Beginner Question on Examples in the Wiki

[frohro]

I can get the first example file below (from the Examples in the Ardunio IDE) to build, but I can't get any of the examples in the Introduction from the Wiki to build. The errors I get are different.

#include "AudioTools.h"
#include "AudioTools/Concurrency/RP2040.h"

BufferRP2040T<int> buffer(10, 20);  //20 blocks with 10 ints->100 ints

void setup() {
  Serial.begin(115200);
  AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Info);
  while (!Serial)
    ;
  delay(1000);
  Serial.println("testing...");

  assert(buffer.size() == 200);
  assert(buffer.available() == 0);
  assert(buffer.availableForWrite() == 200);
  for (int j = 0; j < 10; j++) {
    assert(buffer.write(j));
  }
  assert(buffer.size() == 200);
  assert(buffer.available() == 10);

  int tmp[20];
  assert(buffer.readArray(tmp, 20) == 10);

  for (int j = 0; j < 10; j++) {
    assert(tmp[j] == j);
  }

  assert(buffer.writeArray(tmp, 10) == 10);

  Serial.println("success!");
}

void loop() {
}

This example is from the "The Most Important Basics" on the Wiki here.

#include "AudioTools.h"

AudioInfo info(44100,2,16);
SineWaveGenerator<int16_t> sineWave(32000);                // subclass of SoundGenerator with max amplitude of 32000
GeneratedSoundStream<int16_t> in(sineWave);                // Stream generated from sine wave
CsvStream<int16_t> csv(Serial); 
VolumeStream volume(csv);
StreamCopy copier(volume, in);                             

// Arduino Setup
void setup(void) {  
  // Open Serial 
  Serial.begin(115200);
  AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Info);

  // Define CSV Output
  auto config = csv.defaultConfig();
  config.copyFrom(info);
  csv.begin(config);

  // setup volume
  auto config_vol = volume.defaultConfig();
  config_vol.copyFrom(info);
  config_vol.volume = 0.5;  // half the volume
  volume.begin(config_vol);

  // Setup sine wave
  sineWave.begin(info, N_B4);
}

void loop() {
  copier.copy();
}

Are the examples perhaps out of date? What am I missing?
Thanks,
Rob

[frohro]

I did some more poking around in the examples using the IDE instead of reading the Wiki. It appears that the examples need to reference the examples
Thank you, those are correct. :-)
Rob

[pschatzmann]

Where did you get the example from ?
CsvStream should be CsvOutput!

[frohro]

Search for CSVStream on this page.

[pschatzmann]

Thanks: I have updated the documentation...

[frohro]

And this page: https://github.com/pschatzmann/arduino-audio-tools/wiki/Design-Principles

[frohro]

And better check every page on the Wiki. I have to go to class. :-)