layout | title |
---|---|
documentation |
YRL210 - ZWave |
{% include base.html %}
This describes the Z-Wave device YRL210, manufactured by ASSA ABLOY with the thing type UID of yale_yrl210_00_000
.
The device is in the category of Lock, defining Devices whose primary pupose is locking something.
The YRL210 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
Secure your home with this Yale Real Living electronic lever lock and enjoy the convenience of unlocking and locking your door using the back lit push button keypad; you'll never have to carry around your keys again. Create unique pin codes for friends and family and remove codes whenever you need to.
The lock is Grade 2 certified and backed Yale, one of the world's best known brands in the lock industry that's been securing homes since 1846, ensuring that your home and family is always safe.
To include the lock in a Z-Wave Network (taken from the installation manual):
- Touch the lock screen to activate
- Enter the master pin and press #
- Press 7, then #
- Press 1, then #
The lock will now be in inclusion mode.
To exclude the lock from a Z-Wave Network (taken from the installation manual):
- Touch the lock screen to activate
- Enter the master pin and press #
- Press 7, then #
- Press 3, then #
The lock will now be in exclusion mode.
The following table summarises the channels available for the YRL210 -:
Channel | Channel Id | Category | Item Type |
---|---|---|---|
Door Lock | lock_door | Door | Switch |
Alarm | alarm_general | Door | Switch |
Battery Level | battery-level | Battery | Number |
Clock Time Offset | time_offset | Temperature | Number |
Lock and unlock the door.
The lock_door
channel supports the Switch
item and is in the Door
category.
The following state translation is provided for this channel to the Switch
item type -:
Value | Label |
---|---|
ON | Locked |
OFF | Unlocked |
Indicates if an alarm is triggered.
The alarm_general
channel supports the Switch
item and is in the Door
category. This is a read only channel so will only be updated following state changes from the device.
The following state translation is provided for this channel to the Switch
item type -:
Value | Label |
---|---|
OFF | OK |
ON | Alarm |
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The battery-level
channel supports the Number
item and is in the Battery
category.
Provides the current time difference for the devices time.
The time_offset
channel supports the Number
item and is in the Temperature
category.
The following table provides a summary of the 7 configuration parameters available in the YRL210. Detailed information on each parameter can be found in the sections below.
Param | Name | Description |
---|---|---|
1 | Audio Mode | |
2 | Auto relock | |
3 | Relock time | Time to relock after unlocking (seconds) |
4 | Wrong Code Entry Limit | Invalid unlock attempts before shutdown/alarm |
5 | Language | |
7 | Shutdown Time | Invalid unlock attempts before lock out |
8 | Operating Mode | Operating mode (normal/vacation/privacy) |
Lock Timeout | Sets the time after which the door will auto lock |
The following option values may be configured -:
Value | Description |
---|---|
1 | Silent |
2 | Low |
3 | High |
The manufacturer defined default value is 3
(High).
This parameter has the configuration ID config_1_1
and is of type INTEGER
.
The following option values may be configured -:
Value | Description |
---|---|
0 | Off |
255 | On |
The manufacturer defined default value is 255
(On).
This parameter has the configuration ID config_2_1
and is of type INTEGER
.
Time to relock after unlocking (seconds)
Values in the range 5 to 255 may be set.
The manufacturer defined default value is 30
.
This parameter has the configuration ID config_3_1
and is of type INTEGER
.
Invalid unlock attempts before shutdown/alarm
Values in the range 1 to 7 may be set.
The manufacturer defined default value is 5
.
This parameter has the configuration ID config_4_1
and is of type INTEGER
.
The following option values may be configured -:
Value | Description |
---|---|
1 | English |
2 | Spanish |
3 | French |
The manufacturer defined default value is 1
(English).
This parameter has the configuration ID config_5_1
and is of type INTEGER
.
Invalid unlock attempts before lock out
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 30
.
This parameter has the configuration ID config_7_1
and is of type INTEGER
.
Operating mode (normal/vacation/privacy) 0 = Normal
1 = Vacation Mode (User Codes Disabled)
2 = Privacy Mode (User Codes and Z-Wave Disabled) The following option values may be configured -:
Value | Description |
---|---|
0 | Normal |
1 | Vacation |
2 | Privacy |
The manufacturer defined default value is 0
(Normal).
This parameter has the configuration ID config_8_1
and is of type INTEGER
.
Sets the time after which the door will auto lock.
This parameter has the configuration ID doorlock_timeout
and is of type INTEGER
.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The YRL210 supports 1 association group.
Association group 1 supports 4 nodes.
Command Class | Comment |
---|---|
COMMAND_CLASS_NO_OPERATION_V1 | |
COMMAND_CLASS_BASIC_V1 | |
COMMAND_CLASS_DOOR_LOCK_LOGGING_V1 | |
COMMAND_CLASS_SCHEDULE_ENTRY_LOCK_V1 | |
COMMAND_CLASS_DOOR_LOCK_V1 | |
COMMAND_CLASS_USER_CODE_V1 | |
COMMAND_CLASS_CONFIGURATION_V1 | |
COMMAND_CLASS_ALARM_V1 | |
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
COMMAND_CLASS_PROTECTION_V2 | |
COMMAND_CLASS_BATTERY_V1 | |
COMMAND_CLASS_ASSOCIATION_V1 | |
COMMAND_CLASS_VERSION_V1 | |
COMMAND_CLASS_TIME_V1 | |
COMMAND_CLASS_TIME_PARAMETERS_V1 | |
COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.