| layout | title |
|---|---|
documentation |
RGBWE27ZW - ZWave |
{% include base.html %}
This describes the Z-Wave device RGBWE27ZW, manufactured by Zipato with the thing type UID of zipato_rgbwe27zw_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The RGBWE27ZW supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the RGBWE27ZW -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Dimmer | switch_dimmer | DimmableLight | Dimmer |
| Color Control | color_color | Color | |
| Color Temperature | color_temperature | ColorLight | Dimmer |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel supports the Color item.
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel supports the Dimmer item and is in the ColorLight category.
The following table provides a summary of the 5 configuration parameters available in the RGBWE27ZW. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Color temperature | Values range from 0 to 100 where 0 is cold white and 100 is warm white. |
| 2 | Shock sensor sensitivity | Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity. |
| 3 | Strobe Light Interval | Values range from 0 to 25 in intervals of 100 milliseconds. |
| 4 | Strobe Light Pulse Count | Values range from 0 to 250 and a special value 255 which sets infinite flashing. |
| 5 | Enable or Disable Random Strobe Pulse Colors | Values range are 0 (turn on) or 1 (turn off). |
Values range from 0 to 100 where 0 is cold white and 100 is warm white.
Values in the range 1 to 100 may be set.
The manufacturer defined default value is 50.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity.
Values in the range 0 to 31 may be set.
The manufacturer defined default value is 16.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Values range from 0 to 25 in intervals of 100 milliseconds.
Values in the range 0 to 25 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Values range from 0 to 250 and a special value 255 which sets infinite flashing.
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Values range are 0 (turn on) or 1 (turn off).
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | turn off |
| 1 | turn on |
The manufacturer defined default value is 0 (turn off).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The RGBWE27ZW supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 7 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_COLOR_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.