| layout | title |
|---|---|
documentation |
ED2.0 - ZWave |
{% include base.html %}
This describes the Z-Wave device ED2.0, manufactured by Prodrive Technologies with the thing type UID of prodrive_ed20_00_000.
The ED2.0 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
The meter adapter measures gas and electricity usage of analog and digital meters. Analog meters are read by means of optical sensors that can be placed on the meter to monitor the rotating disc or the blinking LED. In case of a digital meter, the meter adapter can be connected to the digital meter by means of a P1 digital communication interface. The meter adapter measures the cumulative and instantaneous gas and electricity consumption and sends this information to a Z-Wave enabled display (ED2.0 Display).
Press Button
The following table summarises the channels available for the ED2.0 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Clock Time Offset | time_offset | Temperature | Number |
| Gas meter (cubic meters) | meter_gas_cubic_meters1 | Energy | Number |
| Electric meter (kWh) | meter_kwh2 | Energy | Number |
| Electric meter (kWh) | meter_kwh3 | Energy | Number |
| Electric meter (kWh) | meter_kwh4 | Energy | Number |
| Electric meter (kWh) | meter_kwh5 | Energy | Number |
| Electric meter (kWh) | meter_kwh6 | Energy | Number |
Provides the current time difference for the devices time.
The time_offset channel supports the Number item and is in the Temperature category.
Indicates the gas use in cubic meters.
The meter_gas_cubic_meters1 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Single-E import
Indicates the energy consumption (kWh).
The meter_kwh2 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
Twin-E day import
Indicates the energy consumption (kWh).
The meter_kwh3 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
<td>
</td>
| Twin-E day export |
Indicates the energy consumption (kWh).
The meter_kwh4 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
<td>
</td>
| Twin-E night import |
Indicates the energy consumption (kWh).
The meter_kwh5 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
<td>
</td>
| Twin-E night export |
Indicates the energy consumption (kWh).
The meter_kwh6 channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
The following table provides a summary of the 4 configuration parameters available in the ED2.0. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 0 | Gas Metering | Enable and disable gas metering |
| 1 | Gas Meter resolution | The resolution of the analog gas meter |
| 2 | Electricity metering | Enable and disable Electricity metering |
| 3 | Electricity meter resolution | The resolution of the analog electricity meter |
Enable and disable gas metering
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | disable gas metering |
| 1 | enable gas metering |
The manufacturer defined default value is 1 (enable gas metering).
This parameter has the configuration ID config_0_1 and is of type INTEGER.
The resolution of the analog gas meter The resolution of the analog gas meter (revolutions per m³) in unsigned Q14.2 notation. Values in the range 0 to 0 may be set.
The manufacturer defined default value is 400.
This parameter has the configuration ID config_1_2 and is of type INTEGER.
Enable and disable Electricity metering
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | disable electricity metering |
| 1 | enable electricity metering |
The manufacturer defined default value is 1 (enable electricity metering).
This parameter has the configuration ID config_2_1 and is of type INTEGER.
The resolution of the analog electricity meter The resolution of the analog electricity meter (revolutions per kWh) in unsigned Q14.2 notation. Values in the range 0 to 0 may be set.
The manufacturer defined default value is 400.
This parameter has the configuration ID config_3_2 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_APPLICATION_STATUS_V1 | |
| COMMAND_CLASS_METER_TBL_CONFIG_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_METER_TBL_PUSH_V1 | |
| COMMAND_CLASS_CRC_16_ENCAP_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_V2 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_TIME_PARAMETERS_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_METER_TBL_MONITOR_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.