Skip to content

ESP32 Marauder Kit

Jump to bottom
Just Call Me Koko edited this page Jul 8, 2021 · 24 revisions

ESP32 Marauder Kit

ESP32 WROOM-32U

The ESP32 Marauder Kit is a bundle of hardware components that allow a user to assemble a fully functional ESP32 Marauder. All that is required from the user is that they must provide their own [Adafruit Huzzah32](https://www.adafruit.com/product/3405) flashed with the ESP32 Marauder firmware, and a 3.7V LiPo battery compatible with the Huzzah32.

Installing Firmware

To build the ESP32 Marauder firmware from source and install it on the Adafruit Huzzah32, follow the instructions under Installing Firmware.

Assembling Hardware

  1. Solder the male header pins included with your Adafruit Huzzah32 to the Huzzah32 board
  2. Connect the Huzzah32 to the ESP32 Marauder Kit PCB
  3. Connect your 3.7V LiPo battery to the JST connector of the Huzzah32
    • Note: Ensure the power switch of the ESP32 Marauder Kit PCB is in the off position
  4. Using some sort of adhesive such as double sided tape or glue, fix the 3.7V LiPo battery to the inside of the Marauder enclosure
  5. Using the 4 included M2.5 x 5mm screws, screw the ESP32 Marauder PCB to the enclosure so that the TFT Touch screen faces outward

ESP32 WROOM-32U ESP32 WROOM-32U

Clone this wiki locally