new pinout layout

Author: CsAngel-github

docs/02_Toolboxes/02_ElectronicsBox/01_automation_intro.md

@@ -54,12 +54,12 @@ find the Pin-layout for the **ESO32-DEV-based UC2 standalone board V4** [here](h
 ### Step 2: Flashing the ESP32 Firmware
 1. Before proceeding, ensure your ESP32 board has the latest firmware. You can download and flash the firmware via the official [openUC2 website](https://youseetoo.github.io/), selecting the your version, then then click on the connect button.
 
+
 <p align="center">
-  <img src="./IMAGES/EXP_1_Serial/Electronics_Box_5.png" width="1600"/>
-  <br />
-  <em>Flashing process shown for the ESP32-DEV-based UC2 standalone board V3 (beta).</em>
+<em>Flashing process shown for the ESP32-DEV-based UC2 standalone board V3 (beta).</em>
 </p>
 
+![](./IMAGES/Electronics_Box_5.png)
 
 The source-code can be found [here](https://github.com/youseetoo/uc2-esp32)
 

docs/04_Electronics/003_UC2StandaloneBoard/02_Board_Schematics_v4.md

@@ -29,10 +29,10 @@ We use the ESP32 in order to ensure connectivity via
 ![](./IMAGES/standalone-jacks-pinout_V04.jpg)
 
 ## connecting devices - max. configuration for Discovery line products
-- connect the LED-Matrix to the Mainboard at `LED1`
+- connect the LED-Matrix to the Mainboard at `LED1.
 - Connect the Z-stage to the position `Z-Motor` on the main board. Ensure there's a motor driver.
 - Connect the 3 Motors of the XYZ-Stage to the respective positions `A-Motor`, `X-Motor`, `Y-Motor`. Ensure there are motor drivers as well.
-- Connect the single fluorescence LED at `PMW2`
+- Connect the single fluorescence LED at `PMW2`.
 - Connect the single-color laser to the Mainboard at `XH 4-pin`or the dual-color laser at `XH 6-pin`. In the Webserial you control it with the PMW1 buttons
 - Plug in the USB-micro/USB-C at your ESP32 and connect to your PC.(USB-type depends on ESP32-type)
 - Plug in the 12V power cable.