-
Notifications
You must be signed in to change notification settings - Fork 1
2D and 3D Tools
Laser cutters, 3D printers and associated equipment at the space.
Status: ✅ OPERATIONAL
Caution
DO NOT adjust the laser power (current) knob, as this will shorten the life of the laser tube.
Important
Make sure the exhaust fan is running when performing any cutting.
Software is installed on the PC next to the laser cutter.
Max material size is 359mm x 227mm. Max cut size is 316mm x 216mm. x=0 is 26mm from left., y=0 is 2-3mm outside the material area.
Recommended to use Laser Ply or Acrylic
For cutting, max thickness is 4mm. Will require multiple passes.
- Software Download - At Scorchworks
- Software Reference Manual - At Scorchworks
- Useful Reference Website - K40 laser FAQ @ K40.se
- Status
- ✅ OPERATIONAL
- Nozzle
- 0.4mm
- Print volume
- 300x300x400mm
- Cura profile
- Creality CR-10S Pro
G28 ;Home
G29 ;Auto bed Level
M500 ; save mesh to eeprom
M420 S1 ;Save and use mesh
Status: ✅ OPERATIONAL
Nozzle: 0.4mm. Filament: 1.75mm PLA. Print volume of 220 x 220 x 250mm. No enclosure. Has been upgraded with a magnetic build plate.
Cura on the PC next to the laser cutter has been set up with a suitable profile.
- Manual - At Cocoon
Status: ✅ OPERATIONAL
Nozzle: 0.4mm. Filament: 1.75mm PLA. Print volume of 120 x 135 x 100mm. No enclosure. Magnetic build plate.
Cura on the PC next to the laser cutter has been set up with a suitable profile.
- Manuals and Guides - At Cocoon
Status: ❌ NOT OPERATIONAL
- Manual - At Lulzbot
- Quick Start Guide - At Lulzbot
Currently not operational (needs tuning and a general service, plus construction of an enclosure).
Nozzle: 0.5mm. Filament: 3mm PLA/ABS. Print volume of 298 x 275 x 250mm. No enclosure (currently). PEI build plate.
Cura on the PC next to the laser cutter has been set up with a suitable profile.
Nozzle: 0.7mm. Filament: 1.75mm PLA/ABS. Hand-held operation.
- Manual and Getting Started - At Cocoon
Used for sealing filament up with desiccant after drying so it stays dry. 28mm and 22mm wide plastic continuous pouch material available.
- Instruction Booklet - at Manuals.Lib