| layout | title |
|---|---|
documentation |
BSL01 - ZWave |
{% include base.html %}
This describes the Z-Wave device BSL01, manufactured by Benetek with the thing type UID of benetek_bsl01_00_000.
The device is in the category of Lock, defining Devices whose primary pupose is locking something.
The BSL01 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
BENETEK smart lock is night lock style with dead bolt, remote, key, RF card, keypad, Z-Wave.
Material: The lock was made of zinc alloy. The lock shell is 4mm thick. And the inside structure was made of metal. 304 stainless steel panel, the thickness of 1.5mm
Weight: 1800g,
Power supply method: Four AA alkaline batteries and one 18650 rechargeable backup battery.
Batteries lifetime: 2 groups of batteries, Rechargeable battery, Alkaline Batteries: Approximate 1 Year battery life (depend on the usage of the lock)
Features of the Latch: Lock Latch length > 25mm, Comply with GA/T73-94 5.16B standard. Latch size: 25x30x15mm, it is even stronger! Low battery indicator: Prompt indicator in low pressure and It will unlock automatically when no electricity(optional) Urgent method: Mechanical damage to unlock(It has mounting hole on the lock for mechanical lock) Working environment: -3070℃ Humidity<90% Working current (MAX): <500mA Static current of battery: <95μA Wireless remote distance: 10m (Depend on environment) Z-Wave distance(to Z-Wave server): 30m indoor Appearance size: Lock body 152x80x40(mm) Panel: 125x50x25(mm) Voltage of entrance guard: DC 6V30V Voltage of urgent power supply: DC 5V~6.5V (Optional) Capacity of remote: 25pcs Can expand Capacity of password: 13 sets capacity of card: 104pcs can expand Z-Wave frequency: 868.4 MHz - China/Europe, 908.4 MHz - USA, 921.4 MHz – Australia/New Zealand, 869.2 MHz - Russia
Smart Hidden Door Lock restores factory default automatically when the device is excluded. Please use this procedure only when the network primary controller is missing or otherwise inoperable.
- Ensure the SHDL is powered and the battery is fully charged.
- Set the main controller into the Add device mode (see a main controller’s operating manual).
- Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while inclusion process implement and light on 2 second after processing complete.
- Ensure the SHDL is powered and the battery is fully charged.
- Set the main controller into the Remove device mode (see a main controller’s operating manual).
- Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while exclusion process implement and light on 2 second after processing complete.
The following table summarises the channels available for the BSL01 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Door Lock | lock_door | Door | Switch |
| Battery Level | battery-level | Battery | Number |
Lock and unlock the door.
The lock_door channel supports the Switch item and is in the Door category.
The following state translation is provided for this channel to the Switch item type -:
| Value | Label |
|---|---|
| ON | Locked |
| OFF | Unlocked |
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The battery-level channel supports the Number item and is in the Battery category.
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The BSL01 supports 4 association groups.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 1 node.
Association group 2 supports 1 node.
Association group 3 supports 1 node.
Association group 4 supports 1 node.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_APPLICATION_STATUS_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_DOOR_LOCK_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.