davinciv9_0_0.md

layout	title
documentation	Da Vinci v9 - ZWave

{% include base.html %}

Da Vinci v9

This describes the Z-Wave device Da Vinci v9, manufactured by Avadesign Technology Co. with the thing type UID of avadesign_davinciv9_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

The Da Vinci v9 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.

Overview

The Da Vinci wall controller is a Multi Chanel Z-Wave device that contains up to 6 relays and up to 9 touch buttons that can be set to control either the relays (On/Off switches and shutters) or any other on/off (SWITCH_BINARY) , shutter (MULTILEVEL_SWITCH) Z-Wave device.

Double Press the following buttons in the following order 8,1,3. Use the reset procedure only when the primary controller is missing or inoperable.

Inclusion Information

Press the #1 button 3 times.

Exclusion Information

Press the #1 button 3 times.

Channels

The following table summarises the channels available for the Da Vinci v9 -:

Channel	Channel Id	Category	Item Type
Switch	switch_binary1	Switch	Switch

Switch

Switch the power on and off.

The switch_binary1 channel supports the Switch item and is in the Switch category.

Device Configuration

The following table provides a summary of the 51 configuration parameters available in the Da Vinci v9. Detailed information on each parameter can be found in the sections below.

Param	Name	Description
1	Button 1 Type	button 1 Type
2	Button 1 Partner-Id	Button 1 Partner-Id
3	Button 1 Blind Duration	Button 1 Blind Duration
4	Button 1 Output	Button 1 Output
5	Button 1 attributes	Button 1 attributes
6	Button 2 Type	Button 2 Type
7	Button 2 Partner-Id	Button 2 Partner-Id
8	Button 2 Blind Duration	Button 2 Blind Duration
9	Button 2 Output	Button 2 Output
10	Button 2 attributes	Button 2 attributes
11	Button 3 Type	Button 3 Type
12	Button 3 Partner-Id	Button 3 Partner-Id
13	Button 3 Blind Duration	Button 3 Blind Duration
14	Button 1 Output	Button 1 Output
15	Button 3 attributes	Button 3 attributes
16	Button 4 Type	Button 4 Type
17	Button 4 Partner-Id	Button 4 Partner-Id
18	Button 4 Blind Duration	Button 4 Blind Duration
19	Button 4 Output	Button 4 Output
20	Button 4 attributes	Button 4 attributes
21	Button 5 Type	Button 5 Type
22	Button 5 Partner-Id	Button 5 Partner-Id
23	Button 5 Blind Duration	Button 5 Blind Duration
24	Button 5 Output	Button 5 Output
25	Button 5 attributes	Button 5 attributes
26	Button 6 Type	Button 6 Type
27	Button 6 Partner-Id	Button 6 Partner-Id
28	Button 6 Blind Duration	Button 6 Blind Duration
29	Button 6 Output	Button 6 Output
30	Button 6 attributes	Button 6 attributes
31	Button 7 Type	Button 7 Type
32	Button 7 Partner-Id	Button 7 Partner-Id
33	Button 7 Blind Duration	Button 7 Blind Duration
34	Button 7 Output	Button 7 Output
35	Button 7 attribute	Button 7 attribute
36	Button 8 Type	Button 8 Type
37	Button 8 Partner-Id	Button 8 Partner-Id
38	Button 8 Blind Duration	Button 8 Blind Duration
39	Button 8 Output	Button 8 Output
40	Button 8 attribute	Button 8 attribute
41	Button 9 Type	Button 9 Type
42	Button 9 Partner-Id	Button 9 Partner-Id
43	Button 9 Blind Duration	Button 9 Blind Duration
44	Button 9 Output	Button 9 Output
45	Button 9 attributes	Button 9 attributes
46	Device Led on intensity	Device Led on intensity
47	Device Led off intensity	Device Led off intensity
48	Device Toggle or Pulse the output	Device Toggle or Pulse the output
49	Device Background LEDs Timeout	Device Background LEDs Timeout
50	Device touch sensitivity	Device touch sensitivity
51	Save and Reset	Save and Reset

Parameter 1: Button 1 Type

button 1 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
0	Null
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Button 1 Partner-Id

Button 1 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (0).

This parameter has the configuration ID config_2_2 and is of type INTEGER.

Parameter 3: Button 1 Blind Duration

Button 1 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
10	10 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Button 1 Output

Button 1 Output Output = Relay The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 1 (Output number 1).

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Button 1 attributes

Button 1 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 6: Button 2 Type

Button 2 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_6_1 and is of type INTEGER.

Parameter 7: Button 2 Partner-Id

Button 2 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (0).

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Button 2 Blind Duration

Button 2 Blind Duration Possible values

3-127 The following option values may be configured -:

Value	Description
3	3 Seconds
10	10 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Parameter 9: Button 2 Output

Button 2 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 2 (Output number 2).

This parameter has the configuration ID config_9_1 and is of type INTEGER.

Parameter 10: Button 2 attributes

Button 2 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_10_1 and is of type INTEGER.

Parameter 11: Button 3 Type

Button 3 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_11_1 and is of type INTEGER.

Parameter 12: Button 3 Partner-Id

Button 3 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (0).

This parameter has the configuration ID config_12_1 and is of type INTEGER.

Parameter 13: Button 3 Blind Duration

Button 3 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_13_1 and is of type INTEGER.

Parameter 14: Button 1 Output

Button 1 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 3 (Output number 3).

This parameter has the configuration ID config_14_1 and is of type INTEGER.

Parameter 15: Button 3 attributes

Button 3 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_15_1 and is of type INTEGER.

Parameter 16: Button 4 Type

Button 4 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_16_1 and is of type INTEGER.

Parameter 17: Button 4 Partner-Id

Button 4 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_17_1 and is of type INTEGER.

Parameter 18: Button 4 Blind Duration

Button 4 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_18_1 and is of type INTEGER.

Parameter 19: Button 4 Output

Button 4 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 4 (Output number 4).

This parameter has the configuration ID config_19_1 and is of type INTEGER.

Parameter 20: Button 4 attributes

Button 4 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_20_1 and is of type INTEGER.

Parameter 21: Button 5 Type

Button 5 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_21_1 and is of type INTEGER.

Parameter 22: Button 5 Partner-Id

Button 5 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_22_1 and is of type INTEGER.

Parameter 23: Button 5 Blind Duration

Button 5 Blind Duration

The following option values may be configured -:

Value	Description
3	Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_23_1 and is of type INTEGER.

Parameter 24: Button 5 Output

Button 5 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 6 (Output number 6).

This parameter has the configuration ID config_24_1 and is of type INTEGER.

Parameter 25: Button 5 attributes

Button 5 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_25_1 and is of type INTEGER.

Parameter 26: Button 6 Type

Button 6 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_26_1 and is of type INTEGER.

Parameter 27: Button 6 Partner-Id

Button 6 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_27_1 and is of type INTEGER.

Parameter 28: Button 6 Blind Duration

Button 6 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_28_1 and is of type INTEGER.

Parameter 29: Button 6 Output

Button 6 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 6 (Output number 6).

This parameter has the configuration ID config_29_1 and is of type INTEGER.

Parameter 30: Button 6 attributes

Button 6 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_30_1 and is of type INTEGER.

Parameter 31: Button 7 Type

Button 7 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	On/Off Switch
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (On/Off Switch).

This parameter has the configuration ID config_31_1 and is of type INTEGER.

Parameter 32: Button 7 Partner-Id

Button 7 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_32_1 and is of type INTEGER.

Parameter 33: Button 7 Blind Duration

Button 7 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_33_1 and is of type INTEGER.

Parameter 34: Button 7 Output

Button 7 Output

The following option values may be configured -:

Value	Description
0	None
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_34_1 and is of type INTEGER.

Parameter 35: Button 7 attribute

Button 7 attribute Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_35_1 and is of type INTEGER.

Parameter 36: Button 8 Type

Button 8 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_36_1 and is of type INTEGER.

Parameter 37: Button 8 Partner-Id

Button 8 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_37_1 and is of type INTEGER.

Parameter 38: Button 8 Blind Duration

Button 8 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_38_1 and is of type INTEGER.

Parameter 39: Button 8 Output

Button 8 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6
255	BLANK

The manufacturer defined default value is 0 (No output).

This parameter has the configuration ID config_39_1 and is of type INTEGER.

Parameter 40: Button 8 attribute

Button 8 attribute Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_40_1 and is of type INTEGER.

Parameter 41: Button 9 Type

Button 9 Type 1 = switch on/off

2 = blind up

3 = blind down

4 = switch multiway

5 = blind-up multiway

6 = blind-down multiway The following option values may be configured -:

Value	Description
1	Switch On/Off
2	Blind up
3	Blind down
4	Switch multiway
5	Blind-up multiway
6	Blind-down multiway

The manufacturer defined default value is 1 (Switch On/Off).

This parameter has the configuration ID config_41_1 and is of type INTEGER.

Parameter 42: Button 9 Partner-Id

Button 9 Partner-Id

• When setting Button (EP) to blind, Partner Id EP also change to blind (opposite direction).
• Blind must contain Partner Id which is different than 0 and it must be unique. 
• When setting blind to switch, Partner Id also change to switch The following option values may be configured -:

Value	Description
0	None
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9

The manufacturer defined default value is 0 (None).

This parameter has the configuration ID config_42_1 and is of type INTEGER.

Parameter 43: Button 9 Blind Duration

Button 9 Blind Duration

The following option values may be configured -:

Value	Description
3	3 Seconds
30	30 Seconds
60	60 Seconds
90	90 Seconds
120	120 Seconds

The manufacturer defined default value is 0.

This parameter has the configuration ID config_43_1 and is of type INTEGER.

Parameter 44: Button 9 Output

Button 9 Output

The following option values may be configured -:

Value	Description
0	No output
1	Output number 1
2	Output number 2
3	Output number 3
4	Output number 4
5	Output number 5
6	Output number 6

The manufacturer defined default value is 0 (No output).

This parameter has the configuration ID config_44_1 and is of type INTEGER.

Parameter 45: Button 9 attributes

Button 9 attributes Bit [0] = LED enable

Bit [1] = Sound enable

Bit [2] = Dry contact enable

Bit [3] = Motor enable The following option values may be configured -:

Value	Description
0	None
1	Only Led
2	Only Sound

The manufacturer defined default value is 7.

This parameter has the configuration ID config_45_1 and is of type INTEGER.

Parameter 46: Device Led on intensity

Device Led on intensity

Values in the range 0 to 7 may be set.

The manufacturer defined default value is 7.

This parameter has the configuration ID config_46_1 and is of type INTEGER.

Parameter 47: Device Led off intensity

Device Led off intensity

Values in the range 0 to 7 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_47_1 and is of type INTEGER.

Parameter 48: Device Toggle or Pulse the output

Device Toggle or Pulse the output Device Toggle or Pulse the output:

0 = Toggle

1 = Pulse Values in the range 0 to 1 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_48_1 and is of type INTEGER.

Parameter 49: Device Background LEDs Timeout

Device Background LEDs Timeout Device Background LEDs Timeout:

0 = always Off

10 - 40 = Timeout in seconds

255 = always On!!!!!!! Values in the range 0 to 255 may be set.

The manufacturer defined default value is 10.

This parameter has the configuration ID config_49_1 and is of type INTEGER.

Parameter 50: Device touch sensitivity

Device touch sensitivity You can choose value between 0 – 7

0 = most sensitive

7 = least sensitive Values in the range 0 to 7 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_50_1 and is of type INTEGER.

Parameter 51: Save and Reset

Save and Reset 255 = save and reset The following option values may be configured -:

Value	Description
0
255	Save and Reset

The manufacturer defined default value is 0 (0).

This parameter has the configuration ID config_51_1 and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The Da Vinci v9 supports 37 association groups.

Group 1: Lifeline

The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.

Association group 1 supports 5 nodes.

Group 2: SWITCH_BINARY_SET

EP1_SWITCH_BINARY_SET

Association group 2 supports 5 nodes.

Group 3: SWITCH_BINARY_REPORT

EP1_SWITCH_BINARY_REPORT

Association group 3 supports 5 nodes.

Group 4: SWITCH_MULTILEVEL_SET

EP1_SWITCH_MULTILEVEL_SET

Association group 4 supports 5 nodes.

Group 5: SWITCH_MULTILEVEL_REPORT

EP1_SWITCH_MULTILEVEL_REPORT

Association group 5 supports 5 nodes.

Group 6: SWITCH_BINARY_SET

EP2_SWITCH_BINARY_SET

Association group 6 supports 5 nodes.

Group 7: SWITCH_BINARY_REPORT

EP2_SWITCH_BINARY_REPORT

Association group 7 supports 5 nodes.

Group 8: SWITCH_MULTILEVEL_SET

EP2_SWITCH_MULTILEVEL_SET

Association group 8 supports 5 nodes.

Group 9: SWITCH_MULTILEVEL_REPORT

EP2_SWITCH_MULTILEVEL_REPORT

Association group 9 supports 5 nodes.

Group 10: SWITCH_BINARY_SET

EP3_SWITCH_BINARY_SET

Association group 10 supports 5 nodes.

Group 11: SWITCH_BINARY_REPORT

EP3_SWITCH_BINARY_REPORT

Association group 11 supports 5 nodes.

Group 12: SWITCH_MULTILEVEL_SET

EP3_SWITCH_MULTILEVEL_SET

Association group 12 supports 5 nodes.

Group 13: SWITCH_MULTILEVEL_REPORT

EP3_SWITCH_MULTILEVEL_REPORT

Association group 13 supports 5 nodes.

Group 14: SWITCH_BINARY_SET

EP4_SWITCH_BINARY_SET

Association group 14 supports 5 nodes.

Group 15: SWITCH_BINARY_REPORT

EP4_SWITCH_BINARY_REPORT

Association group 15 supports 5 nodes.

Group 16: SWITCH_MULTILEVEL_SET

EP4_SWITCH_MULTILEVEL_SET

Association group 16 supports 5 nodes.

Group 17: SWITCH_MULTILEVEL_REPORT

EP4_SWITCH_MULTILEVEL_REPORT

Association group 17 supports 5 nodes.

Group 18: SWITCH_BINARY_SET

EP5_SWITCH_BINARY_SET

Association group 18 supports 5 nodes.

Group 19: SWITCH_BINARY_REPORT

EP5_SWITCH_BINARY_REPORT

Association group 19 supports 5 nodes.

Group 20: SWITCH_MULTILEVEL_SET

EP5_SWITCH_MULTILEVEL_SET

Association group 20 supports 5 nodes.

Group 21: SWITCH_MULTILEVEL_REPORT

EP5_SWITCH_MULTILEVEL_REPORT

Association group 21 supports 5 nodes.

Group 22: SWITCH_BINARY_SET

EP6_SWITCH_BINARY_SET

Association group 22 supports 5 nodes.

Group 23: SWITCH_BINARY_REPORT

EP6_SWITCH_BINARY_REPORT

Association group 23 supports 5 nodes.

Group 24: SWITCH_MULTILEVEL_SET

EP6_SWITCH_MULTILEVEL_SET

Association group 24 supports 5 nodes.

Group 25: SWITCH_MULTILEVEL_REPORT

EP6_SWITCH_MULTILEVEL_REPORT

Association group 25 supports 5 nodes.

Group 26: SWITCH_BINARY_SET

EP7_ SWITCH_BINARY_SET

Association group 26 supports 5 nodes.

Group 27: SWITCH_BINARY_REPORT

EP7_SWITCH_BINARY_REPORT

Association group 27 supports 5 nodes.

Group 28: SWITCH_MULTILEVEL_SET

EP7_ SWITCH_MULTILEVEL_SET

Association group 28 supports 5 nodes.

Group 29: SWITCH_MULTILEVEL_REPORT

EP7_ SWITCH_MULTILEVEL_REPORT

Association group 29 supports 5 nodes.

Group 30: SWITCH_BINARY_SET

EP8_SWITCH_BINARY_SET

Association group 30 supports 5 nodes.

Group 31: SWITCH_BINARY_REPORT

EP8_ SWITCH_BINARY_REPORT

Association group 31 supports 5 nodes.

Group 32: SWITCH_MULTILEVEL_SET

EP8_ SWITCH_MULTILEVEL_SET

Association group 32 supports 5 nodes.

Group 33: SWITCH_MULTILEVEL_REPORT

EP8_ SWITCH_MULTILEVEL_REPORT

Association group 33 supports 5 nodes.

Group 34: SWITCH_BINARY_SET

EP9_ SWITCH_BINARY_SET

Association group 34 supports 5 nodes.

Group 35: SWITCH_BINARY_REPORT

EP9_SWITCH_BINARY_REPORT

Association group 35 supports 5 nodes.

Group 36: SWITCH_MULTILEVEL_SET

EP9_ SWITCH_MULTILEVEL_SET

Association group 36 supports 5 nodes.

Group 37: SWITCH_MULTILEVEL_REPORT

EP9_ SWITCH_MULTILEVEL_REPORT

Association group 37 supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class	Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1

Endpoint 1

Command Class	Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_BINARY_V1	Linked to BASIC

Documentation Links

• Manual

---

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.