| layout | title |
|---|---|
documentation |
AZL7434 - ZWave |
{% include base.html %}
This describes the Z-Wave device AZL7434, manufactured by Vision Security with the thing type UID of vision_azl7434_05_001.
This version of the device is limited to firmware version 5.1
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The AZL7434 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
In-wall switch 1-relay
Press 3 times on Program button within 2 seconds or turn on the wall switch 3 times within 2 seconds.
Press 3 times on Program button within 2 seconds or turn on the wall switch within 2 seconds
The following table summarises the channels available for the AZL7434 -:
| Channel | Channel Id | Category | Item Type |
|---|
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.