CompanionPi is a prebuilt image for the Raspberry Pi 4B, setup to run Bitfocus Companion
This repository houses the tooling for building the images, only issues relating to the image building/updating should be reported here.
This also works on other headless Debian or Ubuntu machines.
Prebuilt images can be found on the Bitfocus website
Note: This has been written for arm64 images, and is not tested or supported on anything below a 4B. We do not recommend running it on anything lower, but you can follow the manual install instuctions if you are sure you want to.
No images are provided for this, but the process has been written to be a single script.
As root, run the following:
curl https://raw.githubusercontent.com/bitfocus/companion-pi/main/install.sh | bash
After this, you can use sudo companion-update to change the version it has installed.
Note: This script will create a new user called companion, which Companion will be run as and will own the configuration.
Warning: This has only been tested on linux, but it should work wherever packer is supported.
This repository utilises packer to build images, using an arm-image plugin to add to an official raspberry-pi-lite image.
After installing packer, set it up for this project: packer init companionpi.pkr.hcl.
You can then perform the build with packer build --var pibranch=main companionpi.pkr.hcl. Be aware that this can be very slow, due to the cpu architecture emulation.
Once complete, the file output-companionpi/image can be written to an sd card and launched on a pi