Add files via upload

Author: universalbit-dev

g-code/empty.gcode

@@ -0,0 +1,68 @@
+%
+(Header)
+(Generated by gcodetools from Inkscape.)
+(Using default header. To add your own header create file "header" in the output dir.)
+M3 00000
+(Header end.)
+G21 (All units in mm)
+
+(EMPTY GCODE FILE)
+
+G00 Z5.000000
+G00 X0.0000 Y0.0000
+
+G01 X0.0000 Y0.0000 Z-1.000000 
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G01 X0.0000 Y0.0000 Z-1.000000
+G00 Z5.000000
+
+(End cutting path id: path27)
+
+(Footer)
+M5
+G00 X0.0000 Y0.0000
+M2
+(Using default footer. To add your own footer create file "footer" in the output dir.)
+(end)
+%