| layout | title |
|---|---|
documentation |
LTM-5 - ZWave |
{% include base.html %}
This describes the Z-Wave device LTM-5, manufactured by Evolve with the thing type UID of evolve_ltm5_00_000.
The LTM-5 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the LTM-5 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Switch | switch_binary | Switch | Switch |
| Dimmer | switch_dimmer | DimmableLight | Dimmer |
Switch the power on and off.
The switch_binary channel supports the Switch item and is in the Switch category.
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.
The following table provides a summary of the 7 configuration parameters available in the LTM-5. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Ignore Start Level (Transmitting) | Dimmers controlled by this switch will start dimming from their current level. |
| 3 | Night Light | In night-light mode the LED on the switch will turn ON when the switch is turned OFF. |
| 4 | Invert Switch | Change the top of the switch to OFF and the bottom of the switch to ON. |
| 5 | Ignore Start-Level (Receiving) | The dimmer will start dimming from its current level. |
| 19 | Transmission Indication | Flicker LED while transmitting. |
| 20 | Polling Interval | How often, in minutes, to poll to keep synchronized with group. |
| 21 | Poll First Node | Poll only the first node in Group 1. |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
Dimmers controlled by this switch will start dimming from their current level.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No |
| 1 | Yes |
The manufacturer defined default value is 1 (Yes).
This parameter has the configuration ID config_1_1 and is of type INTEGER.
In night-light mode the LED on the switch will turn ON when the switch is turned OFF.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No |
| 1 | Yes |
The manufacturer defined default value is 1 (Yes).
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Change the top of the switch to OFF and the bottom of the switch to ON.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No |
| 1 | Yes |
The manufacturer defined default value is 0 (No).
This parameter has the configuration ID config_4_1 and is of type INTEGER.
The dimmer will start dimming from its current level.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No |
| 1 | Yes |
The manufacturer defined default value is 1 (Yes).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Flicker LED while transmitting.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No Flicker |
| 1 | Flicker Whole Transmission |
| 2 | Flicker 1 Second |
The manufacturer defined default value is 2 (Flicker 1 Second).
This parameter has the configuration ID config_19_1 and is of type INTEGER.
How often, in minutes, to poll to keep synchronized with group.
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 2.
This parameter has the configuration ID config_20_1 and is of type INTEGER.
Poll only the first node in Group 1.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | No |
| 1 | Yes |
The manufacturer defined default value is 0 (No).
This parameter has the configuration ID config_21_1 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The LTM-5 supports 1 association group.
Association group 1 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_INDICATOR_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.