comments.
• Check if your issue has already been mentioned; if so, give it a vote (↑) and add a reaction if needed.
• Please try to keep this discussion on-topic. Feedback not related to this beta is better shared through other channels.

[jtebbens]

installed, waiting for 10min sync with grid

[jtebbens]

Works fine, almost full PIB so no issues detected

[Citypet]

Ik schrok even met E203, maar dat kwam omdat de P1 meter niet gekoppeld was. Na de koppeling alles weer oke.

[johnvanderster]

all 3 pibs installed, running fine

[Stef1971]

Staat op beide pibs sinds de update uit is, geen problemen gezien.

[PE7GL]

Ik kan de eerste 3 modes status terug lezen maar bij NOM Charge only en NOM discharge only wordt alleen de eerste mode NOM gemeld.
Nu moet ik in Homey extra flaggen setten om te onthouden in welke NOM mode de batterijen staan. Niet Handig!
Voor de rest is dit een leuke uitbreiding van de batterijen operatie modes

[Devke1972]

Binnen HA moet je ook een extra sensor aanmaken die aangeeft of je alleen mag laden / ontladen of beiden. Opzich is dat niet erg toch? Ik heb 2 sensoren. 1 met de permissies en de ander de modus waarin de batterij staat.

[PE7GL]

Ik heb het nu werkend. Met behulp van twee ja/nee variabelen. En verder moet ik om zeker te zijn van een trigger zet ik de batterijen eerst voor 2 seconden in stand-by en daarna set ik de ja/nee variabele voor de juiste mode en zet de p1 in de gevraagde mode.
Met deze werk wijzer werken de triggers nu goed en is de schermupdate correct.

[PE7GL]

Inmiddels de laatste versie van beide apps geladen en de batterijen werken prima op alle commando’s. De flows zijn aangepast in homey voor de laatste versie van de Homewizard app
Momenteel test charge only mode

[Lupindakaas]

Starting today, the battery firmware version 1.0503 will be made available for all devices in the coming weeks.