| layout | title |
|---|---|
documentation |
ZW056 - ZWave |
{% include base.html %}
This describes the Z-Wave device ZW056, manufactured by AEON Labs with the thing type UID of aeon_zw056_00_000.
The device is in the category of Door, defining Door sensors.
The ZW056 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Aeon Labs Doorbell is a switch binary device based on Z-wave enhanced slave library V6.51.06.
The Doorbell supports playing MP3 music files with a press of this doorbell. It has a 16MB flash memory that can store up to 100 ringtones. The volume can be adjusted manually via short press on the Volume Button, also you can switch the doorbell sound to the next via long press on the Volume Button. You may change/update your doorbell ringtone at any point in time you want by connecting your Doorbell to your PC to update the sound track on your Doorbell’s flash memory.
- Install Doorbell, and plug it into the socket of AC Power.
- Let the primary controller into inclusion mode (If you don’t know how to do this, please refer to its manual).
- Press the Action Button.
- If the inclusion is failed, please repeat the process from step 2.
- Install Doorbell, and plug it into the socket of AC Power.
- Let the primary controller into exclusion mode (If you don’t know how to do this, refer to its manual).
- Press the Action Button.
- If the remove is failed, please repeat the process from step 2.
Note: If Doorbell is removed from Z-wave network, it will be reset to factory default.
The following table summarises the channels available for the ZW056 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Switch | switch_binary | Switch | Switch |
| Volume | config_decimal | Number | |
| Repititions | config_decimal | Number | |
| Play Chime Now | config_decimal | Number | |
| Doorbell Notifications | config_decimal | Number | |
| Button Battery Status | config_decimal | Number |
Switch the power on and off.
The switch_binary channel supports the Switch item and is in the Switch category.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
Generic class for configuration parameter.
The config_decimal channel supports the Number item.
The following table provides a summary of the 13 configuration parameters available in the ZW056. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 2 | Repetitions of ringtone | Set the repetitions for playing doorbell ringtone. |
| 5 | Default ringtone | Set the default doorbell ringtone. Default=1 |
| 6 | Ringtone to play | Set a ringtone to play. Default=0 |
| 7 | Control items | Control current output |
| 8 | Ringtone volume | Default=10 |
| 10 | Define button- and button+ action | Define functions of “Button ‐” and “Button+”. |
| 11 | Define long press button- and button+ | Define short/long button presses |
| 42 | Get wireless button battery status | Alert for low battery |
| 80 | Enable Notifications | Enable to send notifications to associated devices (Group1) |
| 81 | Enable/disable battery group notification | Notifies Group 1 when battery state is low |
| 241 | Pair doorbell with button | Starts wireless button pairing mode |
| 252 | Lock configuration | Lock configuration |
| 255 | Reset | Reset to factory settings |
Set the repetitions for playing doorbell ringtone. Value=1 to 255, the range of repetition is 1 to 100. Value =0, ignore. Note: If the time of playing doorbell ringtone is more than 20s, the volume of ringtone will reduce to silence no matter how many repetitions of doorbell ringtone are set. Values in the range 0 to 100 may be set.
The manufacturer defined default value is 2.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Set the default doorbell ringtone. Default=1
Values in the range 1 to 100 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Set a ringtone to play. Default=0 Set this to any ringtone (1-100) to have it play that ringtone. The following option values may be configured, in addition to values in the range 0 to 100 -:
| Value | Description |
|---|---|
| 0 | Stop |
| 255 | play the default ringtone |
The manufacturer defined default value is 0 (Stop).
This parameter has the configuration ID config_6_1_wo and is of type INTEGER.
This is a write only parameter.
Control current output Control items: Value=1, play Value=2, stop Value=3, pause Value=4, Next Value=5, Previous Other, ignore The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Ignore |
| 1 | Play |
| 2 | Stop |
| 3 | Pause |
| 4 | Next |
| 5 | Previous |
The manufacturer defined default value is 0 (Ignore).
This parameter has the configuration ID config_7_1_wo and is of type INTEGER.
This is a write only parameter.
Default=10
Values in the range 0 to 10 may be set.
The manufacturer defined default value is 10.
This parameter has the configuration ID config_8_1 and is of type INTEGER.
Define functions of “Button ‐” and “Button+”. 0: button- is previous, button+ is next
1: button- is next, button+ is previous The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | “Button ‐” is previous, “Button+” is next |
| 1 | “Button ‐” is next, “Button+” is previous |
The manufacturer defined default value is 0 (“Button ‐” is previous, “Button+” is next).
This parameter has the configuration ID config_10_1 and is of type INTEGER.
Define short/long button presses
0: short pressing changes volume, long pressing changes
default ringtone.
1: long pressing changes volume, short pressing changes
default ringtone.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | short press changes vol, long press changes default ringtone |
| 1 | long press changes vol, short press changes default ringtone |
The manufacturer defined default value is 0 (short press changes vol, long press changes default ringtone).
This parameter has the configuration ID config_11_1 and is of type INTEGER.
Alert for low battery 0x00: normal battery level
0xff: low battery level
set 0x00: cancel low battery alert The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Battery Level Good |
| 255 | Low Battery |
The manufacturer defined default value is 0 (Battery Level Good).
This parameter has the configuration ID config_42_1 and is of type INTEGER.
Enable to send notifications to associated devices (Group1) Enable/disable to send notifications to associated devices (Group 1) when the state of Doorbell is changed (0=nothing, 1=hail CC, 2=basic CC report) The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | nothing |
| 1 | hail CC |
| 2 | basic CC report |
The manufacturer defined default value is 0 (nothing).
This parameter has the configuration ID config_80_1 and is of type INTEGER.
Notifies Group 1 when battery state is low Enable/disable to send notifications to associated devices (Group
- when the Wireless Button’s battery is in low battery state
(0=nothing, 1=Configuration report 0x2A) The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | nothing |
| 1 | Configuration report parameter 42 |
The manufacturer defined default value is 0 (nothing).
This parameter has the configuration ID config_81_1 and is of type INTEGER.
Starts wireless button pairing mode
Pair the Wireless Button with Doorbell.
Value=0x55555555, Start the Wireless Button pairing mode and
the blue Led will blink slowly, short press the Wireless Button
once, if the blue Led change to be solid, which means the pairing
is successful. Otherwise, repeat the steps.
It will automatically exit the pairing mode after 8s if there is no
pressing action of the Wireless Button.
Note:
You can send this configuration Get CC to ask the pairing result:
If configuration report value=0x00000000, which means the
pairing is failed.
If configuration report value =0xFFFFFFFF, which means the
pairing is successful.
Values in the range 0 to 0 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_241_4 and is of type INTEGER.
Lock configuration 0: config not locked
1: config locked Values in the range 0 to 1 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_252_1 and is of type INTEGER.
Reset to factory settings
- Size=0x01， Configuration Value=0x00:
Reset configuration setting. - Size=0x04， Configuration Value=0x55555555:
Reset Factory setting. Values in the range 0 to 0 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_255_4 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The ZW056 supports 2 association groups.
When the state of Doorbell (trigger to turn on/off the rington
e ) is changed:
1, Set Configuration parameter 80 to 0： Reserved (Default).
2, Set Configuration parameter 80 to 1： Send Hail CC.
3. Set Configuration parameter 80 to 2: Send the Basic
Report.
Association group 1 supports 5 nodes.
Forward the Basic Set, Switch Binary Set, Switch Multilevel
Start Level Change, Switch Multilevel Stop Level Change,
Switch Multilevel Set, Scene Activation Set to associated
nodes in Group 2 when the Doorbell receives the Basic Set,
Switch Binary Set, Switch Multilevel Start Level Change,
Switch Multilevel Stop Level Change, Switch Multilevel Set,
Scene Activation Set commands from main controller.
Association group 2 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.