chore(deps): update pnpm to v10.8.1

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
pnpm (source)	10.5.1+sha512.c424c076bd25c1a5b188c37bb1ca56cc1e136fbf530d98bcb3289982a08fd25527b8c9c4ec113be5e3393c39af04521dd647bcf1d0801eaf8ac6a7b14da313af -> 10.8.1

---

Release Notes

pnpm/pnpm (pnpm)

v10.8.1

Compare Source

Patch Changes

• Removed bright white highlighting, which didn't look good on some light themes #​9389.
• If there is no pnpm related configuration in package.json, onlyBuiltDependencies will be written to pnpm-workspace.yaml file #​9404.

v10.8.0

Compare Source

Minor Changes

• Experimental. A new hook is supported for updating configuration settings. The hook can be provided via .pnpmfile.cjs. For example:

  module.exports = {
    hooks: {
      updateConfig: (config) => ({
        ...config,
        nodeLinker: "hoisted",
      }),
    },
  };

• Now you can use the pnpm add command with the --config flag to install new configurational dependencies #​9377.

Patch Changes

• Do not hang indefinitely, when there is a glob that starts with !/ in pnpm-workspace.yaml. This fixes a regression introduced by #​9169.
• pnpm audit --fix should update the overrides in pnpm-workspace.yaml.
• pnpm link should update overrides in pnpm-workspace.yaml, not in package.json #​9365.

v10.7.1: pnpm 10.7.1

Compare Source

Patch Changes

• pnpm config set should convert the settings to their correct type before adding them to pnpm-workspace.yaml #​9355.
• pnpm config get should read auth related settings via npm CLI #​9345.
• Replace leading ~/ in a path in .npmrc with the home directory #​9217.

Platinum Sponsors

Gold Sponsors

v10.7.0

Compare Source

Minor Changes

• pnpm config get and list also show settings set in pnpm-workspace.yaml files #​9316.

• It should be possible to use env variables in pnpm-workspace.yaml setting names and value.

• Add an ability to patch dependencies by version ranges. Exact versions override version ranges, which in turn override name-only patches. Version range * is the same as name-only, except that patch application failure will not be ignored.

  For example:

  patchedDependencies:
    foo: patches/foo-1.patch
    foo@^2.0.0: patches/foo-2.patch
    [email protected]: patches/foo-3.patch

  The above configuration would apply patches/foo-3.patch to [email protected], patches/foo-2.patch to all foo versions which satisfy ^2.0.0 except 2.1.0, and patches/foo-1.patch to the remaining foo versions.

  [!WARNING]
  The version ranges should not overlap. If you want to specialize a sub range, make sure to exclude it from the other keys. For example:

  # pnpm-workspace.yaml
  patchedDependencies:
    # the specialized sub range
    '[email protected]': patches/foo.2.2.0-2.8.0.patch
    # the more general patch, excluding the sub range above
    'foo@>=2.0.0 <2.2.0 || >2.8.0': 'patches/foo.gte2.patch

  In most cases, however, it's sufficient to just define an exact version to override the range.

• pnpm config set --location=project saves the setting to a pnpm-workspace.yaml file if no .npmrc file is present in the directory #​9316.

• Rename pnpm.allowNonAppliedPatches to pnpm.allowUnusedPatches. The old name is still supported but it would print a deprecation warning message.

• Add pnpm.ignorePatchFailures to manage whether pnpm would ignore patch application failures.

  If ignorePatchFailures is not set, pnpm would throw an error when patches with exact versions or version ranges fail to apply, and it would ignore failures from name-only patches.

  If ignorePatchFailures is explicitly set to false, pnpm would throw an error when any type of patch fails to apply.

  If ignorePatchFailures is explicitly set to true, pnpm would print a warning when any type of patch fails to apply.

Patch Changes

• Remove dependency paths from audit output to prevent out-of-memory errors #​9280.

v10.6.5

Compare Source

v10.6.4: pnpm 10.6.4

Compare Source

Patch Changes

• Fix pnpm dlx with --allow-build flag #​9263.
• Invalid Node.js version in use-node-version should not cause pnpm itself to break #​9276.
• The max amount of workers running for linking packages from the store has been reduced to 4 to achieve optimal results #​9286. The workers are performing many file system operations, so increasing the number of CPUs doesn't help performance after some point.

Platinum Sponsors

Gold Sponsors

v10.6.3

Compare Source

Patch Changes

• pnpm install --prod=false should not crash, when executed in a project with a pnpm-workspace.yaml file #​9233. This fixes regression introduced via #​9211.

• Add the missing node-options config to recursive run #​9180.

• Removed a branching code path that only executed when dedupe-peer-dependents=false. We believe this internal refactor will not result in behavior changes, but we expect it to make future pnpm versions behave more consistently for projects that override dedupe-peer-dependents to false. There should be less unique bugs from turning off dedupe-peer-dependents.

  See details in #​9259.

v10.6.2

Compare Source

Patch Changes

• pnpm self-update should always update the version in the packageManager field of package.json.
• Fix running pnpm CLI from pnpm CLI on Windows when the CLI is bundled to an executable #​8971.
• pnpm patch-commit will now use the same filesystem as the store directory to compare and create patch files.
• Don't show info output when --loglevel=error is used.
• peerDependencyRules should be set in pnpm-workspace.yaml to take effect.

v10.6.1

Compare Source

Patch Changes

• The pnpm CLI process should not stay hanging, when --silent reporting is used.
• When --loglevel is set to error, don't show installation summary, execution time, and big tarball download progress.
• Don't ignore pnpm.patchedDependencies from package.json #​9226.
• When executing the approve-builds command, if package.json contains onlyBuiltDependencies or ignoredBuiltDependencies, the selected dependency package will continue to be written into package.json.
• When a package version cannot be found in the package metadata, print the registry from which the package was fetched.

v10.6.0

Compare Source

Minor Changes

• pnpm-workspace.yaml can now hold all the settings that .npmrc accepts. The settings should use camelCase #​9211.

  pnpm-workspace.yaml example:

  verifyDepsBeforeRun: install
  optimisticRepeatInstall: true
  publicHoistPattern:
    - "*types*"
    - "!@​types/react"

• Projects using a file: dependency on a local tarball file (i.e. .tgz, .tar.gz, .tar) will see a performance improvement during installation. Previously, using a file: dependency on a tarball caused the lockfile resolution step to always run. The lockfile will now be considered up-to-date if the tarball is unchanged.

Patch Changes

• pnpm self-update should not leave a directory with a broken pnpm installation if the installation fails.
• fast-glob replace with tinyglobby to reduce the size of the pnpm CLI dependencies #​9169.
• pnpm deploy should not remove fields from the deployed package's package.json file #​9215.
• pnpm self-update should not read the pnpm settings from the package.json file in the current working directory.
• Fix pnpm deploy creating a package.json without the imports and license field #​9193.
• pnpm update -i should list only packages that have newer versions #​9206.
• Fix a bug causing entries in the catalogs section of the pnpm-lock.yaml file to be removed when dedupe-peer-dependents=false on a filtered install. #​9112

v10.5.2

Compare Source

Patch Changes

• The pnpm config set command should change the global .npmrc file by default.
  This was a regression introduced by #​9151 and shipped in pnpm v10.5.0.

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai generate docstrings to generate docstrings for this PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai plan to trigger planning for file edits and PR creation.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.