| layout | title |
|---|---|
documentation |
DSD31 - ZWave |
{% include base.html %}
This describes the Z-Wave device DSD31, manufactured by AEON Labs with the thing type UID of aeon_dsd31_00_000.
The device is in the category of Siren, defining Siren used by Alarm systems.
The DSD31 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the DSD31 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Switch | switch_binary | Switch | Switch |
| Siren sound and volume | config_decimal | Number |
Switch the power on and off.
The switch_binary channel supports the Switch item and is in the Switch category.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
The following table provides a summary of the 5 configuration parameters available in the DSD31. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 37 | Sirensound and Volume | Sets the sound type and volume |
| 37 | Siren Sound | |
| 37 | Siren Volume | |
| 80 | Send Notifications | send notifications to associated devices |
| 252 | Enable/Disable 'Lock' - Configuration |
Sets the sound type and volume The Value1(low byte) is used to select the Siren sound. The Value2(high byte) is used to adjust the volume. Other values will be ignored. 0 1 -> do not change the current sound.1 1 -> Siren sound 1 is selected.2 1 -> Siren sound 2 iThis is an advanced parameter and will therefore not show in the user interface without entering advanced mode. Values in the range 0 to 65535 may be set.
The manufacturer defined default value is 13.
This parameter has the configuration ID config_37_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Siren Sound 1 |
| 2 | Siren Sound 2 |
| 3 | Siren Sound 3 |
| 4 | Siren Sound 4 |
| 5 | Siren Sound 5 |
The manufacturer defined default value is 1 (Siren Sound 1).
This parameter has the configuration ID config_37_2_0000000F and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | 88dB |
| 2 | 100dB |
| 3 | 105dB |
The manufacturer defined default value is 3 (105dB).
This parameter has the configuration ID config_37_2_00000F00 and is of type INTEGER.
send notifications to associated devices Enable to send notifications to associated devices when the state of Siren changed. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Nothing |
| 1 | Hail CC |
| 2 | Basic CC Report |
The manufacturer defined default value is 0 (Nothing).
This parameter has the configuration ID config_80_1 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Disable |
| 1 | Enable |
The manufacturer defined default value is 0 (Disable).
This parameter has the configuration ID config_252_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The DSD31 supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.