| layout | title |
|---|---|
documentation |
ZXT-120 - ZWave |
{% include base.html %}
This describes the Z-Wave device ZXT-120, manufactured by Remotec with the thing type UID of remotec_zxt120_00_000.
The ZXT-120 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the ZXT-120 -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Sensor (temperature) | sensor_temperature | Temperature | Number:Temperature |
| Thermostat mode | thermostat_mode | Temperature | Number |
| Setpoint (cooling) | thermostat_setpoint | Temperature | Number:Temperature |
| Setpoint (heating) | thermostat_setpoint | Temperature | Number:Temperature |
| Thermostat fan mode | thermostat_fanmode | ||
| Battery Level | battery-level | Battery | Number |
Indicates the current temperature.
The sensor_temperature channel supports the Number:Temperature item and is in the Temperature category.
Sets the thermostat.
The thermostat_mode channel supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Off |
| 1 | Heat |
| 2 | Cool |
| 3 | Auto |
| 4 | Aux Heat |
| 5 | Resume |
| 6 | Fan Only |
| 7 | Furnace |
| 8 | Dry Air |
| 9 | Moist Air |
| 10 | Auto Changeover |
| 11 | Heat Economy |
| 12 | Cool Economy |
| 13 | Away |
Sets the thermostat setpoint.
The thermostat_setpoint channel supports the Number:Temperature item and is in the Temperature category.
Sets the thermostat setpoint.
The thermostat_setpoint channel supports the Number:Temperature item and is in the Temperature category.
Channel type information on this channel is not found.
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The battery-level channel supports the Number item and is in the Battery category.
The following table provides a summary of the 8 configuration parameters available in the ZXT-120. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 25 | Indicate a location for IR code learning and start learning | |
| 26 | Learning status register (Read Only) | |
| 27 | IR code number for built-in code library | |
| 28 | External IR Emitter power level | |
| 32 | Surround IR control | |
| 33 | AC function Swing control | |
| 35 | Learn location status. Bitmask. (Read Only) | |
| 37 | Sensor temperature compensation | |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
Values in the range 0 to 22 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_25_1 and is of type INTEGER.
Values in the range 0 to 4 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_26_1 and is of type INTEGER.
This is a read only parameter.
Values in the range 0 to 65535 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_27_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Normal power mode |
| 255 | High power mode |
The manufacturer defined default value is 255 (High power mode).
This parameter has the configuration ID config_28_1 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| -1 | Enable Surround IR Emitters |
| 0 | Disable Surround IR Emitters |
The manufacturer defined default value is -1 (Enable Surround IR Emitters).
This parameter has the configuration ID config_32_1 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Swing Off |
| 1 | Swing Auto |
The manufacturer defined default value is 1 (Swing Auto).
This parameter has the configuration ID config_33_1 and is of type INTEGER.
Values in the range 0 to 65535 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_35_4 and is of type INTEGER.
This is a read only parameter.
Values in the range -5 to 5 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_37_1 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V1 | |
| COMMAND_CLASS_THERMOSTAT_MODE_V2 | |
| COMMAND_CLASS_THERMOSTAT_SETPOINT_V2 | |
| COMMAND_CLASS_THERMOSTAT_FAN_MODE_V2 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.