Skip to content

Files

Latest commit

 

History

History
95 lines (59 loc) · 2.97 KB

csz1_0_0.md

File metadata and controls

95 lines (59 loc) · 2.97 KB
layout title
documentation
CSZ1 - ZWave

{% include base.html %}

CSZ1 Cellular Shade Radio Z-Wave

This describes the Z-Wave device CSZ1, manufactured by Graber with the thing type UID of graber_csz1_00_000.

CSZ1 product image

Overview

See http://products.z-wavealliance.org/products/1749

Inclusion Information

  1. Put Primary Controller into Inclusion Mode
  2. Press and Hold Shade Programming Button for >2 seconds

Exclusion Information

  1. Put Primary Controller into Exclusion Mode
  2. Press and Hold Shade Programming Button for >2 seconds

Channels

The following table summarises the channels available for the CSZ1 -:

Channel Channel Id Category Item Type
Switch switch_binary Switch Switch
Dimmer switch_dimmer DimmableLight Dimmer
Battery Level battery-level Battery Number

Switch

Switch the power on and off.

The switch_binary channel supports the Switch item and is in the Switch category.

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_ZWAVEPLUS_INFO_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1
COMMAND_CLASS_BATTERY_V1
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_VERSION_V2

Documentation Links


Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.