Use NetworkConfigurator

.github/workflows/compile-examples.yml

@@ -21,12 +21,18 @@ jobs:
       UNIVERSAL_LIBRARIES: |
         # Install the ArduinoIoTCloud library from the repository
         - source-path: ./
-        - name: Arduino_ConnectionHandler
+        - source-url: https://github.com/fabik111/Arduino_ConnectionHandler.git
+          version: 0314cf54593029aea05bb8c179e40a26128f7d67
+        - name: ArduinoBLE
         - name: ArduinoHttpClient
         - name: Arduino_DebugUtils
         - name: ArduinoMqttClient
-        - name: Arduino_SecureElement
-        - name: Arduino_CloudUtils
+        - source-url: https://github.com/pennam/Arduino_SecureElement.git
+          version: 4900febf84435c1a06bb13451bced3bac6f16e76
+        - source-url: https://github.com/arduino-libraries/Arduino_CloudUtils.git
+        - name: Arduino_KVStore
+        - source-url: https://github.com/arduino-libraries/Arduino_UniqueHWId.git
+        - source-url: https://github.com/arduino-libraries/Arduino_NetworkConfigurator.git
       # sketch paths to compile (recursive) for all boards
       UNIVERSAL_SKETCH_PATHS: |
         - examples/ArduinoIoTCloud-Advanced
@@ -125,15 +131,18 @@ jobs:
               - name: ArduinoECCX08
               - name: Blues Wireless Notecard
               - name: RTCZero
-              - name: WiFiNINA
+              - source-url: https://github.com/andreagilardoni/WiFiNINA.git
+                version: 31616ac5a30f6281c68f982bc39800771b2fbaeb
               - name: Arduino_JSON
               - source-url: https://github.com/adafruit/Adafruit_SleepyDog.git
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-DeferredOTA
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
               - examples/utility/SelfProvisioning
+              - examples/utility/Provisioning_2.0
           - board:
               type: wan
             platforms: |
@@ -190,10 +199,12 @@ jobs:
               - name: Arduino_Cellular
               - name: Blues Wireless Notecard
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-DeferredOTA
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
+              - examples/utility/Provisioning_2.0
           # Nicla Vision
           - board:
               type: mbed_nicla
@@ -202,11 +213,14 @@ jobs:
               - name: arduino:mbed_nicla
             libraries: |
               - name: Blues Wireless Notecard
+              - name: ArduinoECCX08
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-DeferredOTA
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
+              - examples/utility/Provisioning_2.0
           # Opta
           - board:
               type: mbed_opta
@@ -217,10 +231,12 @@ jobs:
               - name: ArduinoECCX08
               - name: Blues Wireless Notecard
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-DeferredOTA
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
+              - examples/utility/Provisioning_2.0
           # GIGA
           - board:
               type: mbed_giga
@@ -231,10 +247,12 @@ jobs:
               - name: ArduinoECCX08
               - name: Blues Wireless Notecard
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-DeferredOTA
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
+              - examples/utility/Provisioning_2.0
           # Portenta C33
           - board:
               type: renesas_portenta
@@ -244,10 +262,13 @@ jobs:
             libraries: |
               - name: Arduino_Cellular
               - name: Blues Wireless Notecard
+              - name: ArduinoECCX08
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
               - examples/utility/Provisioning
+              - examples/utility/Provisioning_2.0
           # UNO R4 WiFi
           - board:
               type: renesas_uno
@@ -256,9 +277,12 @@ jobs:
               - name: arduino:renesas_uno
             libraries: |
               - name: Blues Wireless Notecard
+              - name: ArduinoECCX08
             sketch-paths: |
+              - examples/ArduinoIoTCloud-NetConfig
               - examples/ArduinoIoTCloud-Notecard
               - examples/ArduinoIoTCloud-Schedule
+              - examples/utility/Provisioning_2.0
           # Nano ESP32
           - board:
               type: arduino_esp32
@@ -337,6 +361,9 @@ jobs:
             ${{ matrix.sketch-paths }}
           enable-deltas-report: "true"
           sketches-report-path: ${{ env.SKETCHES_REPORTS_PATH }}
+          cli-compile-flags: |
+            - --output-dir
+            - ${{ runner.temp }}/arduino-cli-output
 
       - name: Write data to size trends report spreadsheet
         # Update report on every push to the master branch
@@ -353,3 +380,10 @@ jobs:
         with:
           name: sketches-report-${{ matrix.board.artifact-name-suffix }}
           path: ${{ env.SKETCHES_REPORTS_PATH }}
+
+      - name: Save build artifact
+        if: github.event_name == 'pull_request'
+        uses: actions/upload-artifact@v4
+        with:
+          name: provisioning-${{ matrix.board.artifact-name-suffix }}
+          path: ${{ runner.temp }}/arduino-cli-output/Provisioning_2.0*

examples/ArduinoIoTCloud-NetConfig/ArduinoIoTCloud-NetConfig.ino

@@ -0,0 +1,62 @@
+/*
+  This sketch demonstrates how to exchange data between your board and the Arduino IoT Cloud.
+
+  * Connect a potentiometer (or other analog sensor) to A0.
+  * When the potentiometer (or sensor) value changes the data is sent to the Cloud.
+  * When you flip the switch in the Cloud dashboard the onboard LED lights gets turned ON or OFF.
+
+  IMPORTANT:
+  This sketch works with WiFi, GSM, NB, Ethernet and Lora enabled boards supported by Arduino IoT Cloud.
+  On a LoRa board, if it is configured as a class A device (default and preferred option),
+  values from Cloud dashboard are received only after a value is sent to Cloud.
+
+  The full list of compatible boards can be found here:
+   - https://github.com/arduino-libraries/ArduinoIoTCloud#what
+*/
+
+#include "thingProperties.h"
+
+#if !defined(LED_BUILTIN) && !defined(ARDUINO_NANO_ESP32)
+static int const LED_BUILTIN = 2;
+#endif
+
+void setup() {
+  /* Initialize serial and wait up to 5 seconds for port to open */
+  Serial.begin(9600);
+  for(unsigned long const serialBeginTime = millis(); !Serial && (millis() - serialBeginTime <= 5000); ) { }
+
+  /* Set the debug message level:
+   * - DBG_ERROR: Only show error messages
+   * - DBG_WARNING: Show warning and error messages
+   * - DBG_INFO: Show info, warning, and error messages
+   * - DBG_DEBUG: Show debug, info, warning, and error messages
+   * - DBG_VERBOSE: Show all messages
+   */
+  setDebugMessageLevel(DBG_INFO);
+
+  /* Configure LED pin as an output */
+  pinMode(LED_BUILTIN, OUTPUT);
+
+  /* This function takes care of connecting your sketch variables to the ArduinoIoTCloud object */
+  initProperties();
+
+  /* Initialize Arduino IoT Cloud library */
+  ArduinoCloud.begin(ArduinoIoTPreferredConnection);
+
+  ArduinoCloud.printDebugInfo();
+}
+
+void loop() {
+  ArduinoCloud.update();
+  potentiometer = analogRead(A0);
+  seconds = millis() / 1000;
+}
+
+/*
+ * 'onLedChange' is called when the "led" property of your Thing changes
+ */
+void onLedChange() {
+  Serial.print("LED set to ");
+  Serial.println(led);
+  digitalWrite(LED_BUILTIN, led);
+}

examples/ArduinoIoTCloud-NetConfig/thingProperties.h

@@ -0,0 +1,48 @@
+#if !defined(ARDUINO_SAMD_MKRWIFI1010) && !defined(ARDUINO_SAMD_NANO_33_IOT) &&  !defined(ARDUINO_NANO_RP2040_CONNECT) \
+  && !defined(ARDUINO_PORTENTA_H7_M7) && !defined(ARDUINO_NICLA_VISION) && !defined(ARDUINO_OPTA) && !defined(ARDUINO_GIGA) \
+  && !defined(ARDUINO_UNOR4_WIFI) && !defined(ARDUINO_PORTENTA_C33)
+#error "This example is not compatible with this board."
+#endif
+#include <ArduinoIoTCloud.h>
+#include <Arduino_ConnectionHandler.h>
+#include <GenericConnectionHandler.h>
+#include "ConfiguratorAgents/agents/BLE/BLEAgent.h"
+#include "ConfiguratorAgents/agents/Serial/SerialAgent.h"
+
+void onLedChange();
+
+bool led;
+int potentiometer;
+int seconds;
+
+GenericConnectionHandler ArduinoIoTPreferredConnection;
+KVStore kvStore;
+NetworkConfiguratorClass NetworkConfigurator(ArduinoIoTPreferredConnection);
+BLEAgentClass BLEAgent;
+SerialAgentClass SerialAgent;
+
+void initProperties() {
+  NetworkConfigurator.addAgent(BLEAgent);
+  NetworkConfigurator.addAgent(SerialAgent);
+  NetworkConfigurator.setStorage(kvStore);
+
+  /* For changing the default reset pin uncomment and set your preferred pin.
+   * Use DISABLE_PIN for disabling the reset procedure.
+   * The pin must be in the list of digital pins usable for interrupts.
+   * Please refer to the Arduino documentation for more details:
+   * https://docs.arduino.cc/language-reference/en/functions/external-interrupts/attachInterrupt/
+   */
+  //NetworkConfigurator.setReconfigurePin(your_pin);
+
+  /* Otherwise if you need to monitor the pin status changes
+   * you can set a custom callback function that is fired on every change
+   */
+  //NetworkConfigurator.setPinChangedCallback(your_callback);
+
+  ArduinoCloud.setConfigurator(NetworkConfigurator);
+
+  ArduinoCloud.addProperty(led, Permission::Write).onUpdate(onLedChange);
+  ArduinoCloud.addProperty(potentiometer, Permission::Read).publishOnChange(10);
+  ArduinoCloud.addProperty(seconds, Permission::Read).publishOnChange(1);
+
+}