a collection of scripts for MikroTik RouterOS

IoTaWatt Open WiFi Electric Energy Monitor

OneWire slave device emulator

Combined Arduino library for reading multiple INA2xx power monitor devices

A macOS application displaying the thermal, voltage and current sensor values.

Apple SMC CLI tool that can decode and display temperature, fans, battery, power, voltage and current information

Arduino library for INA226 power sensor

The battery voltage is sensed using the ADC pin of the ESP32 and calibrated by averaging filtering and software（超详细注释，ADC电压检测）

Arduino firmware for a Lithium-Ion battery charger

INA219 full function driver library for general MCU and Linux.

Read values from thermal sensors, voltage meters, and current meters on iPhone/iPad

MCUVoltage measures the voltage supply (Vcc) of Arduino without extra components.

Arduino energy monitor, using SCT-013-030 current sensors

Simple code examples in M5Stick UiFlow (micropython)

lm-sensor and psutil alternatives for python from scrach

DitroniX IPEM ESP32 ATM90E32 ATM90E36 AT24C64 CH340 IoT Power Energy Monitor Board SDK

Thrust, voltage, amperage, and RPM sensing designed to replace the internal electronics in the Turnigy Thrust stand or a custom built stand, running on a Tiva C Launchpad with the IO Booster Pack.

Inductance and Resistance meter, Arduino based. Push button input. 3 tests, 4 resistor test ranges. One Inductance test, Analog input display , outputs to serial monitor and OLED. Resistor range is from 0 ohms to 2 Mohms , Inductor range is 80uH to 30,000uH.

An SRAM IP Uniquely designed with open source tools. Static RAM is a type of random-access memory that uses latching circuitry (flip-flop) to store each bit. The size of SRAM specs is 32kbit/4k bytes with 1.8v. A 6T SRAM pairs up with two access transistors for read, write state and cross coupled inverter to hold/regenerate the state.