Beeline Smart Box N300 — ByeDPI Binary (Lexra Architecture)

Compiled ByeDPI binary file for the legendary Beeline Smart Box N300 router (as well as other Smart Box revisions based on Realtek chipsets).

This build is customized for the Lexra hardware architecture (modified MIPS, Realtek RTL8196E / RTL8197G, and similar chipsets) to operate directly on your home router.

---

🔍 Key Features / Optimization (SEO)

• Compatibility: Beeline Smart Box N300, Smart Box One (depending on the revision).
• Build Specifications: Compiled taking into account the limitations of older Linux kernels and the specific instruction sets of Realtek/Lexra processors.
• Stability: Fixed critical startup failure issues following a hard reboot of the device and process freezing/hanging during prolonged continuous operation.

---

🚀 Installation and Usage

1. Download the latest binary file from the Releases section: https://github.com/kuznec199/Beeline-byedpi/releases
2. Upload the file to your router (into the /tmp directory or onto a connected USB flash drive if using custom firmware like OpenWrt / Padavan / Keenetic).
3. Grant execution permissions to the file:

   chmod +x byedpi-lexra

4. Run ByeDPI with the required parameters (basic working example):

   ./byedpi-lexra --disorder 1 --split 2 --ttl 4

---

📝 Changelog

Version 1.1.0

• English:
  • Fixed a startup issue after a hard reboot.
  • Fixed freezing during prolonged operation.

---

ℹ️ Sources and Credits

This project is a custom build of the original ByeDPI tool.

• Original project source code: hresrcc/ByeDPI