MQTTClient_Basic_LAN8720.ino

/****************************************************************************************************************************
  MQTTClient_Basic_LAN8720.ino - Dead simple AsyncWebServer for STM32 LAN8720 or built-in LAN8742A Ethernet
  
  For STM32 with LAN8720 (STM32F4/F7) or built-in LAN8742A Ethernet (Nucleo-144, DISCOVERY, etc)
  
  AsyncWebServer_STM32 is a library for the STM32 with LAN8720 or built-in LAN8742A Ethernet WebServer
  
  Based on and modified from ESPAsyncWebServer (https://github.com/me-no-dev/ESPAsyncWebServer)
  Built by Khoi Hoang https://github.com/khoih-prog/AsyncWebServer_STM32
  Licensed under MIT license
 *****************************************************************************************************************************/

/*
   Currently support
   1) STM32 boards with built-in Ethernet (to use USE_BUILTIN_ETHERNET = true) such as :
      - Nucleo-144 (F429ZI, F767ZI)
      - Discovery (STM32F746G-DISCOVERY)
      - STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash, with Built-in Ethernet, 
      - See How To Use Built-in Ethernet at (https://github.com/khoih-prog/EthernetWebServer_STM32/issues/1)
   2) STM32F/L/H/G/WB/MP1 boards (with 64+K Flash) running ENC28J60 shields (to use USE_BUILTIN_ETHERNET = false)
   3) STM32F/L/H/G/WB/MP1 boards (with 64+K Flash) running W5x00 shields
   4) STM32F4 and STM32F7 boards (with 64+K Flash) running LAN8720 shields
*/

/*
  Basic MQTT example (without SSL!) with Authentication
  This sketch demonstrates the basic capabilities of the library.
  It connects to an MQTT server then:
  - providing username and password
  - publishes "hello world" to the topic "outTopic"
  - subscribes to the topic "inTopic", printing out any messages
    it receives. NB - it assumes the received payloads are strings not binary
    
  It will reconnect to the server if the connection is lost using a blocking
  reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to
  achieve the same result without blocking the main loop.
*/

// To remove boolean warnings caused by PubSubClient library
#define boolean     bool

#include "defines.h"

#include <PubSubClient.h>

// Update these with values suitable for your network.
const char* mqttServer = "broker.emqx.io";        // Broker address

const char *ID        = "MQTTClient_SSL-Client";  // Name of our device, must be unique
const char *TOPIC     = "MQTT_Pub";               // Topic to subcribe to
const char *subTopic  = "MQTT_Sub";               // Topic to subcribe to

//IPAddress mqttServer(172, 16, 0, 2);

void callback(char* topic, byte* payload, unsigned int length) 
{
  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  
  for (unsigned int i = 0; i < length; i++) 
  {
    Serial.print((char)payload[i]);
  }
  
  Serial.println();
}

EthernetClient  ethClient;
PubSubClient    client(mqttServer, 1883, callback, ethClient);

String data         = "Hello from MQTTClient_Basic_LAN8720 on " + String(BOARD_NAME) + " with " + String(SHIELD_TYPE);
const char *pubData = data.c_str();

void reconnect()
{
  // Loop until we're reconnected
  while (!client.connected())
  {
    Serial.print("Attempting MQTT connection to ");
    Serial.print(mqttServer);

    // Attempt to connect
    if (client.connect(ID, "try", "try"))
    {
      Serial.println("...connected");
      
      // Once connected, publish an announcement...
      client.publish(TOPIC, data.c_str());

      //Serial.println("Published connection message successfully!");
      //Serial.print("Subcribed to: ");
      //Serial.println(subTopic);
      
      client.subscribe(subTopic);
      // for loopback testing
      client.subscribe(TOPIC);
    }
    else
    {
      Serial.print("...failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");

      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void setup()
{
  // Open serial communications and wait for port to open:
  Serial.begin(115200);
  delay(2000);

  Serial.print("\nStart MQTTClient_Basic_LAN8720 on "); Serial.print(BOARD_NAME);
  Serial.print(" with "); Serial.println(SHIELD_TYPE);
  Serial.println(ASYNC_WEBSERVER_STM32_VERSION);

#if (_ASYNCWEBSERVER_STM32_LOGLEVEL_ > 2)
  Serial.print("STM32 Core version v"); Serial.print(STM32_CORE_VERSION_MAJOR);
  Serial.print("."); Serial.print(STM32_CORE_VERSION_MINOR); 
  Serial.print("."); Serial.println(STM32_CORE_VERSION_PATCH);
#endif

  // start the ethernet connection and the server
  // Use random mac
  uint16_t index = millis() % NUMBER_OF_MAC;

  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  // Use DHCP dynamic IP and random mac
  Ethernet.begin(mac[index]);

  Serial.print("\nConnected to network. IP = ");
  Serial.println(Ethernet.localIP());

  client.setServer(mqttServer, 1883);
  client.setCallback(callback);

  // Allow the hardware to sort itself out
  delay(1500);
}

#define MQTT_PUBLISH_INTERVAL_MS       5000L

unsigned long lastMsg = 0;

void loop() 
{
  static unsigned long now;
  
  if (!client.connected()) 
  {
    reconnect();
  }

  // Sending Data
  now = millis();
  
  if (now - lastMsg > MQTT_PUBLISH_INTERVAL_MS)
  {
    lastMsg = now;

    if (!client.publish(TOPIC, pubData))
    {
      Serial.println("Message failed to send.");
    }

    Serial.print("Message Send : " + String(TOPIC) + " => ");
    Serial.println(data);
  }
  
  client.loop();
}