EFI files for hackintosh on the GPD P2 MAX, works on Catalina and Big Sur. If you see anything that could be added or changed don't hesitate to make a pull request.
- Create a bootable Big Sur or Catalina bootable USB using this tutorial but use my CLOVER folder at the point where you should configure CLOVER bootloader
- Boot from this usb then install Big Sur/Catalina on a free partition of your drive
- During first boot, after installing the OS, mount your EFI partition and place the CLOVER folder alongside other OSes bootloader
- Reboot and change BIOS bootloader order to have clover bootloader as first entry
- Open your config.plist and generate a new serial number Tutorial here, If you use the
Clover Configuratorto generate directly, it will be more convenient. - Install additionals drivers.
- Reboot and enjoy !
- Graphics Acceleration
- Bluetooth
- Brightness control
- Audio
- Power Management
- Battery Status
- USB and USB Mapping
- Keyboard
- Camera
- Sleep / Wake ( Black screen on Big Sur when wake up )
- TouchPad ( 20190919 Chinese keyboard firmware will cause problems, use the file driver inside touchpad_driver to downgrade, credits : @Gabe87 from insanelymac )
- TouchScreen
- Internal Wi-Fi Intel AC 7625
- Fingerprint Sensor
The lastest Wi-Fi and Bluetooth driver: https://github.com/OpenIntelWireless
I removed
<key>framebuffer-fbmem</key>
<data>AAAAAw==</data>
<key>framebuffer-stolenmem</key>
<data>AAAwAQ==</data>
in config.plist to support more higher resolution, such as 1440x900 HiDPI, 1680x1050 HiDPI.
So you shoud run:
setup_var_3 0x876 0x02
like this (#16) to set the DVMT Pre-Allocated from 32M to 64M.
@Gabe87 from insanelymac forums
Fewt's Hackintosh guide
GPD for making the great P2 MAX
Thanks to @andreyakostov for his direct contributions and help throughout the project since the beginning !
@lazd for the Goodix TouchScreen driver
@THEDVIOUS1
@andot