Wardrive
This function allows users to continuously scan for WiFi networks. Once a network is detected, the current position from the attached GPS module along with the network information is logged and saved to a file with "wardrive" prefix to SD card. To exit the scan, simply tap the screen. Because of the method of scanning, it may take multiple taps to exit. This function requires the GPS Modification.
During the scan, network information is only saved to the log file as long as the GPS has a valid fix which can change at any point during the scan depending on location, weather, and antenna.
This function is available for use via the Marauder CLI. The following documentation describes command usage. The wardrive function can be stopped with stopscan.
wardrive
Logs are saved to the onboard SD card or to the Flipper SD card (if you have the serial firmware installed) with the prefix "wardrive_". These files can be uploaded to wigle.net and will count towards your personal stats.