| layout | title |
|---|---|
documentation |
PSC234ZW - ZWave |
{% include base.html %}
This describes the Z-Wave device *PSC234ZW *, manufactured by permundo GmbH with the thing type UID of permundo_psc234zw_00_000.
The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.
The PSC234ZW supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the PSC234ZW -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Switch | switch_binary | Switch | Switch |
| Electric meter (kWh) | meter_kwh | Energy | Number |
| Electric meter (watts) | meter_watts | Energy | Number |
Switch the power on and off.
The switch_binary channel supports the Switch item and is in the Switch category.
Indicates the energy consumption (kWh).
The meter_kwh channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Indicates the instantaneous power consumption.
The meter_watts channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
The following table provides a summary of the 1 configuration parameters available in the PSC234ZW . Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 31 | LocalControlOff | Disable local control of plug |
Disable local control of plug 31d Size:1 Default: 00d
Bit 0:
1=LocalControlOff
0=LocalControlOn
Bit 1-7: 0 (siehe auch CC_PROTECTION)
LocalControlOff: In der Werkseinstellung (LocalControlOff=0) ändert das Gerät den Zustand des Ausgangs bei Betätigung des TouchButtons. Durch das Setzen von LocalControlOff=1 kann der Ausgang des Geräts nur noch über Z-Wave+ gesteuert werden.
LocalControlOff wird entweder über Parameter 31 der CC_CONFIGURATION oder über CC_PROTECTION, PROTECTION_SET konfiguriert. The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Disable Local Control |
The manufacturer defined default value is 0.
This parameter has the configuration ID config_31_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The PSC234ZW supports 1 association group.
Reports triggered by change of relay state, meter values or time Assoziationsgruppe Gruppe 1 (lifeline): 5 Events/Notifications:
(1) Sendet COMMAND_CLASS_BASIC, BASIC_REPORT und COMMAND_CLASS_SWITCH_BINARY, BINARY_REPORT jeweils nach Änderung des RelaisStatus.
(2) Sendet COMMAND_CLASS_METER_V2, METER_REPORT_V2 jeweils nach Änderung der Messwerte Energie oder Leistung entweder um einen Minimalbetrag, oder nach Ablauf einer Maximalzeit. Ebenso wird nach jedem Report eine Mindestzeit gewartet, bevor ein nächster Report gesendet wird. Zeiten für Werte Energie/Leistung:
Mindestzeit zwischen 2 Reports: 1s PSC234ZW RC2.05 G3 DE 7
Maximalzeit bis zum nächsten Report: 15min. Trigger bei Abweichung seit letzter Messung: 4% Leistung (mind. 2W) oder 1Wh Energie
Association group 1 supports 1 node.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_METER_V2 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V2 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | |
| COMMAND_CLASS_CONFIGURATION_V2 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_PROTECTION_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.