| layout | title |
|---|---|
documentation |
SIR-321 - ZWave |
{% include base.html %}
This describes the Z-Wave device SIR-321, manufactured by Horstmann Controls Limited with the thing type UID of horstmann_sir321_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The SIR-321 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Wirelessly controllable 3 KW wall switch timer function
Press and hold the pairing button on the unit until the RF LED starts flashing at a fast rate. Then release the button.
Press and hold the pairing button on the unit until the RF LED starts flashing at a fast rate. Then release the button.
The following table summarises the channels available for the SIR-321 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Switch | switch_binary | Switch | Switch |
| Temperature | sensor_temperature | Temperature | Number:Temperature |
Switch the power on and off.
The switch_binary channel supports the Switch item and is in the Switch category.
This is what is generated in the zwave node file: SENSOR_MULTILEVEL 1 1 1 TEMPERATURE TEMPERATURE true true
Indicates the current temperature.
The sensor_temperature channel supports the Number:Temperature item and is in the Temperature category.
The following table provides a summary of the 5 configuration parameters available in the SIR-321. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Fail Save timer | Enable/Disable the Fail save timer |
| 2 | Temperature Scale | Set the Temperatur scale to Celsius |
| 3 | Temperature reporting intervals | Define the time interval for the temperature report that is sent. |
| 4 | Delta configuration temperature reporting | Set the delta-configuration of the temperature report in Celsius or Fahrenheit |
| 5 | Temperature Cutoff | Set the Cutoff in Celsius |
Enable/Disable the Fail save timer
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Set the Temperatur scale to Celsius
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_2_2 and is of type INTEGER.
Define the time interval for the temperature report that is sent.
Values in the range 0 to 32767 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_3_2 and is of type INTEGER.
Set the delta-configuration of the temperature report in Celsius or Fahrenheit
Values in the range 0 to 100 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_4_2 and is of type INTEGER.
Set the Cutoff in Celsius
Values in the range 0 to 1000 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_5_2 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The SIR-321 supports 2 association groups.
Group 1
Association group 1 supports 4 nodes.
Group 2
Association group 2 supports 4 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.