-
Notifications
You must be signed in to change notification settings - Fork 66
Home
Welcome to the headunit-desktop wiki!
-
Download the Raspberry Pi image which is based on Raspbian Stretch Lite from here: http://files.headunit.viktorgino.me/index.html
-
Flash the image to an SD card following the usual steps for flashing Raspbian : https://www.raspberrypi.org/documentation/installation/installing-images/
-
Insert the SD card into your Pi and power it up
-
Headunit-desktop will automatically start with Raspbian
You will need to enable SSH first:
For headless setup, SSH can be enabled by placing a file named ssh, without any extension, onto the boot partition of the SD card from another computer. When the Pi boots, it looks for the ssh file. If it is found, SSH is enabled and the file is deleted. The content of the file does not matter; it could contain text, or nothing at all.
If you have loaded Raspbian onto a blank SD card, you will have two partitions. The first one, which is the smaller one, is the boot partition. Place the file into this on
Source: https://www.raspberrypi.org/documentation/remote-access/ssh/
The login use the following username/password:
Username: pi
Password: raspberry
For building your own Raspbian images see: viktorgino/pi-gen
For more details and install instructions see: headunit.viktorgino.me/